Tektronix 001-1383-00 User manual

Probe Arm Adapter
Instructions
001-1383-00
Kit Contents
HInstruction sheet
HProbe Arm Adapter
Tools Required
HHexagonal wrench (provided with the
PPM203B product) to remove the screw from
the end of the PPM203B arm.
Overview
Use these instructions to attach the Probe Arm
Adapter to the end of the PPM203B Articulating
Arm or the PPM100 Positioner. The Probe Arm
Adapter is designed to be used with the P7380
8 GHz 5X/25X Differential Probe.
CAUTION. To prevent damage to the probe
arm adapter, do not overtighten the captive
thumbscrews on the Probe Arm Adapter.
Procedure
To install the probe arm adapter, follow the steps
in the appropriate illustrations.
*P001138300*
001138300
Secure the adapter top by
tightening the two thumb screws.
Using the Hex wrench, attach the
adapter bottom to the probe arm.
Using the Hex wrench, remove
the screw from the end of the
articulated arm.
Loosen the adapter top by
turning the two thumbscrews
counter clockwise.
Adapter to probe
arm connection
Probe
arm
Probe arm
adapter
orientation
1
2
4
5
3
Place the probe with the
handheld adapter in the loosened
adapter bottom (keyed).
Probe attached to the
probe arm adapter without
the handheld adapter.
PPM203B Articulating Arm
Probe arm
Probe arm
adapter
orientation
Insert the probe adapter shaft
through the probe arm.
PPM100 Probe Arm
Alternate method. Use the
probe holder provide with the
PPM100 Probe Arm.
Probe
holder
1Follow steps 3, 4 and 5 as shown
for the PPM203B Ariculating Arm.
Tighten the probe arm knob.
3
Preferred method for attachment
(without the probe holder)
2

Copyright ©Tektronix, Inc.
Beaverton, OR 97077
Table 1: Replaceable parts list
ASSEMBLY,ADAPT
ER;PROBE TO
PROBE ARM
Order Tektronix part number
013--0339--XX
Contacting Tektronix
Phone [phone]*
Address Tektronix, Inc.
Department or name (if known)
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
Web site www.tektronix.com
Sales
support
1-800-833-9200, select option 1*
Service
support
1-800-833-9200, select option 2*
Technical
support
www.tektronix.com/support
1-800-833-9200, select option 3*
6:00 a.m. -- 5:00 p.m. Pacific
Standard Time
*This phone number is toll free in North
America. After office hours, please leave a
voice mail message.
Outside North America, contact a Tektronix
sales office or distributor; see the Tektronix
web site for a list of offices.
WARRANTY SUMMARY
Tektronix warrants that the products that it
manufactures and sells will be free from defects in
materials and workmanship for a period of three
(3) months from the date of shipment from an
authorized Tektronix distributor. If a product
proves defective within the respective period,
Tektronix will provide repair or replacement as
described in the complete warranty statement.
To arrange for service or obtain a copy of the
complete warranty statement, please contact your
nearest Tektronix sales and service office.
EXCEPT AS PROVIDED IN THIS SUMMARY
OR THE APPLICABLE WARRANTY
STATEMENT, TEKTRONIX MAKES NO
WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. IN NO EVENT
SHALL TEKTRONIX BE LIABLE FOR
INDIRECT, SPECIAL OR CONSEQUENTIAL
DAMAGES.