Mi-Heat TC-500 Wifi User manual

Sockets thermostat TC-500 Wifi
Thank you for choosing our smart
socket outlet thermostat TC-500 Wifi
Features:
•Programmable / operable via app
•Compatible with Amazon Alexa, Google Assistant and IFTTT
•Easy to install
•Simple 3-button operation
•Heating and cooling mode
•Integrated heat pump protection
•Simply structured display
Technical data:
•Operating voltage: 230Vac
•Switching capacity: 3600W/16A (resistive load) /3A capacitive load
•Backup memory: EEPROM
•Temperature sensor: internal or external sensor
•Temperature setting: 5°C - 35°C (Standard value: 28°C)
•Operating temperature: +5 ~ 65°C
•Accuracy: +/- 0.5°C (+/- 1°F)
•Dimensions: 70 x 41.5 x 140mm
•Colour: White
•IP protection class: 20 (Sensor IP44)
•Certification: CE

App integration and programming:
In order to setup or program the thermostat via Smartphone App, the free TuyaSmart App must first be
downloaded and installed from the respective App Store.
Minimum Smartphone requirements: iOS9 or newer, Android 4.1 or newer
TuyaSmart (Tuya Inc.)
App für Android
App für Apple iOS
The following steps show the setup of the TuyaSmart App as well as the integration and programming of
the thermostat.
When starting the app for the first time,
you have to create a Tuya user account.
Agree to privacy policy to continue.
Select your country, enter your email
address, and then tapping on "Get
Verification Code". Alternatively, the code
can also be requested by SMS by tapping
on "Mobile Phone Number" at the top.

Enter the verification code you received by
e-mail or SMS.
Set the password for the Tuya user
account and press "Finish".
Now the thermostat can be integrated by
touching "Add device".
To integrate a thermostat, tap on " Small
Home Appliance" on the left and then
select "Thermostat" or "Thermostat (Wi-
Fi)" on the right.
Do not select Bluethooth, Zigbee, BLE+Wi-
Fi!
Select the WLAN network (SSID) of the
existing router and enter the
corresponding WLAN password.
Set the thermostat to teach-in mode: Press
the on/off key on the thermostat for
approx. 3 seconds until "11" appears on
the display (if necessary, unlock the keys
first). Now briefly press the "+" key, the
"11" should now flash and the thermostat
is in teach-in mode.
Now in the app first tap on "Confirm
indicator rapidly blink" and then on
"Next".

The app now searches for devices that are
in learning mode.
If a device was found, a name can now be
assigned. After touching "Done", the
integration of the thermostat is
successfully completed.
The picture shows the main view of the
thermostat. The setpoint temperature is
shown in the centre of the display and the
current room temperature is shown
below. The setpoint temperature can be
adjusted manually using the plus/minus
key. The functions of the buttons "Switch",
"Mode", "Settings", "Pen symbol" are
explained in Figures 13, 14, 15 and 18.
The thermostat can be switched on or off
by touching "Switch".
Touch "Mode" to change the operating
mode of the thermostat (Auto/Manual).
Touch "Settings" to set the heating/cooling
mode, the childlock, the weekly
programme (figure 16) and the timer
(figure 17).

An individual heating profile can be stored
here for each day of the week.
Here, different timers can be programmed
to switch the timer on or off.
Shows the further settings and integration
possibilities in the language control
systems Amazon Alexa and Google
Assistant.

Manual setting / programming:
To enter the setting menu, press and hold the "+" and "-" keys for approx. 4 seconds while they are
switched off (no display).
You can switch between the different setting levels by repeatedly pressing the On/Off key (centre key). You
can change the values of the respective setting with the "+" and "-" keys.
The following setting options are available:
Nr.
Funktion
Einstellbereich
Standartwert
01
Temp. Calibration (calibration of the
temperature sensor)
-9°C - +9°C
0°C
02
Mode (heating or cooling mode)
0 = Cooling, 1 = Heating
0 = Cooling
03
Sensor Mode (External, or room sensor)
0 = Room, 1 = External
1 = External
04
Dead Band / Hysteresis (Switching
temperature range)
0.5 bis 9 °C
0.5 °C
05
Heat pump protection
0 = Aus, 1 = An
1 = An
06
Mode Select (PRG = Automatic, MAN =
Manuel)
0 = MAN Mode, 1 = PRG
0 = MAN Mode
07
Lock/Unlock (Key lock)
0 = Unlock, 1 = Lock
0 = Unlock
08
Reset (Reset to factory settings)
0 = No, 1 = Yes
0 = No
09/10
Software Version (Not changeable)
-
-
The configuration menu is left automatically after approx. 10 seconds without an entry.
Release the key lock:
To release the key lock (display shows only 7), press and hold keys "+" and "-" simultaneously for about 4
seconds.
The heat pump protection:
If the heat pump protection is activated, the thermostat switches the connected device on for approx. 30
seconds every 11 hours, regardless of the set temperature.

Description Display indications:
The display shows the current room temperature in the centre (depending on the setting of the
internal/external sensor). In addition, the following modes are displayed, provided they are active:
= Heating mode
= Cooling mode
= Heat pump protection On
= Heat pump protection Off
= Use of external temperature sensor
= Use of internal temperature sensor
= Connected with WLAN
= Flashes when setting the target temperature
= Symbol visible = consumer on
= Auto (weekly programme) active

Disposal notes
Do not dispose of this device in household waste! Electronic devices must be
disposed of at the local collection points for electronic waste in accordance with
the Waste Electrical and Electronic Equipment Directive.
Note on conformity
The CE mark is a free trade mark that is exclusively addressed to the authorities
and does not contain any assurance of properties.
Dokumentation © 2020 Mi-Heat Heizsysteme GmbH
All rights reserved. No part of this manual may be reproduced in any form or by any means without the
written permission of the publisher. This manual may contain typographical defects or misprints. We
assume no liability for technical or printing errors and their consequences.
V1.1 (11/2020)
Mi-Heat Heizsysteme GmbH
Ol Streek 39a
26607 Aurich
Germany
Internet: mi-heat.com
E-Mail: [e-mail]