Terra MHI512R User manual

connect to network
icon
Quickstart Guide MHI512R
• Aer the 1st login, select the country and the language of WEB control interface.
• If you want to control your Set-Top box:
o insert IR blaster aachment to streamer IR socket and direct its head to STB front panel
o read user manual secons 5.3 and 5.4 how to congure virtual remote controller, add
presets and control STB

• If you connect the streamer to network router - IP address of WEB conguraon interface
will be assigned by your network router DHCP server. Use the following mDNS address to
access the device interface:
hp://iptv.local
NOTE: mDNS protocol is supported in Windows and macOS operang systems only.
• If you connect the streamer to personal computer IP address of WEB conguraon interface
will be set to:
hp://192.168.1.10
If you cannot connect, please read troubleshoong guide and user manual.
Enter default username and password admin/admin in the login window.

++
-
Connect to
Set-Top box
Connect to network
(home router or PC)
Connect power
supply
YY
• The “Playlist” secon of the menu displays the playlist URL for third-party players that
support M3U playlist format. Copy this URL and paste to your video player.
Third-party TV players tested:
o PLEX
o Emby
o SS IPTV
o Smart UP TV
o OTT Player
o Smart IPTV
• “Terra TV“ Android app can also be used on Android based TV or phone to watch video.
Get it from google play at:
• Any Smart TV supports DLNA. Just press the “Source” buon on the TV remote control and
select MHI512R device from the list. Choose a “HDMI video / Channel” entry from the list
and enjoy!
NOTE: TVs from dierent manufacturers may have a dierent DLNA name. For example, LG
calls it “SmartShare”.


Aer connecng the power supply, wait unl the green or red status indicaon LED lights up on the front streamer panel.

Draugystes str. 22, LT-51256 Kaunas, Lithuania, tel.: +370 37 - 31 34 44, fax: +370 37 - 31 35 55
E-mail: [email protected], http://www.terraelectronics.com

Manual in .pdf

Full user guide can be downloaded from:

• USB opon
o Connect USB memory or SSD/HDD to the device. In case of the HDD, an external power
supply may be required;
o In the “Recordings / Storage“ menu, select “Storage type“ as the “USB“. The NTFS le
system is recommended, but FAT32 is also supported.
• Network disk (NAS) opon
o In the “Recordings / Storage“ menu, select “Storage type“ as the “Network drive“.
o Enter IP and path at “Network drive address“. Add username and password of the disk
or leave it empty if authencaon is not used.
o Go to “Recordings / Schedule” and create a recording schedule. Don’t forget to check if
the system me is set correctly in the “System menu / Date, me” submenu.
