Teltonika FMB202 Installation guide

FMB202
Advanced waterproof tracker
Quick Manual v1.5

Quick Manual v1.5 // FMB202 2
CONTENT
Know your device................................................................................................................................................................................................3
Pinout ...................................................................................................................................................................................................................4
Wiring scheme.....................................................................................................................................................................................................5
Set up your device ..............................................................................................................................................................................................6
PC Connection (Windows)..................................................................................................................................................................................7
How to install USB drivers (Windows) ..............................................................................................................................................................7
Conguration.......................................................................................................................................................................................................8
Quick SMS conguration................................................................................................................................................................................. 10
Mounting recommendations.......................................................................................................................................................................... 12
LED indications................................................................................................................................................................................................. 13
Basic characteristics ........................................................................................................................................................................................ 13
Electrical characteristics.................................................................................................................................................................................. 16
Safety information .......................................................................................................................................................................................... 17
Certication and Approvals ............................................................................................................................................................................ 18
Warranty ........................................................................................................................................................................................................... 20
Warranty disclaimer ........................................................................................................................................................................................ 20

Quick Manual v1.5 // FMB202 3
KNOW YOUR DEVICE
POWER
CABLE
NAVIGATE
LED
STATUS
LED
BATTERY
SOCKET
MICRO-USB
MICRO-SIM
SLOT
TOP VIEW TOP VIEW (WITHOUT COVER)

Quick Manual v1.5 // FMB202 4
PIN NAME DESCRIPTION
VCC (6-30)V Power supply (6-30) V DC (+).
GND (-) Ground pin. (6-30) V DC (-)
DIN 1 Digital input, channel 1.
DIN 2 Digital input, channel 2.
DIN 3 Digital input, channel 3.
AIN 1 Analog input, channel 1. Input
range: 0-30 V DC.
DOUT 1 Digital output, channel 1. Open
collector output. Max. 3,3 A DC..
DOUT 2 Digital output, channel 2. Open
collector output. Max. 3,3 A DC.
1WIRE DATA Data for 1–Wire devices.
1WIRE POWER +3,8 V output for 1–Wire devices.
PINOUT
+6...30 V DC
GND
DIN3
AIN1
DIN1
1WIRE DATA
1WIRE POWER
DOUT2
DIN2
GND
+6...30 V DC
DOUT1
FMB202 wires

Quick Manual v1.5 // FMB202 5
WIRING SCHEME
BUZZER
IGNITION
DETECTION
FUEL GAUGE
STARTER
IBUTTON
POWER SUPPLY
6 - 30V DC
ANALOG
LLS SENSOR
MULTIPLE
TEMPERATURE
SENSORS
ALARM BUTTON
30
8586
87a
87
LED LIGHTS
RELAY
DOUT2
1WIRE POWER
1WIRE DATA
GND
DOUT1
DIN3
DIN1
AIN1
+6...30 V DC
DIN2

Quick Manual v1.5 // FMB202 6
SET UP YOUR DEVICE
HOW TO INSERT MICRO-SIM CARD
1UNSCREW SCREW 3MICRO-SIM CARD INSERT 2COVER REMOVAL
Unscrew 6 screws counterclockwise that
are located on the bottom of the device.
4PLACING BATTERY 6DEVICE IS READY 5ATTACHING COVER BACK
Remove the cover Insert Micro-SIM card as shown with
PIN request disabled or read our
Wiki1how to enter it later in Teltonika
Congurator2. Make sure that Micro-SIM
card cut-o corner is pointing forward
to slot.
1 wiki.teltonika.lt/index.php?title=FMB202_
Security_info
2 wiki.teltonika.lt/view/Teltonika_Congurator
Connect battery as shown to device. After conguration, see “PC Connection
(Windows)1”, attach device cover back
and screw in all screws.
1 Page 7
Device is ready to be mounted.

Quick Manual v1.5 // FMB202 7
PC CONNECTION (WINDOWS)
HOW TO INSTALL USB DRIVERS (WINDOWS)
1. Please download COM port drivers from here1.
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button.
5. Setup will continue installing the driver and eventually the conrmation window will appear. Click Finish to complete the
setup.
1 teltonika.lt/downloads/en/FMB202/TeltonikaCOMDriver.zip
1. Power-up FMB202 with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED
indications1”.
2. Connect device to computer using Micro-USB cable or Bluetooth connection:
• Using Micro-USB cable
• You will need to install USB drivers, see “How to install USB drivers (Windows)2”
• Using Bluetooth
• FMB202 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device >
Bluetooth. Choose your device named – “FMB202_last_7_imei_digits”, without LE in the end. Enter default password 5555,
press Connect and then select Done.
3. You are now ready to use the device on your computer.
1 wiki.teltonika-gps.com/view/FMB202_LED_status
2 Page 6, "How to install USB drivers"

Quick Manual v1.5 // FMB202 8
MS .NET REQUIREMENTS
Operating system MS .NET Framework version Version Links
Windows Vista
Windows 7
Windows 8.1
Windows 10
MS .NET Framework 4.6.2 32 and 64 bit www.microsoft.com1
1 dotnet.microsoft.com/en-us/download/dotnet-framework/net462
At rst FMB202 device will have default factory settings set. These settings should be changed according to the users needs. Main
conguration can be performed via Teltonika Congurator1software. Get the latest Congurator version from here2. Congurator
operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
1 wiki.teltonika-gps.com/view/Teltonika_Congurator
2 wiki.teltonika-gps.com/view/Teltonika_Congurator_versions
CONFIGURATION

Quick Manual v1.5 // FMB202 9
Downloaded Congurator will be in compressed archive.
Extract it and launch Congurator.exe. After launch software
language can be changed by clicking 🌐in the right bottom
corner.
Conguration process begins by pressing on connected device.
FMB202
Various Status window1 tabs display information about GNSS2,
GSM3, I/O4, Maintenance5and etc. FMB202 has one user
editable prole, which can be loaded and saved to the device.
After any modication of conguration the changes need to
be saved to device using Save to device button. Main buttons
oer following functionality:
 Load from device – loads conguration from device.
 Save to device – saves conguration to device.
 Load from le – loads conguration from le.
 Save to le – saves conguration to le.
 Update rmware – updates rmware on device.
 Read records – reads records from the device.
 Reboot device – restarts device.
 Reset conguration – sets device conguration to
default.
Most important congurator section is GPRS – where all
your server and GPRS settings6 can be congured and Data
Acquisition7– where data acquiring parameters can be
congured. More details about FMB202 conguration using
Congurator can be found in our Wiki8.
After connection to Congurator Status window will be
displayed.
FMB202
1 wiki.teltonika-gps.com/view/FMB202_Status_info
2 wiki.teltonika-gps.com/view/FMB202_Status_info#GNSS_Info
3 wiki.teltonika-gps.com/view/FMB202_Status_info#GSM_Info
4 wiki.teltonika-gps.com/view/FMB202_Status_info#I.2FO_Info
5 wiki.teltonika-gps.com/view/FMB202_Status_info#Maintenance
6 wiki.teltonika-gps.com/index.php?title=FMB202_GPRS_settings
7 wiki.teltonika-gps.com/index.php?title=FMB202_Data_acquisition_
settings
8 wiki.teltonika-gps.com/index.php?title=FMB202_Conguration

Quick Manual v1.5 // FMB202 10
QUICK SMS CONFIGURATION
Default conguration has optimal parameters present to ensure best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
Note: Before SMS text, two space symbols should be inserted.
GPRS SETTINGS:
 2001 – APN
 2002 – APN username (if there are no APN username,
empty eld should be left)
 2003 – APN password (if there are no APN password,
empty eld should be left)
SERVER SETTINGS:
 2004 – Domain
 2005 – Port
 2006 – Data sending protocol (0 – TCP, 1 – UDP)
« setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0»
1 2 3 4 5 6
1
2
3
4
5
6