Teltonika FMP100 Installation guide

FMP100
Plug and Play tracker
Quick Manual v1.6

Quick Manual v1.6 // FMP100 2
CONTENT
Know your device................................................................................................................................................................................................3
Set up your device ..............................................................................................................................................................................................4
PC Connection (Windows)..................................................................................................................................................................................5
How to install USB drivers (Windows) ..............................................................................................................................................................5
Conguration.......................................................................................................................................................................................................6
Quick SMS conguration....................................................................................................................................................................................8
Keyboard........................................................................................................................................................................................................... 10
Basic characteristics ........................................................................................................................................................................................ 10
User Interface................................................................................................................................................................................................... 10
Safety information .......................................................................................................................................................................................... 13
Certication and Approvals ............................................................................................................................................................................ 14
Warranty ........................................................................................................................................................................................................... 16
Warranty disclaimer ........................................................................................................................................................................................ 16

Quick Manual v1.6 // FMP100 3
KNOW YOUR DEVICE
USB CHARGING
PORT
NANO-SIM
HOLDER
CIGARETTE LIGHTER
PLUG
CONFIGURATION
SOCKET
RGB
LED
RGB
LED
RGB
LED
RGB
LED
SIDE VIEW (WITHOUT COVER) FRONT VIEW (WITHOUT COVER)

Quick Manual v1.6 // FMP100 4
SET UP YOUR DEVICE
HOW TO INSERT MICRO-NANO-SIM CARD AND CONNECT THE BATTERY
1
4
NANO-SIM TRAY INSERT
ATTACHING COVER BACK
3
6
BATTERY CONNECTION
DEVICE IS READY
2
5
DEVICE COVER SPLIT
NANO-SIM CARD INSERT
Insert the NANO-SIM tray removal tool
into the hole on the NANO-SIM card tray
and then push until the tray pops out.
Gently close device cover back.
Split device cover to access battery
connector inside.
Insert NANO-SIM card as shown with
PIN request disabled or read Security
info1how to enter it later in Teltonika
Congurator2. Make sure that NANO-
SIM card cut-o corner is pointing
forward to slot. NANO-SIM slot 1 is closer
to PCB, NANO-SIM slot 2 is the upper
one.
1 wiki.teltonika.lt/view/FMC650_Security_info
2 wiki.teltonika.lt/view/Teltonika_Congurator
Connect the battery as shown to device.
Screw in all screws. Device is ready to be
mounted.

Quick Manual v1.6 // FMP100 5
PC CONNECTION (WINDOWS)
HOW TO INSTALL USB DRIVERS (WINDOWS)
1. Please download COM port drivers from here1.
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button.
5. Setup will continue installing the driver and eventually the conrmation window will appear. Click Finish to complete the
setup.
1 teltonika.lt/downloads/en/FMP100/TeltonikaCOMDriver.zip
1. Power-up FMP100 with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED
indications1”.
2. Connect device to computer using Micro-USB cable or Bluetooth connection:
• Using Micro-USB cable
• You will need to install USB drivers, see “How to install USB drivers (Windows)2”
• Using Bluetooth
• FMP100 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device >
Bluetooth. Choose your device named – “FMP100_last_7_imei_digits”, without LE in the end. Enter default password 5555,
press Connect and then select Done.
3. You are now ready to use the device on your computer.
1 wiki.teltonika-gps.com/view/FMP100_LED_status
2 Page 6, "How to install USB drivers"

Quick Manual v1.6 // FMP100 6
MS .NET REQUIREMENTS
Operating system MS .NET Framework version Version Links
Windows Vista
Windows 7
Windows 8.1
Windows 10
MS .NET Framework 4.6.2 32 and 64 bit www.microsoft.com1
1 dotnet.microsoft.com/en-us/download/dotnet-framework/net462
At rst FMP100 device will have default factory settings set. These settings should be changed according to the users needs. Main
conguration can be performed via Teltonika Congurator1software. Get the latest Congurator version from here2. Congurator
operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
1 wiki.teltonika-gps.com/view/Teltonika_Congurator
2 wiki.teltonika-gps.com/view/Teltonika_Congurator_versions
CONFIGURATION

Quick Manual v1.6 // FMP100 7
Downloaded Congurator will be in compressed archive.
Extract it and launch Congurator.exe. After launch software
language can be changed by clicking 🌐 in the right bottom
corner.
Conguration process begins by pressing on connected device.
FMP100
Various Status window1 tabs display information about GNSS2,
GSM3, I/O4, Maintenance5 and etc. FMP100 has one user
editable prole, which can be loaded and saved to the device.
After any modication of conguration the changes need to
be saved to device using Save to device button. Main buttons
oer following functionality:
 Load from device – loads conguration from device.
 Save to device – saves conguration to device.
 Load from le – loads conguration from le.
 Save to le – saves conguration to le.
 Update rmware – updates rmware on device.
 Read records – reads records from the device.
 Reboot device – restarts device.
 Reset conguration – sets device conguration to
default.
Most important congurator section is GPRS – where all
your server and GPRS settings6 can be congured and Data
Acquisition7 – where data acquiring parameters can be
congured. More details about FMP100 conguration using
Congurator can be found in our Wiki8.
After connection to Congurator Status window will be
displayed.
FMP100
1 wiki.teltonika-gps.com/view/FMP100_Status_info
2 wiki.teltonika-gps.com/view/FMP100_Status_info#GNSS_Info
3 wiki.teltonika-gps.com/view/FMP100_Status_info#GSM_Info
4 wiki.teltonika-gps.com/view/FMP100_Status_info#I.2FO_Info
5 wiki.teltonika-gps.com/view/FMP100_Status_info#Maintenance
6 wiki.teltonika-gps.com/index.php?title=FMP100_GPRS_settings
7 wiki.teltonika-gps.com/index.php?title=FMP100_Data_acquisition_
settings
8 wiki.teltonika-gps.com/index.php?title=FMP100_Conguration

Quick Manual v1.6 // FMP100 8
QUICK SMS CONFIGURATION
Default conguration has optimal parameters present to ensure best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
Note: Before SMS text, two space symbols should be inserted.
GPRS SETTINGS:
 2001 – APN
 2002 – APN username (if there are no APN username,
empty eld should be left)
 2003 – APN password (if there are no APN password,
empty eld should be left)
SERVER SETTINGS:
 2004 – Domain
 2005 – Port
 2006 – Data sending protocol (0 – TCP, 1 – UDP)
« setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0»
1 2 3 4 5 6
1
2
3
4
5
6

Quick Manual v1.6 // FMP100 9
DEFAULT CONFIGURATION SETTINGS
MOVEMENT AND IGNITION DETECTION: DEVICE MAKES A RECORD ON MOVING
IF ONE OF THESE EVENTS HAPPEN:
SPEED DIFFERENCE
between last coordinate
and current position is
greater than 10 km/h
VEHICLE DRIVES
100 meters
VEHICLE TURNS
10 degrees
PASSES
300 seconds
After successful SMS conguration, FMP100 device will synchronize time and update records to congured server. Time intervals
and default I/O elements can be changed by using Teltonika Congurator1or SMS parameters2.
1 wiki.teltonika-gps.com/view/Teltonika_Congurator
2 wiki.teltonika-gps.com/view/Template:FMB_Device_Family_Parameter_list
VEHICLE MOVEMENT
will be detected by
accelerometer
DEVICE MAKES A
RECORD ON STOP IF:
1 HOUR PASSES
while vehicle is
stationary and
ignition is o
IGNITION
will be detected by
vehicle power voltage
between 13,2 – 30 V
RECORDS SENDING TO
SERVER:
EVERY 120 SECOND
it is sent to the server
If device has made a
record

Quick Manual v1.6 // FMP100 10
SCENARIO INDICATION MEANING
GSM error
Red LED 500 ms
blink 3 times +
Buzzer
SIM is not inserted,
device can’t connect
to the operator or
GSM signal is being
jammed
No GNSS x Red LED 1000 ms
blink 1 time
Device doesn’t have
valid GNSS x and
is searching for
coordinates
GNSS x Green LED 1000
ms blink 1 time
Device has valid
GNSS x
Key pressed 1000 ms interval
Buzzer while active
Key is pressed and
held
Private Trip
Green LED 500
ms blink 3 times +
Buzzer
Battery is almost
fully discharged
Business Trip
Blue LED 500 ms
blink 3 times +
Buzzer
Indication used to
remind the user
that device is still
operational
BEHAVIOUR MEANING
1 Click Check Trip Mode
2 Clicks Change Trip Mode
Long Click Alarm
USER INTERFACE KEYBOARD
USER INTERFACE LED INDICATION SCENARIOS KEYBOARD DEFAULT ACTIONS
BASIC CHARACTERISTICS
MODULE
Name Teltonika TM2500
Technology GSM/GPRS/GNSS/BLUETOOTH
GNSS
GNSS GPS, GLONASS, GALILEO, BEIDOU,
SBAS, QZSS, DGPS, AGPS
Receiver 33 channel
Tracking sensitivity -165 dBM
Position accuracy < 2.5 CEP
Note! This table contains only the default scenarios. Additional
scenarios/default ones can be modied using Teltonika
Congurator. User is able to select dierent indication color
(Red, Green or Blue), frequency of LED blinking and buzzer
status.