Technaxx TX-139 User manual

Technaxx®* User Manual
DAB+ Bluetooth Soundbar TX-139
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby
declares that this device, to which this user manual belongs, complies
with the essential requirements of the standards referred to the Directive
RED 2014/53/EU. The Declaration of Conformity you find here:
www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”).
Before using the device the first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute
from German fixed-line and 42 cent/minute from mobile networks).
Free Email: [e-mail]
The support hotline is available Mon-Fri from 9 am to 1 pm & 2 pm to 5
pm
Keep this user manual for future reference or product sharing carefully.
Do the same with the original accessories for this product. In case of
warranty, please contact the dealer or the store where you bought this
product. Warranty 2 years
Enjoy your product. *Share your experience and opinion on one of
the well-known internet portals.
Features
•Soundbar with DAB+ & FM-radio, Bluetooth V5.0, optical
output, HDMI ARC, USB and AUX-IN
•Pairing with Bluetooth-enabled audio devices,
Smartphones, Tablets, etc.
•USB media play for up to 64GB
•DAB+/FM coaxial antenna included
•LED effect light with 7 selectable colours
•Illuminated LCD display (2,7x1,5cm)
•Clock & Alarm function
•Remote control

Technical specifications
Bluetooth
BT Version V5.0
Transmitting distance <10m (open space)
Frequency band 2.4GHz
Radiated transmission power max. 2.5mW
Modes
DAB + / FM / BT / USB flash disk / HDMI ARC
/ optical out / AUX-IN
FM frequency band
87.5-108MHz
DAB+ frequency band
170-240MHz
USB capacity
Up to 64GB
Music format
MP3 / WAV
AUX-connector
3.5mm
Loudspeaker /
frequency / impedance
4x10W Ø57mm / 100Hz-20kHz / 4Ω
SNR / DAB+ sensitivity
≥80db /-101dB
Power input
DC 18V / 3A
Operating temperature
0°C up to +40°C
Material
PC / ABS / Texture mesh
External antenna
SMA connector, length:2m
Weight / dimension
1.9kg / (L) 97.5 x (W) 7.5 x (H)
7.2cm
Package content
Technaxx® DAB+ Bluetooth
Soundbar TX-139, AC adapter, AUX
cable, DAB+ antenna, remote
control, user manual
Hints for Environment Protection: Packages materials are
raw materials and can be recycled. Do not disposal old
devices or batteries into the domestic waste. Cleaning:
Protect the device from contamination and pollution. Avoid
using rough, coarse-grained materials or solvents/aggressive
cleaner. Wipe the cleaned device accurately. Distributor:
Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388
Frankfurt a.M., Germany

Product details
1
Infrared receiving head
9
Aux interface
2
Display screen
10
USB interface
3
Previous song / vol -
11
DC power interface
4
Play / pause
12
HDMI interface
5
Next song / vol +
13
Optical fibre interface
6
Power / Stand-by
14
Antenna interface (SMA)
7
Mode
15
LED light
8
LED light control
16
Wall mount
Remote control
1
Power
2
Mode
3
Volume +
4
Previous song / station
5
DAB+ Info
6
Preset
7
Mute
8
Play / pause
9
Next song / station
10
Volume -
11
Menu
12
Scan
13
LED














First use
Connect the soundbar with the power adapter cable (11) and a
socket. Connect the included antenna with the antenna interface
(14) and place the antenna near a window, a spot with low
radiation of other electric devices to avoid signal distortion.
Press and hold the power button (6) for three seconds. The
soundbar starts up in DAB mode. Now it searches for DAB
stations automatically. You can also use the soundbar with
Bluetooth, AUX-In, USB stick, optical in or HDMI ARC. With the
mode button (7) you can change the mode from Bluetooth to
AUX, USB, FM/DAB+-radio, optical in or HDMI ARC.
Modes
Switch through the modes by press the mode button (7) on the
soundbar or the mode button on the remote control (2).
Bluetooth Mode
The speaker must be powered on before you begin to initiate the
pairing. Pairing is the process of establishing a link between
TX-139 and a Bluetooth device.
Note: Activate the Bluetooth feature on the phone, and set the
phone to search for Bluetooth devices. Check the user guide of
your phone for instructions.
Select the soundbar „Technaxx TX-139“ from the list of found
devices. When asked the PIN code, please enter “0000” to pair
the speaker to your phone.
If the pairing is successful, you will hear a connection sound and
the speaker enters idle state.
Auto reconnection
When the TX-139 is in off state, switch it on and it will reconnect
automatically to the last connected device if it is reachable.

USB mode
Plug in a USB stick with max. 64GB (formatted in exFAT/FAT32).
Switch to USB mode. Now you can play the tracks one by one.
Note: No folder selection possible.
AUX-Mode
You can play music directly from a device connected via an AUX
cable. Plug one end of 3.5mm AUX–IN cable into AUX–IN
connector (9) and the other end into AUX-OUT (Headphone jack)
connector of MP3 Player, Smartphone, PC or CD player to listen
to music.
Press the mode button (7) briefly several times to switch to AUX-
IN mode. To adjust the volume, press the volume down and
volume up buttons on the external device and on the TX-139.
Note: Under AUX-mode, only vol–/vol+ work. By pressing
play/pause you can mute the device but the song plays along,
because it is coming from an external device. Switch songs on
the external device in AUX-mode.
Radio mode (DAB+ / FM)
Connect the included antenna with the soundbar to receive
DAB+ and FM radio signal. Place the antenna near a window, a
spot with low radiation of other electric devices to avoid signal
distortion. Screw the male connector to the SMA connector (14)
on the soundbar.
Briefly press the mode button (7) until you switch to Radio mode.
You can choose between digital radio (DAB+) and FM radio (FM).
The automatic station searches and the automatically storage of
the found stations can be started by press and hold the
play/pause button (4) or press on scan (12) at the remote control.
Press the next track or previous track button to switch between
the stored stations. Press the play/pause button to confirm a
station. Adjust the volume by press and hold the volume down
(3) and volume up button (5).
Note: Radio stations are saved and stored in the found order. It
is not possible to change the order of the found radio stations or
set favourites.

HDMI ARC
Note: Please check if your television supports HDMI ARC first.
The HDMI connector should be labelled with “(HDMI-) ARC” or
refer to the user manual of your television for more information.
Plug a HDMI ARC supported cable in the HDMI ARC port (12) at
the soundbar. Switch to the mode HDMI. Now the soundbar is
connected to your television. The volume adjustment can be
done with the TV remote control.
In some cases, there are additional settings which must be
activated in the TV options. Please refer to the user manual of
your TV separately to avoid misunderstandings.
LED backlight
Turn on the LED by press the “LED” button (8) on the device or
press LED button on the remote control (13).
To change between the colours, single press the light button.
The colours are following: White / blue / green / red / turquoise /
purple / yellow.
Note: The light is in off-state again after the last colour.
Menu
Enter the menu with the press and hold on the mode button (7)
or with press the remote-control menu button (11). Navigate with
prev/next button and enter an option with play/pause.
Options are Time/Date, Alarm1, Alarm2, Sleep time, Factory
reset, System version, Backlight, Contrast.
Exit with the mode button at the device or menu button at the
remote.
Time/Date
To adjust the date and the time press previous track/next track
and confirm with play/pause button

Alarm Clock
You can set up two alarms on the TX-139. To adjust the alarm,
use previous track / next track to choose Alarm: on, set the
hour, set the minute, set the volume and set the mode (alarm,
DAB+ or FM). Use Play/Pause button to confirm the input.
When the alarm starts, press Play/Pause button to activate the
snooze function. TX-139 starts alarming again after 9 minutes.
To exit, press power.
Note: If you want to be woken up and the TX-139 should not
play music all night. Press the power button to enter standby
mode.
Sleep time
To adjust the sleep time, press previous track / next track to set
the counter between 5 and 120 minutes (5, 15, 30, 60, 90,
120min). Use Play/Pause button to confirm the input. After the
set time TX-139 turns into standby mode.
Factory reset
To set the device back to factory settings choose “Yes”. Choose
“No”for cancel. Use play/pause button to confirm the input.
System version
Look up the firmware version here.
Backlight
Set the time how long it should take the backlight to go off. Set
it by pressing previous track / next track. Use play/pause button
to confirm the input.
Contrast
Set the contrast (0-31) by pressing previous track / next track.
Use play/pause button to confirm the input.

Troubleshooting
If the TX-139 fails to link to your mobile device or if it fails to play
music after being connected, the user shall check if your mobile
device supports A2DP. If you cannot connect the TX-139 to your
phone, do as follows:
●Ensure that the speaker is in on-state. Ensure that the
Bluetooth feature is activated on your phone. ●Check that the
speaker is within 10m of your phone and that there are no
obstructions between the speaker and the phone, such as walls
or other electronic devices. ●The TX-139 powers off or does not
turn on again could be a problem with the power supply. ●If the
speaker has problems to play sound files from USB, please
check the correct formatting of the sources. They should be
formatted in exFAT / NTFS. ●The maximum supported data
storage is 64GB. The USB port doesn’t support any external hard
disk drive (HDD).
Warnings
● Do not disassemble the TX-139, it may result in short-circuit or
damage. ●Battery warning: Improper use of the battery may
cause fire or chemical burns. The battery may explode in case of
damage. ●When the device works under AUX–IN mode, do not
(!) increase the volume of your mobile phone, PC, MP3/MP4
Player, CD, DVD etc. to a large extend; a sonic boom or sound
distortion may occur. In that case, decrease volume either of
mobile phone, PC, MP3/MP4 Player, CD, DVD or device. The
sound gets normal soon. ●Do not modify, repair or remove
without professional guidance. ● Do not use corrosive or volatile
liquid for cleaning. ● Do not drop or shake the BT-X53, it may
break internal circuit boards or mechanics. ● Keep the BT-X53 in
dry and ventilated environment. Avoid high humidity and high
temperature. ● This TX-139 is not water-resistant; keep it away
from moisture. ● Keep the device away from little children.