Teryair AG4E-110V Instruction Manual

Models Descriptions IMPA Code
AG4E-110V/220V Electric Angle Grinders 59 10 21 / 59 10 31
AG5E-110V/220V Electric Angle Grinders 59 10 22 / 59 10 32
AG6E-110V/220V Electric Angle Grinders 59 10 23 / 59 10 33
AG7E-110V/220V Electric Angle Grinders 59 10 24 / 59 10 34
Read this manual carefully before installing, operating or servicing this equipment. It’s the responsi-
bility of the employer to ensure this manual is read by the operator. Please preserve this manual.
is document is issued with Product Serial No
Operation and Maintenance Guide
Electric Angle Grinders

FF-MM-408-REV - 00
Page 2
Operation and Maintenance Guide Electric Angle Grinders
Table of Contents
3 Introducon
3 Technical Data
3 Intended Use
3 SafetyInstrucons
5 Packing Box Contains
6 TestCercateOfMaterials,Performance
7 EuDeclaraonOfConformity
8 WarrantyCercateTY

FF-MM-408-REV - 00
Page 3
Operation and Maintenance Guide Electric Angle Grinders
Introduction
Teryair Electric Angle Grinders are used for continuos heavy duty work for all grinding applications.
Intended Use
e use of Electrically operated Angle Grinders
are recommende for removal of any types of
surface irregularities , Castnig Fins , leveling
of weld joints,Smoothening of Torch /Flame
cut edges , Grinding of stones & masonry with
more eective & ecient manner.
is grinder is user friendly as it ts into even
a tightest / narrow sharp corners and at small
space to perform its dened function.
Safety Instructions
• Stay alert and use common sense - Do
not operate the tool when you are tired or
under the inuence of alcohol, drugs or
medication.
• Always wear eye protectors when using the
angle grinder - Eye protectors must provide
protection from ying particles from the
front and the side.
Teryair
Model No IMPA Code For Wheel
Diam
Power
Supply
Input
Power Frequency No Load Speed
AG4E-110V 59 10 21 100 mm AC110V 1PH 680 W 50/60 Hz 11000 RPM
AG5E-110V 59 10 22 125 mm AC110V 1PH 800 W 50/60 Hz 11000 RPM
AG6E-110V 59 10 23 150 mm AC110V 1PH 1600 W 50/60 Hz 8500 RPM
AG7E-110V 59 10 24 180 mm AC110V 1PH 2000 W 50/60 Hz 6000 RPM
AG4E-220V 59 10 31 100 mm AC220V 1PH 680 W 50/60 Hz 11000 RPM
AG5E-220V 59 10 32 125 mm AC220V 1PH 800 W 50/60 Hz 11000 RPM
AG6E-220V 59 10 33 150 mm AC220V 1PH 1600 W 50/60 Hz 8500 RPM
AG7E-220V 59 10 34 180 mm AC220V 1PH 2000 W 50/60 Hz 6000 RPM
Technical Data
• Always wear ear protectors when using the
angle grinder .
• Do not overreach - Keep proper footing and
balance at all times.
• Do not use tool if Switch does not turn it
“ON” or “OFF”, it is dangerous.
• Check wire before use, and ensure that all
connections are secure.
• Do not carry out any alterations or modi-
cations to the angle grinder .
Work Environment
• Do not disconnect the Tool release the oper-
ating Knob of tool and then switch o elec-
tric supply, disconnect the plug from power
and then make any adjustment , changing of
accessories or storing of tool.
• Store the tool in it’s box in dry , secure envi-
ronment.

FF-MM-408-REV - 00
Page 4
Operation and Maintenance Guide Electric Angle Grinders
• Keep the work area clean and tidy.
• Dress appropriately - Do not wear loose
clothing or jewellery. Tie long hair out of
the way.
• Keep children and visitors away - Do not
let children handle the angel grinder .
• Make sure that any other persons in the
work area are dressed suitably and are
wearing eye and ear protectors.
• Do not operate the tool where there are
Rain / Water or ammable liquids or
gases.
• Keep the supply cod wire away from heat,
oil and sharp edges.
• Do not t the Tool to any stand or clamp-
ing device that may damage the tool.
Recommended Power Supply
Connection
1. Before connecting electricity , make sure
that the supply voltage match the one
marked on tools.
2. Source power must contain ELCB (Earth
Leakage Circuit Breaker) to be present.
Description & Operation
is is powered by an electric motor. e
motor drives a geared head at a right-angle on
which is mounted an abrasive disc or a thinner
cut-o disc, either of which can be replaced
when worn.
is Angle Grinder is with an adjustable guard
and a side-handle for two-handed operation.
Main Body dia Grip ensures the perfect grip
with comfort for user.
Its compact and light weight size ideal for
overhead applications.
e side handle is easily removable and
mounted to wards the front of the tool and
can be set to accommodate both right and le
handed user for maximum comfort and con-
trol for user.
Spindle Lock allows for quick , easy and per-
fect change of disc and accessory.
e Carbon Brushes are easily changeable for
on site maintenance.
Angle Grinder, depending on their speed
range, can be used as sanders, employing a
sanding disc with a backing pad or disc. e
backing system is typically made of hard plas-
tic, phenolic resin, or medium-hard rubber
depending on the amount of exibility desired.
Follow the instructions carefully mentioned
here to enhance the life and performance of
your grinder.

FF-MM-408-REV - 00
Page 5
Operation and Maintenance Guide Electric Angle Grinders
Packing Box Contains
Main Tool with Loc Nut 1 Unit
18 AWG x 2 Core Cod Wire 1.5 Mtr.Long
With 2 Pin Molded Plug 1 no
Wheel Guard 1 no
Carbon Brush 2 no
Side Handle 1 no
Tightening Spanner For Lock Nut 1 no
Operation and Maintenance Manual 1 no

FF-MM-408-REV - 00
Page 6
Operation and Maintenance Guide Electric Angle Grinders
TEST CERTIFICATE OF MATERIALS, PERFORMANCE
Date :
Model number :
Part description & s.No. :
We hereby certify that the above referenced product has tested and inspected in accordance with our standard test proce-
dures
and meets the specications for material and performance values as published in our literature. We further certify that the
product has been given our standard factory test and meets all quality and performance standards established by the compa-
ny. is product is certied to be produced in our factory, and is of current production.
Authorised Signatory
Q.A Manager
Place - Vasai, Maharastra

FF-MM-408-REV - 00
Page 7
Operation and Maintenance Guide Electric Angle Grinders
EU DECLARATION OF CONFORMITY
We hereby certify that the Listed Product stipulated below comply with all relevant provisions of the machinery direc-
tive (2006/42/EC) and the national laws and regulations adopting this directive.
Description :
Model Number :
Date :
Serial Number :
Is in conformity with the provisions of the following European Directives: (2006/42/EC) Machinery Safety and Har-
monized standards
ISO 12100-1: 2010: Safety of Machinery –general Principles for Design –Risk Assessment and Risk Reduction.
Registered Oce : 416 Gundecha Industrial Complex, Akuril Road,
Kandivali East, Mumbai – 400101, Maharashtra, India.
Web site : www.teryair.com
Works : A-1, Tirupati Udyog Nagar, Sativali Road, Vasai East,
Palghar – 401208, Maharashtra, India.
CE certication registration no – C E 16832
Issued by – BMQR Certications Pvt Ltd.
www.cemarking-india.com
Valid Till – 03/11/2021
Signed for and on behalf of
TERYAIR EQUIPMENT PVT. LTD. Place of Issue:
Date:

FF-MM-408-REV - 00
Page 8
Operation and Maintenance Guide Electric Angle Grinders
Warranty Certificate
Every product manufactured by Teryair
is built to meet the highest standards of quality.
Teryair warrants that the Products, accessories and parts manufactured or supplied
by the company be free from defects in material and workmanship for a period of six
months from date of Teryair authorized dealer invoice to customer, or one year from
date of Teryair invoice to dealer, whichever is earlier. Failure due to normal wear,
misapplication, or abuse is, of course, excluded from this warranty.
Since the use of Teryair products and parts is beyond our control, Teryair cannot
guarantee the suitability of any product or part for a particular application and Teryair
shall not be liable for any consequential damage or expense arising from the use or
misuse of its products on any application. Teryair does not warranty bought out
products or components such as electric motors and hardware but will assist in
directing warranty queries to the dealer/manufacturer responsible. Teryair
responsibility is limited solely to replacement or repair of defective Teryair products
or components.
Dealer/End User shall have no right or remedy and Teryair shall have no liability or obligation under the warranty, if:
(i) a Product is altered, changed, modified or tampered with in any way, (ii) a Product is damaged after deposit with the
transporter for shipment; (iii) a Product is not properly preserved, packaged, stored, processed or handled after receipt; (iv) a
Product is not used and maintained in accordance with Teryair's recommended operating and maintenance manuals,
instructions and procedures, if any; (v) a Product is not properly incorporated or installed in, or not properly combined with, an
Other Product; (vi) the issue with a Product is directly or indirectly attributable to, or directly or indirectly results from or arises
out of, a failure, substandard performance or other issue with another product, material, component or part not supplied by
Teryair; (vii) the issue with a Product is directly or indirectly attributable to, or directly or indirectly results from or arises out of,
compliance with any design, specification or other specific requirement of Dealer/End User; (viii) a Product is used in a manner,
with a substance or for a purpose other than the normal manner, substance and purpose for which it is intended or is otherwise
subjected to abnormal use or service; (ix) a Product is subjected to a power surge, brown out or other similar occurrence; (x)
the issue with a Product is directly or indirectly attributable to, or directly or indirectly results from or arises out of, normal wear
and tear of such Product (including, without limitation, things such as worn seals, diaphragms, balls, O rings, gaskets, chisels,
cutters, hoses and other such wearing components; (xi) the issue with a Product is directly or indirectly.
Dated :
Product Model Number :
Product Serial Numbar : Ajay Bhagat, Q.A. Manager
(Company Seal)

FF-MM-408-REV - 00
Page 9
Operation and Maintenance Guide Electric Angle Grinders
is page is intentionally
Le blank.