Tellur TLL151301 User manual

Fast wireless
car charger & motorized mount
TLL151301- User manual

Thank you for choosing us!
Please read this user manual carefully before using the
product.
Product specifications:
Input current: 9V / 1.67A, 5V / 2A
Input port: USB Type-C
Cable length: 1m
Output power: Adaptive, 5W / 7.5W /10W (max 1.2A)
Output current: 9V / 1.2A, 5V / 1.5A
Protections: FOD( Foreign Object Detection), Over Voltage,
Over Current, Over Temperature (80)
Material: ABS
Mounting: Air vent, Dashboard, Windshield
Available colors: Black
Product compatibilities: Fast charging supported by:
iPhone 8/8 Plus/X/XS/XS Max/XR
Samsung S9/S9+/S8/S8+/S7/S7 edge/Note8/Note9/Note5
Standard wireless charging for all Qi enabled devices
Note: Min. QC2.0 fast charger adapter required for fast
wireless charging (not included)
Package includes: 1 x Wireless car charger & automatic
mount
1 x 1m Type-C Cable
1 x Air Vent Mount
1 x Suction holder
Product dimensions: 126 x 70 x 21mm
Product weight: 100gr
Compatible devices:
All mobile phones without Qi standard will require an
additional receiver (not included)

Product overview
Wireless Charger PCBA
Coil
Clip
Fixed nut
Button
Infrared sensor PCBA
Infrared sensor lens
Motor
Soft rubber
Touch key

Installation steps
1
2
3
4
Follow the arrows to install 4 parts Adjust the screw cap to the
best active status
1. Air vent installation
2.Connect the wireless charger to the car adapter
using the cable included
Min. QC2.0 fast charger adapter required for fast
wireless charging (not included)

Infrared sensor
4. Place smartphone
The clamps will automatically
open and secure lock your phone.
3. Press the button of the clip to fix it in the air
vent, adjust the angle and tighten the fixed nut.

5. Take off smartphone
Touch key
Touch the on/off button on the
left side, the clips will
automatically open and you can
take your phone out.
Notes
1. Do not disassemble or throw into fire or water, to avoid
causing a short circuit.
2. Do not use wireless charger in severely hot, humid or
corrosive environments.
3. Do not place too close to objects with magnetic stripe or
chip (ID card, bank cards etc.) to avoid demagnetization.
4. Please keep a distance at least of 20 cm between
implantable medical devices (pacemakers, implantable
devices etc.) and the wireless charger, to avoid potential
interference.
5. This product is not a toy, please keep it away from
children to avoid unnecessary accidents.

The images from this manual are sketch maps, used for
illustrating the instructions. The packet includes: wireless
charger, power cable, user’s manual.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product,
battery, literature or packaging reminds you that all
electronic products and batteries must be taken to
separate waste collection points at the end of their working
lives; they must not be disposed of in the normal waste
stream with household garbage. It is the responsibility of
the user to dispose of the equipment using a designated
collection point or service for separate recycling of waste
electrical and electronic equipment (WEEE) and batteries
according to local laws. Proper collection and recycling of
your equipment helps ensure EEE waste is recycled in a
manner that conserves valuable materials and protects
human health and the environment, improper handling,
accidental breakage, damage, and/or improper recycling at
the end of its life may be harmful for health and
environment.