GW Instek GRA-410 User manual

Rack Adapter Panel
GRA-410
Assembly Manual
GW INSTEK PART NO. 82RA-41000MA1
This assembly manual contains proprietary information, which is protected by copyrights. All rights are
reserved. No part of this manual may be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER

GRA-410 Assembly Manual
GRA-410
The GRA-410 rack mount is suited for the PSW Multi Range DC Power Supplies.
The GRA-410 is supports both the EIA (GRA-410-E) and JIS (GRA-410-J)
standards for use with standard sized rack units. Incorporating a strong frame
and robust design, the GRA-410 can fit up to 6 Type I, 3 Type II or 2 Type III PSW
power supplies.
Rack Mount Adapter Component List and Assembly
Description
Please check to make sure all the components of the
GRA-410 rack mount kit are provided. The JIS and EIA rack
mounts have slightly different component sets.
GRA-410-E
GRA-410-E
Assembly
Item
Part NO.
Description
QTY
1
59CA-04017NS1
Rack Screw
3
2
62RA-410HP201
Front Bracket
1
3
62RA-410HP801
BLANK PANEL
1
4
62RA-410HP701
BLANK PANEL
1
5
62RA-410HP601
BLANK PANEL
1
6
5320-00403001
SR-3S PIN GOOD
4

GRA-410 Assembly Manual
3
7
62RA-410HP101
Middle Bracket
1
8
592B-W3008NS1
PMS-W-3*8
3
9
62RA-410HPA01
EIA BRACKET 3U
2
10
593B-03008NS1
FMS-3*8
8
11
593B-03005NS1
FMS-3*5
4
12
62RA-410HP501
Right Bracket
1
13
62RA-410HP401
Left Bracket
1
14
62RA-410HP301
Rear Bracket
1
15
62RA-410HP901
Rack HP
6
16
594B-W3008NS1
BMS-W-3*8
6
GRA-410-J
GRA-410-J
Assembly
Item
Part NO.
Description
QTY
1
59CA-04017NS1
Rack Screw
3
2
62RA-410HP201
Front Bracket
1
3
62RA-410HP801
BLANK PANEL
1
4
62RA-410HP701
BLANK PANEL
1
5
62RA-410HP601
BLANK PANEL
1
6
5320-00403001
SR-3S PIN GOOD
4
7
62RAW-410HP101
Middle Bracket
1
8
592B-W3008NS1
PMS-W-3*8
3
9
62RA-410HPB01
JIS BRACKET 3U
2
10
593B-03008NS1
FMS-3*8
12
11
593B-03005NS1
FMS-3*5
4
12
62RA-410HP501
Right Bracket
1
13
62RA-410HP401
Left Bracket
1
14
62RA-410HP301
Rear Bracket
1
15
62RA-410HP901
Rack HP
6
16
594B-W3008NS1
BMS-W-3*8
6
17
62RA-410HPC01
TOP Bracket
1

Assembly
4
Assembly
Initial setup
1. Remove the handle (from) the power supply units.
Remove the handle cover.
Remove the screws securing the handle to the
case.
Remove the handle.
→
2. Remove the feet from the underside of the PSW.
Instrument
insertion
1. Ensure the Middle Bracket is latched onto the catch on
the underside of the PSW.
PSW
Middle bracketcatch

GRA-410 Assembly Manual
5
2. Attach the Front Bracket to the Middle Bracket with the
rack screws.
PSW
Front Bracket
Rack
screw
3. Secure the Rack holding plates (X6) to the groove on the
Rear Bracket and to the instrument(s).
PSW
Rack holding
plate
Rear Bracket
Rack HP
Blank panel
insertion
1. Insert the required number of blank
panels into the groove of the Front
and Middle Brackets.

Specification
6
2. Secure the panels with the PMS-W-3*8 screws.
Use the SR-3S PIN GOOD pins to hold two adjacent
brackets together.
Front Bracket screws
Specification
Load Capacity
Max 20kg
Rack Weight
GRA-410-E:1.0kg
GRA-410-E: 1.2kg
Rack installation
Diagram