Tesla smart HKS1601A10 User manual

Tesla smart
1 www.tesla-smart.com
16x1 HDMI KVM Switch
# HKS1601A10
This 16x1 HDMI KVM switch provides you with great flexibility in integrating cross-platform
computer equipment easily. It makes you available to switch easily and reliably between
any HDMI computers using one HDMI compliant display.
The 16x1 HDMI KVM switch supports USB 2.0 hub and USB 2.0 keyboard /mouse. By
using USB 2.0 hub ports on the KVM, you even can attach USB drive, printer, barcode
scanner or other USB devices to the KVM. Switching can be controlled through variable
methods, such as the front panel source selector buttons, RS232 commands, IP
commands, IR signals and hot keys on keyboard.
With EDID emulators in every input ports, keep PCs always have correct display
information, prevent display settings changed while switching input ports.
Features
Using one USB console controls 16 HDMI computers.
Support Unix /Windows /Debian /Ubuntu /Fedora /Mac OS X /Raspbian /Ubuntu for
Raspberry Pi and other Linux based system
With EDID emulators in every input ports, keep PCs always have correct display
information
Support hot plug, connect or disconnect devices to the KVM switch in any time and
without turn off devices
Support auto switching to monitor computers in a specified time interval
Support front panel buttons, IR signals, keyboard hot keys, RS232 serial commands or
IP commands to control KVM switch.
Available to use keyboard without any delay after switch input sources.
Support resolution up to 3840*2160@30Hz
With extra standard USB 2.0 hub port, it is possible to connect bar code scanner, USB
hard drive or other USB devices to KVM just as you have plug these devices directly to
computer.
Supports DVI-D single link sources and displays with the use of HDMI-to-DVI adapters.
Packing list
1 * 16x1 HDMI KVM Switch
1 * DC 12V 2A Power Adapter
1 * IR Remote Control
1 * IR Receiver Cable
1 * 3 Pins Connector (For RS232)
2 * Rack-ears
1 * Quick-Start Guide

Tesla smart
2 www.tesla-smart.com
Panel descriptions
1. IR receiver extension cable input
2. DC 12V Power Adapter
3. 3 Pins jack for RS232 console
4. USB keyboard and mouse input
5. HDMI output port
6. USB 2.0 Hub ports
7. HDMI input ports
8. USB data (Connected to PCs)
9. Auto scan time interval settings
[MIN]: Press button [MIN] to loop between 0~59 minutes.
[SEC]: Press button [SEC] to loop between 0~59 seconds.
[Set]: After setting minutes and seconds by buttons [MIN] and [SEC], press button [Set] to enter final
scan time interval setting.
10. Status indicator:
Green LED: Normal status
Red LED: Auto scanning mode
11. IR receiver
12. LED display: display current selected input source
13. Keypad:
[1~9]: Press these buttons to directly select input 1~9 sources.
[0/Close]: Press this button directly will turn on or turn off the display out; Press [1+] then [0/Close] to
select input 10
[Scan]: Press this button to start or stop automatically scan between input 1 to input 16. The interval
time can be set by buttons [Set], [MIN], [SEC] as described above.
14. LAN: TCP/IP console interface
15. Power switch: Turn on or off the power.

Tesla smart
3 www.tesla-smart.com
Connection diagram

Tesla smart
4 www.tesla-smart.com
Specification
HKS1601A10
16x1 HDMI KVM Switch
Functionality:
Auto Scan
Yes
Port selection
Front panel buttons
Yes
Keyboard hotkeys
Yes
IR remote control
Yes
Console commands
RS232 / IP
Technical:
Max. Resolution
3840x2160@30Hz
Auto to get EDID
Yes
Data rate
10.2 Gbps
Auto scan interval
5~3600 Seconds
Beep Sound
On/Off
OSD
No
Supported OS
Unix/Windows/Debian /Ubuntu /Fedora /Mac OS X/
Raspbian /Ubuntu for Raspberry Pi and other Linux
based system
Console ports
Keyboard emulation
1 * USB Type A
Mouse emulation
1 * USB Type A
USB 2.0 Hub ports
2 * USB Type A
Video /Audio
1 * HDMI Type A
RS232
3 Pins jack
LAN (TCP/IP)
1 * RJ45
IR extension input
1 * AUX
System ports
USB Data
16 * USB Type B
Video / Audio
16 * HDMI Type A
ESD protection
Human body model - ±8kV (Air-gap discharge)
Mechanical:
Chasing material
Metal
Product Dimensions
440 (L) x 150 (W) x 44.5 (H) mm
Item Weight
1800g