tekkiwear DT3 User manual

SmartWatch DT3
User Manual
Understanding the watch
Note: If long press power buon does not start the watch, please charge the watch before trying
again to start it
1. Heart rate sensor
2. ON / OFF key
3. Mul-sports mode shorcuts key
Install the APP
1. Conrm startup is normal
2. Use your mobile phone to scan the QR code below, download and install the APP. (Please
aach the QR code downloaded by the APP)

Points to Note:
1. In order to achieve a beer user experience, please prompt to upgrade the APP to the latest
version in me.
2. The system requirement is Android 5.0 or IOS 10.0 or above
Connecon
1. Open the APP on your phone, register or log in to your account.
2. Select the device you want to connect from the device list, and pair to connect according to
the APP prompt.
3. Aer connected, check if the me display correct, and set up relevant funcons according to
your needs.
Note: Do not pair directly via Bluetooth in the phone sengs.
Watch charging
This product is magnec aach charging, please use the standard charging base for charging.
Align and t the charging port to the metal contacts of the charging base unl the charging
power indicator appears on the watch screen.
Note：
1. Please use the charging base that comes with the package to charge.
2. Please dry the charging port before charging.
3. Connect the USB interface to a mobile phone charger with an
4. Output current of more than 1A or a computer USB interface for charging
Dissasembling & assembling the watch strap
1. Adjust the length of the strap according to your wrist’s size.
2. If you need to disassemble the strap, please refer to the picture below.

Note:
1. Aer installing the strap, please pull the strap properly to ensure that the strap is installed
successfully.
2 The leather strap is not waterproof, avoid contact with liquid; when wearing it in water contact
scenes such as swimming, please replace it with a metal strap or a silicone strap
Wearing
1. Do not wear the watch too ghtly or too loosely. Make sure the skin have space for
venlaon. This will not only make you feel comfortable, but also make the sensor work.
2. In the process of measuring blood oxygen saturaon, please wear the watch correctly, do
not wear it on the condyle of the wrist, place your arm at, keep the watch and the wrist skin
comfortable (wear it ghtly), and keep your arm sll during the whole measurement. . Aected
by external factors (sagging arms, shaking arms, excessive arm hair, taoos, etc.), the
measurement results may be inaccurate, or the measurement values may not appear.
3. You can ghten the watch strap during exercise and loosen it appropriately aer exercise. If
your watch will shake on your wrist, or the sensor cannot read the data, try ghtening the strap
a lile bit.
Basic Parameters
Product Name: DT3 Smart Watch
Working environment temperature: 0℃-45℃
Equipment requirements: Android 5.0 or iOS 10.0 and above.
Wireless connecon: BT5.0, BLE
CMIIT ID: 2020DP1862
Input: 5v --50OmA MAX