tekkiwear DT3+ User manual

Sport Smartwatch - DT3+
User Manual
Thank you for choosing our smart watch. You can fully understand the use and operaon of the equipment by
reading this manual. The company reserves the right to modify the contents of this manual without any prior noce.
Watch funcon descripon
Buon descripon:
Up buon: Turn on and o the screen; one key to return to the main interface; long press to
restart the watch.
Buon down: Short press to enter mul-sport mode. In addion, when the watch is in the o-
screen state, the watch can turn on the screen by pressing the buon.
Charging instrucons: Wireless charging, as shown in the gure below.
1.1 Shortcut funcon:
1) Swipe to the le to display the "+" icon, click the icon to add part of the menu as a shortcut
funcon.
2) Slide down to display, Bluetooth connecon status, me, power, brightness adjustment and
other funcons.
3) Swipe to the right to display, me/date/week, the latest message (enter to view mulple
messages)/turn on or o Bluetooth for calls and display some of the recently used menu
funcons.

4) Swipe up to enter the menu interface, and slide up and down to nd the corresponding
funcon.
5) Long press the watch face interface to slide to switch the watch face, select it and touch it to
net it successfully.
1.2 Push message
1) When the watch is bound to the APP, and the nocaon permission is turned on, the new
messages received in the nocaon bar of the mobile phone will be pushed to the watch, and
a total of 10 messages can be saved. The messages received aer 10 messages will be
overwrien one by one news.
2) Swipe to the boom to press the delete icon to clear all message records.
1.3 Drop-down menu
The dial interface slides down to open the drop-down menu interface.
1) Bluetooth connecon status; me display, power display;
2) The rst icon, about;
3) Seng; enter the seng part of the funcon;
4)Brightness adjustment; adjustable screen brightness adjustment;
5) stopwatch; Click the stopwatch to enter the ming interface, and you can record the me at
a me.
1.4 Phone/Call History
1. Enter the le swipe interface, click the call icon to turn on/o the Bluetooth phone, turn on
Bluetooth, go to "About" to turn on Bluetooth, open the phone sengs, search, Bluetooth name
+ the last four digits of the Bluetooth address, aer connecng the phone to Bluetooth
successfully, you can Use the watch to answer/hang up the Bluetooth phone.
2. Call records, which can save the records of connected and dialed calls. (It can save more than
50 call records, and it will be automacally overwrien when 128 records are full. Click any call
record to call back)
3. Dial the keyboard, you can enter the phone number to make a call.
1.5 message
The watch and the APP are successfully bound, the corresponding nocaon authority in the
mobile phone system is opened, and the mobile phone informaon can be synchronized with
the watch.
1.5.1. Incoming call nocaon:
Turn on the call reminder in the personal applicaon. When the phone receives the call reminder,
the watch will light up or vibrate.

1.5.2. SMS nocaon:
The SMS nocaon is enabled in the personal applicaon. When one or more SMS messages
are received on the mobile phone, the watch will receive one or more SMS reminders at the
same me.
1.5.3. Other applicaon message nocaons:
Turn on the corresponding applicaon message nocaon switch in personal applicaons, such
as WeChat, QQ, Outlook, Facebook and other applicaons. When the mobile terminal receives
one/mulple applicaon message nocaons, the watch terminal will receive one/mulple
corresponding message reminders at the same me noce.
1.6 Frequently used contacts
You can connect to the APP. In the device of the APP" select frequently used contacts" add
contacts (up to 20 contacts can be added), which can be synchronized to the watch, and the
watch can display up to 20 contacts.
1.7 Fitness data
The tness data is turned on by default. Enter the tness data interface and slide from boom
to top to display the current number of steps, distance, and calories of the watch. The data is
cleared at 12 o'clock in the morning every day.
1.8 Sports modes
(strike, running, cycling, skipping rope, badminton, basketball, football)
1.8.1 Select the corresponding exercise mode, click the start buon on the screen to enter the
corresponding exercise mode; click the start buon of the exercise being calculated to pause the
exercise, click the and buon to end the exercise and save the data.
1.8.2 When the exercise me is longer than 1 minute, the exercise data can be saved; when the
exercise is saved under this condion, it will prompt "Too lile data to save".
1.9 Heart rate
Put the watch on your wrist correctly, enter the heart rate menu, and you can measure the heart
rate value at a me.
1.10 ECG
Put the watch on your wrist correctly, enter the ECG menu (need to open the APP "ECG monitor"
interface), you can measure the ECG value in a single me, and the single ECG measurement can
be saved in the APP simultaneously. This funcon needs to be connected to the APP to use .
2.0 My QR code
Connect the watch to the APP, nd my QR code on the APP interface, select WeChat/QQ/ Alipay
and other "Receive money QR code" to save (the specic operaon method is based on the
instrucons of the APP).
2.1 Calculator
Simple calculaons can be performed aer entering.

2.2 Remote music
Connecng to the APP, you can control the phone's music/start/pause/previous/next song, and
the speaker sound will appear on the phone. Connect the call Bluetooth, you can control the
phonesmusic/start/pause/previous/next song, and the speaker sound appears on the watch.
2.3 Sleep
Sleep monitoring me period: from 18:00 in the evening to 10:00 the next day, the watch
generates data. Aer exing the sleep monitoring, the sleep data on the watch can be
synchronized to the APP for viewing aer connecng to the app.
2.4 Stopwatch
Click the stopwatch to enter the ming interface, and you can record the me at a me.
2.5 Weather
Aer the watch is connected to the app and the data is synchronized, click on the weather on
the watch to display the weather informaon of the day.
2.6 Find mobile phone
Aer the watch is bound to the app, click on the phone to nd the phone on the watch, and the
phone will vibrate or ring tones.
2.7 Meteorology
Click the weather on the watch side to display the ultraviolet (UV) and air pressure condions of
the day.
2.8 Breathing
There are three modes of breathing: slow, moderate, and fast, which can be selected, and the
breathing can be carried out according to the mode selected by the user.
2.9 Massager
Tap the green buon to start the massage, and the watch is in a vibrang state, tap the red
buon to end the massage state.
3.0 Menu style
There are a variety of menu styles to choose from. Aer seng, the menu style of the watch will
also be changed.
3.1 Sengs
1) When you enter, you can select the watch language, connect to the APP, and synchronize data.
The watch and the phone have the same language.
2) Switch the watch face, slide right to select the next watch face, select a watch face, and click
to set the watch face.
3) Bright screen me; a variety of bright screen me lengths can be selected.
4) Vibraon intensity; click to set reminder vibraon intensity.

5) Bluetooth phone; Bluetooth phone can be turned on/o
6) Password; a 4-digit password can be set (if you forget the password, please enter 8762, which
can be decrypted)
7) Restore factory sengs; click to enable the factory reset, and click X to cancel the factory
reset.
Bind APP
1. APP download
1.1 Scan the QR code to download the APP
1.2 For Android end user:
Search for"WearPro"in the Google Play App Store or any customized Android Store to download,
remember to check the phone pop-up box to agree to the permissions when installing;
1.3 For IOS end user:
Search for "WearPro" in the APP Store to download, remember to check the mobile phone pop-
up box to agree to the permissions when installing; Aer WearPro is installed, the applicaon
icon is shown as:
2. Connect APP through mobile phone Bluetooth
2.1 Search for Bluetooth name to connect/pair
Scroll down on the watch main interface, nd the rst icon "About (i)" and click it, and remember
the Bluetooth name of the watch; then, open the WearPro APP on the mobile phone, click on
the "Device" column, and click on "Search to bind device" to start searching , In the Bluetooth
list, nd the Bluetooth name of the your watch and pair it. If the connecon is successful, the
Bluetooth icon of the watch will light up green in the middle of the icon);
2.2 Scan QR code to connect/pair
Aer pulling down on the watch main interface, click on the rst icon displayed "About (i)",you
can see a QR code for connecon, then take out the phone to open WearPro, and in the "Device"
column, select "Scan to bind device", the pairing box will pop up aer scanning the QR code.
Click "Pair" to connect the App to the watch. Remember to check to agree to the nocaon
permissions of various Apps;
3. Connect the watch's audio/call Bluetooth channel:

Open the Bluetooth sengs of the phone, swipe right on the main interface of the watch, click
the "phone call" icon that appears below, and click "Open" to see the name of the audio/call
Bluetooth. Find the Bluetooth name in the Bluetooth list of the phone and pair; aer the
audio/call Bluetooth connected, the Bluetooth icon of the watch is displayed as the outer
periphery ) lights up in blue; Tip: Based on this connecon, make sure to tap on various APP
nocaon synchronizaon permissions in WearPro sengs, to realize synchronously viewing
of various message from mobile phone on the watch side; to realize all connecon funcons(like
making a phone call through watch), make sure that both App side and audio Bluetooth are
connected to the phone.
4. Unbind Bluetooth connecon from the APP side
4.1 Android system unbind Bluetooth from the APP
In the "Device" column of WearPro, pull down to the "Unbind" and click to unbind the App;
4.2 IOS system unbind APP Bluetooth
In the "Device" column of WearPro, scroll down to "Unbind" and click to unbind the App; then
go to the Bluetooth sengs of the phone, select the Bluetooth name of the smart watch, and
click "Ignore this device"
Aer canceling the Bluetooth connecon on the APP, the green connecon in the middle of the
Bluetooth icon of the watch is released, and the blue outside the circle is sll lit;
5. Unbind audio Bluetooth connecon
To disable the audio Bluetooth connecon, nd the name of the audio Bluetooth in the
Bluetooth sengs of the mobile phone, and click "Ignore this device" to unbind all Bluetooth
connecons with the watch. Aer all operaons are completed, the watch's Bluetooth icon will
return to gray, means no connecon .
6. Find the device
The watch is successfully bound to the app. Click to nd the watch on the mobile app, and the
watch will vibrate once when the screen is on.
7. Camera
Tap the camera to wake up the watch device's camera mode, tap the camera buon to take a
photo, and the picture will be automacally saved to the phone system album.
8. Data synchronizaon
The watch is successfully bound to the app, and the data from the watch can be synchronized to
the app.
9. Raise your hand to brighten the screen
Wear the watch correctly on your wrist (le/right hand). When you turn on the hand-up buon,
when you li your wrist to look at the watch, the watch will automacally brighten the screen.
10. Do not disturb mode

In the APP Device>More, set the start to end me, such as 12:00 to 14:00 noon for the do not
disturb mode, during this me there will be no phone calls and message sound reminders on the
watch.
11. Daily alarm clock
In the APP in the APP Device>More, set the start to end me, the alarm can be set only once or
repeatedly select the date (week) seng, and the alarm can be turned on/o
12. Sedentary reminder
Set the start to end me period and the sedentary me interval (minutes) in the APP, click to
enter the repeat seng only once or select the sedentary reminder date (week). When the
sedentary me is reached, the watch will vibrate and there will be a sedentary icon.
13. Drink water reminder
Set the start to end me period and frequency (minutes) in the APP, click to enter the repeat
seng, select the drinking reminder date (week), check the drinking reminder and save it. When
the reminder me for drinking water arrives, the watch will vibrate and there will be a drinking
water icon.
14. Dial push
14.1 Push an exisng watch face
Connect to the app, go to Device>Dial Push>Select Dial>, and make sure to replace it with this
dial. Aer the dial is synchronized, the watch will automacally restart and then automacally
connect to the app.
14.2 Customize the watch face
Connect to the APP, select Device>Dial Push>(Dials with pen icons belong to custom dials)
Custom Dial Sengs>You can choose a custom background. Aer the dial is synchronized, the
watch will automacally restart and then automacally connect to the app.
15. Firmware version
The version of the watch is displayed, and the user can choose to upgrade the rmware version.
16. QR code of Alipay payment
The watch features the payment funcon, which requires the phone to scan the code to verify
binding. Follow the steps below: Click the Alipay icon on the main interface(drop down screen)
of the watch, and complete the binding and use of personal Alipay account and smart watch
payment funcon according to the instrucons in the popup box. If you do not use the watch to
pay, you can also unbind.
•Frequently asked quesons and answers
*Please avoid exposing the device to extreme temperatures that are too cold or too hot for a
long me, which may cause permanent damage.
*Why can't I take a hot bath with my watch?

The temperature of the bath water is relavely changed, it will produce a lot of water vapor, and
the water vapor is in the gas phase, and its molecular radius is small, and it is easy to seep into
the gap of the watch case. The internal circuit of the watch is short-circuited, which damages the
circuit board of the watch and damages the watch.
*No power on, no charging.
If you receive the goods and the watch does not turn on, it may be caused by a collision during
the transportaon of the watch and the baery Seiko board has been protected, so plug in the
charging cable to acvate it. If the baery is too low or the watch does not turn on aer a long
period of me, please plug in the data cable and charge it for more than half an hour to acvate.