technoswitch CR035WB User manual

WALL MOUNTED WEEKLY TOUCH PROGRAMMABLE THERMOSTAT - WIFI

02

03

Decrease
KEYS LEGEND
DISPLAY LEGEND
Menu
Increase
Confirm
Scrolls the next icon
ON/OFF - Manual/Automatic
Temperature levels
Days of week
Current time (Clock)
Energy consumption savings indicator
Set temperature / Humidity
Set temperature thresholds
WiFi
Cooling mode
Heating mode
Ambient Temperature
Automatic Mode
Set temperature levels
Statistics
COUNT-DOWN
COMMAND AND INDICATIONS
04

Manual Mode
Frost protection
Off
21.
22.
23.
24. Relative humidity
Note: when the programmable thermostat is in Stand-by, press to start the backlight. Now it can be set.
05

1. Installation
page
2. Factory Setting
3. On / Off
4. Set Day And Time
5. Daily Programming Of Temperatures
6. Lock Setting
7. Reset
7
9
9
10
10
11
11
1. Configuration
2. On / Off
3. Automatic / Manual Mode
4. Automatic / Manual Mode
5. Delete Program
6. Language Setting
12
13
13
15
17
18
INDEX
APP QUICK GUIDE
06

The device must be positioned about 1.5 meters above the floor, avoiding heat sources, windows and doors.
It must be installed on the wall or on recessed boxes with 2 or 3 modules, in dry places.
To install the programmable thermostat it is necessary:
• Unhook the base from the thermostat. • Fix the base to the wall. • Connect the external temperature probe.• Hook the base to the wall. Fig.1A e 2AFig.1B e 2BFig.3AFig.4A07
INSTALLATION
Connect the load to the terminals following the wiring diagram. WIRING DIAGRAM
ASSEMBLY INSTRUCTION
1
Fig.2AFig.3AFig.4AFig.1A
Pressare
Sollevare
1.0

08
WIRING DIAGRAM
Fig. 1B
Fig. 2B
PROBE
PROBE
RELE’
RELE’
PUMP VALVE
MOTORIZED
230 Vac
230 Vac
Open
MClosed
NC
NA
C
NC
NA
C
BOILER

09
For faster use, the programmable thermostat is supplied with set programs:
• Heating program. Temperature levels: (T1) = 14°C (T2)= 18°C (T3) = 22°C • Cooling Program. Temperature levels: (T1) = 24°C (T2) = 26°C (T3) = 28°C• Frost protection function: + 5 ° C settable, active only in heating mode. • Set temperature for MANUAL mode: +22°C.Press for 3 seconds.
FACTORY SETTING2.0
ON / OFF3.0

10
Press the icons in sequence : the clock flashes confirm with use or to set
hour/minutes confirming with , the day value (Monday) flashes press and select the desired
day that will start to flash confirm with .
It can customize the temperature levels at 30 minute intervals.
Press the icons in sequence : up to position on pressing , the day value flashes
confirm with use or to set the desired temperature range at that time press to move on the
next half hour and choose the desired temperature range and continue in the same way until you reach 11:30 pm
pressing , the days and flash alternately. Now you can:
a) Copy the program from Monday to Tuesday pressing ;
b) Set the Tuesday program pressing and confirm with .
Repeat the same steps to copy/set the other days.
SET DAY AND TIME4.0
DAILY PROGRAMMING OF TEMPERATURES5.0

11
Press the icons in sequence : ( + ) for 3 seconds and rSt appears.
Per maggiori info consultare il manuale installatore sul nostro sito (tecnoswitch.com).
The programmable thermostat is provided with a 3 digit Lock Code.
Press the icons in sequence : ( + ) for 3 seconds up to position on PAS use
or to set the first digit press to set to the other two digits confirm with .
To deactivate it, repeat the same steps.
LOCK SETTING
6.0
RESET
7.0

12
(Fig.3) (Fig.3) (Fig.3)
QUIK GUIDE APP
CONFIGURATION1.0
Download the free APP “Crono feel” from the official stores .
Programmable Thermostat Configuration:
To turn on the wi-fi module, press the icons in sequence : up to position on confirm with .
flashes confirm with .
Smartphone Configuration:
• Turn on GPS and Wi-Fi;• Connect the smartphone to the programmable thermostat; • Start the App; • Enter the required data.

13
->
(Fig.4) (Fig.5)
(Fig.6)
Press to switch on / off the programmable thermostat. Fig.A
•Press to enable MANUAL MODE;
To set the temperarure:
• Press ; •Place your finger inside the yellow circle and scroll up or down to increase or decrease the temperature; ON / OFF2.0
AUTOMATIC / MANUAL MODE3.0
->

14
-> ->
-> ->
->
Confirm with (Fig.7);
Press to enable AUTOMATIC MODE. (Fig.8).
(Fig.8)

15
PROGRAMMAZIONE SETTIMANALE4.0
•Follow to weekly programming Fig.9

16
-> ->
-> ->
Place your finger inside the yellow circle and scroll up or down
to set the desired time range ; (Fig.10);
• Press / / to set the desired temperature range at that time; (Fig.11)
• After programming, confirm with ; (Fig.12)
• To copy the programming, for example, Monday to Tuesday, press and (Fig.13);
• To set, for example, the Wednesday program, press (Fig.13) and press (Fig.14);
WENDSDAY

17
->
-> ->
->
->
->
(Fig.11) (Fig.12) (Fig.13) (Fig.14)
Enter the program to be deleted,
press and confirm with
DELETE PROGRAM5.0

Follow to set language
LANGUAGE SETTING6.0
18

Tecno Switch reserves the right to make changes to its products in each
moment and without further notice.
Tecno Switch declines all responsibility for damage to things or persons
derived from an incorrect or improper use of its products.
Pursuant to Legislative Decree No. 49 of March 14, 2014 “ Implementation of Directive
2012/19/EU on waste electrical and electronic equipment (WEEE)”
The “crossed out wheelie bin” WEEE symbol on the appliance show that the product, at the
end of its useful life, must be collected separately from other waste. Therefore, the user must
provide the equipment with the essential components at the recycling centre for electronic and
electrotechnical devices, or return it to the dealer when you purchase an equivalent appliance
in one-to-pne reason, or 1 to zero for equipment with a side lower than 25cm. The correct
recycling helps to avoid possible negative effects on the environment and on health, favoring the
recycling of the materials that make up the equipment. The illegal disposal of the product
by the user involves administrative sanctions aas per Legislative Decree No. 49 of March 14,
2014.

REV.11-20