Tern Bicycles GSD Cargo Hold User manual

Specifications
• Extra large 68 L (4150 ci) carrying capacity
• 30 kg (66 lb) max load per pair
Left and Right Side Pannier Bags
The Cargo Hold Panniers should be mounted on the GSD so that the reflective GSD logo faces the rear of the bike.
How to Secure Heavier Loads
Load Panniers and Insert Hook into Loop
1
ternbicycles.com
GSD Cargo Hold™Panniers
Attach and fasten the Panniers
Tighten Inner Strap
Check Clearance from the Ground to the Bottom of the Bag
Tilt the GSD from side to side and determine how far the GSD can be leaned over before the bottom of the pannier touches the ground.
Be cautious of and do not exceed this angle when making turns. Tightening the Inner Strap can increase ground clearance.
Inner Straps: TightenedInner Straps: Loose

LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with an ONE (1) YEAR Limited Warranty from the date of retail purchase by the
original end-user. If a material or workmanship defect arises and a valid claim is received within the Warranty Period, this Product will be replaced.
Mobility Holdings cannot be held liable for damages to personal property due to misuse or improper care and maintenance. This Product Warranty
does not, under any circumstance, cover the replacement or cost of any third party product used with or connected to the Product.
Tern, the Tern Werd (logotype), the Tern Berd (device), GSD and Tern Cargo Hold Panniers, used alone or in combination are trade names, trade
devices or registered trademarks of Mobility Holdings, Ltd.
© 2017 Mobility Holdings, Ltd.
ternbicycles.com
How to Use the Pannier with the Cover Open
Roll the Cover and tuck behind the pannier.
Do not leave any straps loose or dangling. Secure all straps before riding.
Using with Child Seats
The Thule Yepp Maxi Child Seat is approved for use with the GSD.
Please follow additional mounting recommendations in the GSD Supplemental Manual
and instructions that come with your Child Seat.
Using in Vertical Position
In the vertical position, the Panniers will come into contact with the ground. Scratching and damage can occur to the panniers if the GSD
is rolled in this position. Take care to keep the GSD stationary while in the vertical position.