tedee Euro Adapter Assembly instructions

tedee euro adapter | page 1www.tedee.com
INSTALLATION GUIDE
AND USER MANUAL
tedee euro adapter
Product should be installed only by professional locksmiths.
Read installation guide and user manual and learn how to
assemble the adapter in a safe and proper manner.
EN

page 2 | tedee euro adapter www.tedee.com
table of contents
table of contents
quick start with tedee euro adapter
disclaimers and warnings
set of items – what’s in the box?
what’s NOT in the box (but is needed)?
setup – 3 easy steps
step 1: PREPARE the door and CUT the key
step 2: PREPARE the adapter
step 3: INSTALL tedee lock
additional and technical information
technical information
technical support
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 7
Page 14
Page 20
Page 24
Page 24
Page 24

tedee euro adapter | page 3www.tedee.com
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 7
Page 14
Page 20
Page 24
Page 24
Page 24
quick start with tedee euro adapter
tedee euro adapter setup – go to page 7
3 easy steps
Tedee euro adapter can be tted to any
door equipped with a lock that works with
europrole cylinders.
It’s a part of tedee set. It’s customized for tedee
lock to make your door smart.
This booklet will give you an overview of the
basic features of tedee euro adapter and will
help you walk through the setup in 3 steps.
PREPARE
the door
and CUT the key
PREPARE
the adapter
INSTALL
tedee lock
1 2 3

page 4 | tedee euro adapter www.tedee.com
disclaimers and warnings
WARNING
tedee euro adapter is a product which can be installed only by professional locksmiths.
Tools needed can cause serious bodily harm. You will need protective gear such as gloves
and eye goggles. Before starting make sure all safety measures are met.
HAND PROTECTION
(GLOVES)
EYE PROTECTION
(GOGGLES)

tedee euro adapter | page 5www.tedee.com
set of items – what’s in the box?
tedee euro adapter
adapter - body
adapter - shaft other items
1. Mounting holes
2. Clamping screw
3. Groove and hole
4. Key socket
5. Adapter shaft
6. Mounting screws (x2)
7. Torx key
1
764
5
3
2

page 6 | tedee euro adapter www.tedee.com
what’s NOT in the box (but is needed)?
necessary to prepare
RULER GRINDER
OR HACK SAW
TEDEE LOCKTIME (60 MIN)
VICE PERMANENT
MARKER
ALLEN KEY YOUR KEY
HAND PROTECTION
(GLOVES)
EYE PROTECTION
(GOGGLES)

tedee euro adapter | page 7www.tedee.com
setup - 3 easy steps
step 1: PREPARE the door and CUT the key
1Please check, how much your cylinder sticks out from the lock escutcheon
(from the inside of your apartment).
min. 3mm
Note: If it’s less than 3mm you will have to replace your old cylinder. You can either:
• order a GERDA SLR Modular Cylinder and t it to your door as described in GERDA SLR
Modular Cylinder user manual and installation guide (and install tedee lock directly on it), or
• consult your locksmith in order to buy any other euro-prole double-clutch cylinder that
ts your door.

page 8 | tedee euro adapter www.tedee.com
setup - 3 easy steps
2Fit the euro adapter on your door cylinder (from the inside of your apartment).
place
ADAPTER
OK

tedee euro adapter | page 9www.tedee.com
setup - 3 easy steps
3Insert your key in the cylinder.
insert
KEY
OK

page 10 | tedee euro adapter www.tedee.com
setup - 3 easy steps
4Use a permanent marker to mark a line on your key.
Note: The line has to be drawn slightly below the rim of the inner adapter hole.
KEY
PERMANENT
MARKER
mark

tedee euro adapter | page 11www.tedee.com
Note: If you already have the key prepared in this way, you’re almost ready to proceed
to the next step. Before doing so, make sure you have all necessary tools: a vice and a
hacksaw or an angle grinder.
Warning: Next steps can be carried out by professional locksmiths only – remember to
protect your hands with gloves and your eyes with a protective mask or goggles.
setup - 3 easy steps
Don’t start without hand and eye protection gear!
HAND PROTECTION
(GLOVES)
EYE PROTECTION
(GOGGLES)
OK
VICE GRINDER
OR HACK SAW

page 12 | tedee euro adapter www.tedee.com
setup - 3 easy steps
5Place the key in the vice rmly.
Note: The marking line has to be visible and accessible for a hacksaw or an angle grinder –
allowing to be cut across.
KEY
KEY
VICE
place

tedee euro adapter | page 13www.tedee.com
setup - 3 easy steps
Note: Try cutting the key from top to bottom side until it falls off.
cut
KEY
GRINDER
OR HACK SAW
6Cut the key in half across the marking line using a handsaw or a grinder.
Be careful and watch out for your hands and eyes.
You can throw the key head away – it will not be needed anymore.
7
KEY KEY SHAFT

page 14 | tedee euro adapter www.tedee.com
OK
KEY
SHAFT
insert
KEYHOLE
setup - 3 easy steps
Note: Firmly push it forward to make sure it doesn’t stick out of the adapter.
step 2: PREPARE the adapter
1Insert the key shaft in the cylinder keyhole.
NOT OK

tedee euro adapter | page 15www.tedee.com
setup - 3 easy steps
detach
ADAPTER
CYLINDER
2Detach the adapter from the door, but leave the key shaft inside the cylinder.

page 16 | tedee euro adapter www.tedee.com
setup - 3 easy steps
3Insert the adapter shaft into the mounting hole of your tedee lock.
TEDEE LOCK
TEDEE LOCK
SHAFT
push forward
SHAFT
OK

tedee euro adapter | page 17www.tedee.com
setup - 3 easy steps
4Fix the adapter shaft tightly on tedee lock using the Allen key provided in tedee lock box.
TEDEE LOCK ADAPTER
SHAFT
ALLEN KEY
rotate
clockwise
Note: Keep rotating the key until it stops (at least two full turns).

page 18 | tedee euro adapter www.tedee.com
setup - 3 easy steps
5Attach the adapter to the rear side of your tedee lock.
TEDEE LOCK
ADAPTER
attach
OK
Note: Make sure that the adapter matches the rear side of your tedee lock.

tedee euro adapter | page 19www.tedee.com
OK
setup - 3 easy steps
6Mount the adapter to your tedee lock using two mounting screws. Use torx key.
MOUNTING
SCREWS
TORX
KEY
rotate
clockwise
Note: Keep rotating the key until it stops.

page 20 | tedee euro adapter www.tedee.com
setup - 3 easy steps
TEDEE LOCK
+
ADAPTER
DOOR LOCK
+
KEY
SHAFT
attach
OK
step 3: install tedee lock
1Attach the combined tedee lock and adapter with the door lock.
IMPORTANT: make sure that key shaft ts inside the key socket.