TerraKing TK95043 User manual

OPERATOR’S MANUAL
Universal Grass Groomer
TK95043
1/31/2018
Please read and save these instructions.
For your safety, please read all safety and
operating instructions prior to using equipment.
GREY
PMS 427
CMYK C19 M15 Y16 K0
RGB R204 G204 B204
Hex #CCCCCC
Threa Light Ash
BLUE
PMS 647
CMYK C91 M60 Y4 K0
RGB R20 G103 B172
Hex #1268AC
Thread Farm Blue
ORANGE
PMS 715
CMYK C0 M69 Y98 K0
RGB R243 G113 B33
Hex #F37121
Thread Tennessee Orange
BLACK
PMS TBD
CMYK C0 M0 Y0 K100
RGB R0 G0 B0
Hex #000000
Thread Black
GREY
PMS 428
CMYK C27 M17 Y17 K0
RGB R195 G197 B200
Hex #c3c5c8
Thread Light Gray
BLUE
PMS 287
CMYK C100 M87 Y20 K10
RGB R32 G61 B124
Hex #203d7c
Thread Dark Royal
GOLD
PMS 3965
CMYK C1 M14 Y99 K0
RGB R254 G212 B2
Hex #231f20
Thread NFL Yellow

2
Introduction
Table of Contents
Introduction .................................................................... 2
Product Compatibility .................................................... 2
Safety ............................................................................. 3
Kit Includes ................................................................... 3
Assembly ....................................................................... 4
Operation ....................................................................... 5
Warranty......................................................................... 6
Using Your Operator’s Manual
Read this entire Operator’s Manual, especially the safety
information, before operating.
This manual is an important part of your Universal Grass
Groomer. Keep this manual in a convenient location so
that it can be accessed easily.
Use the safety and operating information in the
attachment operator’s manual, along with the machine
operator’s manual, to operate and service the attachment
safely and correctly.
If you have any questions or concerns with the assembly,
installation, or operation of this attachment, contact
TerraKing at 717-286-1444 or [e-mail].
Warranty information regarding this attachment can be
found in the Warranty section of this manual.
A
B
Product Compatibility
The Universal Grass Groomer is compatible with lawn
and garden tractors that have the following rear hitch
dimensions:
• Distance ‘A’, from the rear face to the center of the
hitch hole, must be between 2" and 3-1/2"
• Distance ‘B’, height of the hitch off the ground, must
be between 6" and 11"
Original Instructions. All information, illustrations and
specifications in this manual are based on the latest
information available at the time of publication.
The right is reserved to make changes at any time
without notice.

3
Safety
Be Prepared
• Read the general safety operating precautions in
your tractor’s operator’s manual for additional safety
information.
• Be thoroughly familiar with the controls and the proper
use of the equipment.
• Make any necessary adjustments before you operate
Never attempt to make any adjustments while the
engine is running.
Towing Loads Safety
• Stopping distance increases with speed and weight
of towed load. Travel slowly and allow extra time and
distance to stop.
• Total towed weight must not exceed limits specified in
towing vehicle operator’s manual.
• Excessive towed load can cause loss of traction and
loss of control on slopes. Reduce towed weight when
operating on slopes.
• Never allow children or others in or on towed
equipment.
• Use only approved hitches. Tow only with a machine
that has a hitch designed for towing. Do not attach
towed equipment except at the approved hitch point.
• Follow the manufacturer’s recommendations for
weight limits for towed equipment and towing on
slopes. Use counterweights or wheel weights as
described in the machine operator’s manual.
• Do not turn sharply. Use additional caution when
turning or operating under adverse surface conditions.
Use care when reversing.
Keep Riders Off Universal Grass Groomer
• Riders on a towed attachment are subject to injury,
such as being struck by objects and being thrown off
the attachment during sudden starts, stops and turns.
• Riders obstruct the operator’s view, resulting in the
attachment being used in an unsafe manner.
• Keep riders off the Grass Groomer.
• Do not use the Grass Groomer as a step.
Main Components
Description Qty.
Mower Mount (A) 1
Brush Mount (B) 1
Brush (C) 1
Hardware Bag (not pictured)
Description Qty.
5/16" Flange Nut 2
1/2" x 1-1/4" Flange Bolt 1
1/2" Flange Nut 1
3/8" x 2" Carriage Bolt 2
3/8" Washer 2
3/8" Star Washer 2
3/8" Lock Knob 2
3/8" Lock Nut 2
Kit Includes
A
B
C

4
Assembly
1. Attach the brush to the brush mount as shown using
two 5/16" flange nuts. Torque to 8 ft-lb.
2. With the vertical part of the mower mount against
the vertical face at the rear of the tractor, use a
1/2" x 1-1/4" flange bolt (B) and 1/2" flange nut (C) to
fasten to the hole of the rear hitch as shown. Torque
to 37 ft-lb.
3. Connect brush mount assembly to mower mount
using two 3/8" x 2" carriage bolts (D), 3/8" washers
(E), star washers (F) and lock knobs (G). Install 3/8"
lock nuts (H) on the ends of the threads to prevent
knobs from vibrating off.
A
B
C
D
E
F
G
H

5
Operation
Adjustment
1. With the tractor parked on flat ground, loosen knobs
to allow the brush to fall to the ground, then re-tighten
the knobs and the lock nuts.
NOTE: Forcing the brush down before tightening
has minimal effect on the striping pattern, and can
result in faster wear of the brush and/or damage to
mounting brackets.
2. When finished mowing, loosen knobs, raise brush to
highest position, and re-tighten knobs with lock nuts.
Pattern Mowing
• Mowing height should be at least 2-1/2" to 3-1/2", and
mowing direction should be alternated 90° (perpendicular)
at each mowing, from the previous time.
• Mowing passes should slightly overlap for the best results.
• Removing grass clippings with a material collection
system can also enhance the visual effect of a striping
pattern.
Create a Striped Pattern
• Create a striped pattern by mowing in straight-line
passes, alternating the direction of travel with each pass.
Create a Checkered Pattern
• Create a striped pattern, then complete the checkered
pattern by creating another striped pattern perpendicular
to the first one. The intersection of the two striped
patterns creates a checkerboard effect.

6
Warranty
Limited Warranty
TerraKing’s products are guaranteed to be free from defects
in material and/or workmanship and to perform as advertised
when properly assembled, installed, used, and maintained
in accordance with written instructions. Failure to adhere to
this will void the warranty. TerraKing will not be responsible
for labor, loss, or consequential damage of any kind or
character caused by defective parts, or for charges
incurred in the replacement or repair of defective parts.
Warranty Period
The TerraKing Universal Grass Groomer is warranted for a
period of 1 (one) year after the purchase date for residential
use, and 6 (six) months after the purchase date for commercial
use. This product is warranted by TerraKing to the original
purchaser/customer against defects in material and
workmanship under normal operating conditions.
For service parts and customer support, contact
TerraKing at 717-286-1444 or [email protected].
TerraKing by Superior Tech, Inc.
Form # TKOM-001A-1/18

This page intentionally blank
7

This page intentionally blank
8