TECO RG57A3/BGEF User manual

REMOTE CONTROL USER'S MANUAL
Inverter Split Systems
Comfort & 3D DC Inverter Series
Thank you very much for purchasing TECO air conditioner.
•Please read this user's manual carefully before using your air conditioner.
•Keep this manual in a safe place for furture reference.
The design and specifications are subject to change without prior notice for
product improvement. Consult with the sales agency or manufacturer for details.
REPAIRS, SERVICE & WARRANTY
It is hazardous for anyone installing, removing, altering, repairing,
servicing, or testing.
Only an Authorised Service Person can carry out servicing or repairs to
this appliance.
IF SERVICE IS REQUIRED
If you have a problem, and the problem persists after you have made the
checks mentioned in this manual, contact:
TECO Australia Service Department on 1300 660 037
(9am to 4pm AEST Mon to Fri) Email: [email protected]
For warranty details please visit www.teco.com.au
Complete and retain the following information:
Name of retailer: _________________________________
Date of purchase: ________________________________
Model No. : _____________________________________
Serial No. : _____________________________________
MFG code: _____________________________________
Please retain proof of purchase for warranty claims.
GBG-PV4E&OE

1
CONTENTS
2
Model
Rated Voltage
8m
3.0V (Dry batteries R03/LR03×2)
Comfort Series RG57A3/BGEF / 3D DC Inverter Series RG57A4/BGEF
Remote Control Specifications
Environment
Signal Receiving
Range
- 5°C ~ 60°C
MODE
FAN
TEMP
SLEEP FRESH
LED FOLL OW ME
TURBO SE LF CLEAN
ON/OFF
SHORT
CUT
TIMER
ON
TIMER
OFF
2
3
6
7
7
8
9
Handling The Remote Control ......................................................... 13
Remote Control Specifications.........................................................
Features ..............................................................................................
LCD Display .......................................................................................
Operation.............................................................................................
COOL / HEAT / FAN Operation........................................................
DRY Operation ...................................................................................
TIMER Operation................................................................................
AUTO Operation................................................................................. 7
c
MODE
FAN
TEMP
SLEEP FRESH
LED FOLL OW ME
TURBO SE LF CLEAN
ON/OFF
SILENT
FP
TIMER
ON
TIMER
OFF
c
Comfort Series (RG57A 3/BGEF)
3D DC Inverter Series (RG57A4/BGEF)

34
MODE
FAN
TEMP
SLEEP FRESH
LED FOLLOW ME
TURBO SELF CLE AN
ON/OF F
TIMER
ON
TIMER
OFF
1
2
4
5
3
9
10
8
6
7
11
12
13
14
1
2
3
4
5
For the detail, see sleep operation in
USER S MANUAL.
NOTE: While the unit is running under SLEEP
mode, it would be canceled if MODE, FAN
SPEED or ON/OFF button is pressed.
FRESH Button (Not applicable)
,
,, ,,
,,
,,
ON/OFF Button
This button turns the air conditioner ON
and OFF.
MODE Button
Press this button to modify the air conditioner
mode in a sequence of following:
AUTO COOL
DRY
HEAT FAN
FAN Button
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
NOTE: You can not switch the fan speed in
AUTO or DRY mode.
SLEEP Button
Active/Disable sleep function. It can maintain
the most comfortable temperature and save
energy. This function is available on COOL,
HEAT or AUTO mode only .
7
SELF CLEAN Button
Active/Disable Self Clean function. Indoor
unit will run at special combined mode to
blow and dry indoor evaporator for a period
of time before switch off.
Features
8
10
9
Features
6
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temper-
ature at cooling or heating operation in the
shortest time(if the indoor unit does not
support this function, there is no
corresponding operation happened when
pressing this button.)
MODE
FAN
TEMP
SLEEP FRESH
LED FOLLOW ME
TURBO SELF CLE AN
ON/OF F
TIMER
ON
TIMER
OFF
1
2
4
5
3
9
10
8
6
7
11
12
13
14
MODE
FAN
TEMP
SLEEP FRESH
LED FOLLOW ME
TURBO SELF CLE AN
ON/OF F
TIMER
ON
TIMER
OFF
1
2
4
5
3
9
10
8
6
7
11
12
13
14
UP Button ( )
Push this button to increase the indoor
temperature setting in 1oC increments to 30oC.
DOWN Button ( )
Push this button to decrease the indoor
temperature setting in 1oC increments to 17oC.
SHORTCUT Button (Comfort Series)
Used to restore the current settings or resume
previous settings.
On the first time connecting to the power,
if the SHORTCUT button is pressed, the unit
will operate on AUTO mode, 24°C, and fan
speed is Auto.
If this button is pushed when the system is on,
the system will automatically revert
back to the previous settings including
operating mode, setting temperature, fan
speed level and sleep feature.
If pushed for more than 2 seconds, the system
will automatically restore the current operation
settings including operating mode,
temperature settings, fan speed level and
sleep feature.
SILENCE Button (3D DC Inverter Series)
Press once to Active/Disable Quiet function.
This will lower the fan speed to breeze.
FP Button (3D DC Inverter Series)
In heating operation, press and hold for 2
seconds to Active/Disable Freeze Protection
function. The preset temperature can be low
as 8°C, which keeps room temperature steady
at 8°C and prevents the house from freezing
when it is unoccupied in severe cold weather.
TIMER ON Button
Press this button to initiate the auto-on
time sequence. Each press will increase the
auto-timed setting in 30 minutes increments.
When the setting time displays 10H, each
press will increase the auto-timed setting 60
minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0H.

12
14
13
FOLLOW ME Button
Push this button to initiate the Follow Me
feature, the remote display actual
temperature at its location. The remote
control will send this signal to the air
conditioner every 3 minutes interval until the
Follow Me button is pressed again. The air
conditioner will cancel the Follow Me feature
automatically if it does not receive the signal
within any 7 minutes interval.
LED Button
Disable/Active indoor screen Display. When
pushing the button, the indoor screen display
is cleared, press it again to activate the
display.
LCD Display
Fan speed indication
Mode display
Information are displayed when
the remote control is powered up.
Displayed when data is transmitting.
Displayed when remote controller is ON.
Battery display (low battery detection)
Low speed
Medium speed
High speed
Auto fan speed
Note:
All indicators shown above are for presentation
purpose only. During the actual operation only the
active indicators are shown on the display window.
Displayed when TIMER ON time is set.
Displayed in SLEEP Mode operation.
Indicated that the air conditioner is
operating in FOLLOW ME mode
Displayed when TIMER OFF time is set.
Show set temperature or room
temperature, or time under TIMER
setting.
AUTO
HEAT FAN
COOL DRY
56
Features
MMOODDEE
FAFANN
TTEEMMPP
SSLLEEEEPP FFRREESSHH
LLEED D FFOO LLLLOOW W MMEE
TTUURR BB O O SSEE LLF F CCLLEEAANN
OONN//OOFFFF
TTIIMMEERR
OONN
TTIIMMEERR
OOFFFF
11
22
44
55
33
99
1010
88
66
77
1111
1212
1313
1414
C
11
TIMER OFF Button
Press this button to initiate the auto-off time
sequence. Each press will increase the auto -
timed setting in 30 minutes increments.
When the setting time displays 10H, each
press will increase the auto-timed setting
60 minutes increments. To cancel the auto-
timed program, simply adjust the auto-off
time to 0.0H.
Swing Button
Used to stop or start auto swing horizontal louvre
movement or set the desired up/down air flow
direction. The louvre changes 6 degree in angle
for each press. If pressed for more than 2
seconds, the louvre will swing up and down
automatically.
Swing Button (For 3D DC Inverter Series Only)
Used to stop or start auto swing feature of
vertical louvre movement or set the desired left
right air flow direction. The vertical louvre
changes 6 degree in angle for each press. If
pressed for more than 2 seconds, the louvre will
swing left and right automatically.

7
Operations
COOL / HEAT / FAN Operation
1. Press the MODE button to select COOL,
HEAT or FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 17OC~ 30OC in 1OC
increments.
3. Press the FAN button to select the fan
speed in four steps- Auto, Low, Med,or
High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the temperature setting is
not displayed, neither adjustable.
AUTO Operation
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of 17°C~ 30°C in 1°C
increments.
3. Press the ON/OFF button to start the air
conditioner.
1. In the Auto mode, the air conditioner will
automatically switch between Cooling, Fan,
and Heating mode by sensing the difference
between the actual ambient room
temperature and the setting temperature on
the remote controller.
2. In the Auto mode, the fan speed is
automatically controlled.
MODE
FAN
TEMP
SLEEP FRESH
LED FOLLOW ME
TURBO SELF CLE AN
ON/OF F
TIMER
ON
TIMER
OFF
3
1
2
DRY Operation
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the desired
temperature. The temperature
can be set within a range of 17OC~ 30OC
in 1OC increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dry
mode, you can not select the fan
speed. It is automatically controlled by the
system.
MODE
FAN
TEMP
SLEEP FRESH
LED FOLLOW ME
TURBO SELF CLE AN
ON/OF F
TIMER
ON
TIMER
OFF
3
1
2
78
NOTE

2
1
TIMER Operation
1. Press the TIMER ON button. The remote
control shows TIMER ON, the last Auto-on
setting time and the symbol "H" will be shown
on the LCD display window. Now it is ready to
reset the Auto-on time to START the operation.
2.
3.
Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
the time increases by half an hour between 0
and 10 hours and by one hour between 10 and
24 hours.
After setting the TIMER ON, there will be a one
second delay before the remote control transmits
the signal to the air conditioner. Then, after
approximately another 2 seconds, the symbol "H"
will disappear and the set temperature will re-
appear on the LCD display window.
Press the TIMER ON button to select the auto-
on time for the unit. Press the TIMER OFF
button to select the auto-off time for the unit.
To set the Auto-on time.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the symbol "H" will be shown on
the LCD display window. Now it is ready to reset
the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set desired
Auto-off time. Each time you press the button, the
time increases by half an hour between 0 and 10
hours and by one hour between 10 and 24 hours.
3. After setting the TIMER OFF, there will be a one
second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
symbol "H" will disappear and the set temperature
will re-appear on the LCD display window.
MODE
FAN
TEMP
SLEEP FRESH
LED FOLLOW ME
TURBO SELF CLE AN
ON/OF F
TIMER
ON
TIMER
OFF
! CAUTION
When you select the timer operation, the remote controller automatically transmits the
timer signal to the indoor unit for the specified time. Therefore, keep the remote
controller in a location where the indoor unit can receive the signal. The effective
operation time set by the remote controller for the timer function
is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,
5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20,
21, 22, 23 and 24.
Example of timer setting
Start
Off
6 hours later
(Auto-on Operation)
The TIMER ON feature is useful when you want
the unit to turn on automatically before you return
home. The air conditioner will automatically start
operating at the set time.
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting of
starting operation time and the symbol "H" will
show on the display area.
2. Press the TIMER ON button to display "6.0H "
on the TIMER ON display on the remote
control.
3. Wait for 3 seconds and the LCD display area
will show the temperature again. The
"TIMER ON" indicator remains on and this
function is activated.
TIMER ON
Example:
Set
910

11 12
Stop
On
Set 10 hours later 1. Press the TIMER OFF button, the last setting of
stopping operation time and the symbol "H" will
show on the display area.
2. Press the TIMER OFF button to display "10H " on
the TIMER OFF display on the remote control.
3. Wait for 3 seconds and the LCD display area will
show the temperature again. The "TIMER OFF"
indicator remains on and this function is activated.
TIMER OFF
(Auto-off Operation)
The TIMER OFF feature is useful when you want the
unit to turn off automatically after you go to bed. The
air conditioner will stop automatically at the preset
time.
Example:
To stop the air conditioner in 10 hours.
On
Stop
2 hours later
after setting
Set 1. Press the TIMER OFF button.
2. Press the TIMER OFF button again to display
2.0H on the TIMER OFF display.
3. Press the TIMER ON button.
4. Press the TIMER ON button again to display 10H
on the TIMER ON display .
5. Wait for 3 seconds and the digital display area will
show the temperature again. The "TIMER ON
OFF" indicator remains on and this function is
activated.
COMBINED TIMER
(Setting both ON and OFF timers simultaneously)
TIMER OFF → TIMER ON
(On → Stop → Start operation)
This feature is useful when you want to stop the air
conditioner after you go to bed, and start it again in
the morning when you wake up or when you return
home.
Example:
To stop the air conditioner 2 hours after setting and
start it again 10 hours after setting.
Start
10 hours later
after setting
Example:
TIMER ON → TIMER OFF
(Off → Start → Stop operation)
This feature is useful when you want to start
the air conditioner before you wake up and
stop it after you leave the house.
To start the air conditioner 2 hours after setting,
and stop it 5 hours after setting.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to display
2.0H on the TIMER ON display.
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to display
5.0H on the TIMER OFF display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The "TIMER
ON & TIMER OFF" indicator remains on and
this function is activated.
Off Stop
Start
2 hours later
after setting
5 hours later
after setting
Set
11 12

8m
MODE
SWING TEMP
SHORTCUT
FAN
SPEED
TIMER
OFF
RESET LOCK
LED
FOLLOW ME
TIMER
ON
TURBO
SELF CLEAN
DIRECT
SLEEP
FRESH
Use the remote controller within a distance of 8
meters from the indoor unit, pointing it towards
the receiver. Reception is confirmed by a beep.
The remote control can be attached to a wall or pillar by
using a remote controller holder.
Before installing the remote control, check the indoor
unit receives the signals properly.
Install the remote controller with two screws.
Positioning the remote control
Installing the remote control holder (optional)
The remote controller is powed by two dry
batteries (R03/LR03X2) housed in the back rear
part and protected by a cover.
(1) Remove the cover in the rear part of the
remote controller.
(2) Remove the old batteries and insert the new
batteries,placing the(+) and (-) ends correctly.
(3) Install the cover back on.
NOTE: When the batteries are removed, user's
programming are lost. After inserting new
batteries, the remote controller must be
reprogrammed.
Replacing batteries
Replace old batteries with new ones if,
•Receiving beep is not emitted when a
signal is transmitted.
•Indicator fades away.
CAUTIONS
The air conditioner will not operate if curtains, doors
or other materials block the signals from the remote
controller to the indoor unit.
Prevent any liquid from falling into the remote
controller. Do not expose the remote controller to
direct sunlight or heat.
If the infrared signal receiver on the indoor unit is
exposed to direct sunlight, the air conditioner may
not function properly.
If other electrical appliances react to the remote
controller, either move these appliances or consult
your local dealer.
Do not drop the remote controller. Please handle
with care.
Do not place heavy objects on the remote controller,
or step on it.
CAUTIONS
Do not mix old and new batteries or batteries
of different types.
Remove batteries in the remote controller if
they are not going to be used for 2 or 3
months.
Dispose off batteries responsibly.
Handling The Remote Control
13 14