Tektronix PQA600C Quick start guide

PQA6CUP Upgrades
PQA600C Picture Quality Analyzer
ZZZ
Instructions
xx
www.tektronix.com
*P075108900*
075-1089-00

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your area.

Table of Contents
Kit description ...................................................................................................... 1
Supported products ............................................................................................ 1
Kit parts list..................................................................................................... 1
Installation instructions ............................................................................................ 2
PQA6CUP Upgrade Instructions i

Table of Contents
ii PQA6CUP Upgrade Instructions

Kit description
This kit describes the installation of the following software options in a PQA600C
Picture Quality Analyzer.
Option ADV: Advanced measurement package (script execution,
user-configurable measurement, artifact/attention weighting measurement)
Option BAS: Base measurement package
Option IP: IP generation and capture
Supported products
PQA600C. All serial numbers.
Kit parts list
Quantity Part number Description
1 ea 075-1089-xx MANUAL, TECH INSTALLATION, PQA6CUP OPTIONS
BAS, ADV, AND IP (this document)
1ea —IMPORTANT DOCUMENTS ENVELOPE CONTAINING
SOFTWARE OPTION KEY
PQA6CUP Upgrade Instructions 1

Installation instructions
Installation instructions
Install Options BAS, ADV, and IP in a PQA600C as follows:
1. Find the software option key included in the important papers envelope that
originally shipped with these instructions. If you ordered Option ADV, the
Requested Options will be listed as MI, SE, FM, UM, and BS.
2. Double-click the PQA icon on the PQA600C or PC desktop to start the PQA
software.
3. Click Help >License Manager in the menu bar and the License Manager
screen will appear.
4. Type in the new option key in the New Option Key field.
5. Click Apply.
6. Check that the following descriptions related to the options(s) you installed
appear in the list under Available Options.
Option Description
BAS Basic Software
Load Full Template Measurements
Loading Custom/User Measurements
Multiple Instance Execution
ADV
Script Execution
IP IP Generation/Capture
7. Click Close.
8. Click OK when a screen appears telling you that the application will close.
9. The new options in the PQA software are now ready to use. When you are
ready,double-clickthePQAicononthe desktop to start the application.
2PQA6CUP Upgrade Instructions