Technische Alternative UVR67 User manual

1
11111111111111111111111
11111111111111111111111
11111111111111111111111
11111111111111111111111
11111111111111111111111
11111111111111111111111
11111111111111111111111
11111111111111111111111
11111111111111111111111
11111111111111111111111
11111111111111111111111
Please read before commissioning!
This booklet explains the basic operation of the UVR67 controller. More detailed information on op-
eration, programs and installation can be found in the enclosed booklets or on www.ta.co.at.
Scan this QR code for a link to a video tutorial on our official YouTube
channel! (German only)
Basic operation
The display (1) on the front shows information about sensor values, menu position, parameterisa-
tion, etc.
The bar (2) on the right of the display moves along with the vertical position in the currently open
menu. (Scroll bar)
The dial (3) to the right of the display is used for navigation. A clockwise rotation moves you down
the menu; anti-clockwise moves you up.
Pressing the dial (3) opens the selected menu/allows you to change the selected value/parameter.
(= Enter button)
Pressing the button (4) to the left of the dial exits a menu. (= Back button)
Pressing "Enter" (3) or "Back" (4) relates to the value/menu item with a border around it on the dis-
play.
Technische Alternative RT GmbH UVR67
A-3872 Amaliendorf, Langestraße 124
Tel [phone] [email protected] Manual Version
1.05
1

2
User levels and password entry
The majority of all setting options are password-protected to prevent unauthorised persons from op-
erating the controller. There are three user levels:
•User
• Can change time and date information, and otherwise only view values.
• Technician
• Additional access to the technician level, where e.g. parameters and manual mode of the
outputs can be changed.
•Expert
• Access to all setting options on the controller.
The expert password is therefore required to be able to operate the controller fully. It is factory set
to 64.
Example: Password entry for expert access and program selection
Turn the dial clockwise until there is a border around the entry User in
the main menu. To confirm, press the dial (= Enter key).
The active user is always shown in bold in this menu. In the illustra-
tion this is the User.
Turn the dial clockwise until there is a border around Expert. Press
the dial to confirm.
The password query for expert access appears. Enter the password
digit by digit. To do so, press the dial, which opens a column for
selecting the first digit.
Turn the dial clockwise to scroll down until the required number is
highlighted. In the example, the default password for expert access is
entered, 64. You therefore scroll to the first digit 6and confirm by
pressing the dial.
The first digit has been entered.
To enter the second digit, turn
the dial one notch clockwise. The
arrow moves to the blank space
next to the digit you have already
entered.

3
Press the dial to open the entry again and select 4. Press the dial to
confirm.
Once the full password has been entered, the entire entry still needs
to be confirmed. Turn the dial clockwise until there is a bold border
around the tick. Then press the dial.
In the example, the Expert is now shown in bold; there is now expert
access to the controller. If the expert is not shown in bold, the pass-
word was not entered successfully. The expert password may have
been changed by another user.
The settings that can now be made with expert access are in a differ-
ent menu. Press Back to return to the main menu. From there, navi-
gate to the item Settings (turn the dial anti-clockwise to navigate
upwards in the menu).
Press the dial to open the menu.
The items Technician level and Expert level are now available.
Technician level contains settings such as parameters (temperature
thresholds, etc.), time programs and datalogging.
Expert level contains the program selection, settings for inputs and
outputs, and other fundamental points.
Go to the program selection: Turn the dial clockwise until there is a
border around Expert level. Press the dial to open the expert level.
This menu contains a large number of settings. In our example, the
program is to be changed, so the menu Programming settings is
opened.

4
When making any settings and carrying out any installation work, please observe the other enclosed
instructions, especially the safety instructions they contain.
Subject to technical modifications as well as typographical and printing errors. This manual is only
valid for devices with the corresponding firmware version. Our products are subject to constant tech-
nical advancement and further development. We therefore reserve the right to make changes without
prior notice. © 2019
In this menu you need to look out for the bold border again. In the ex-
ample there is a border around Program. The number 0below it is the
set value.
If the program is to be changed, press the dial in the usual way while
the bold border is shown around "Program".
The display 0-999 is the setting range. The number below this (with a
red border) is the current value.
If the dial is turned clockwise, the program number is increased by one
with each notch. Turn anti-clockwise to decrease the number.
Once the required number has been reached, confirm by pressing the
dial.
Press Back to cancel the entry.
The program has been set successfully.
After setting the program, the Pa-
rameters at the Technician level
need to be adapted according to
the selected program and the local
conditions.