Tesla smart HSW0801A1U User manual

1
ŸAuto input detect and switch

2

3

4

5

6

7

8
select input ports 1~8;
16X1: Press [1]~[16] directly to select input port 1-16;
2. Mute/ unmute buzzer
Pr te
buzzer.
3.1 Front

9

10

11
IR Remote Control:
Turn on/off auto input detection
When plug new HDMI input source to
the 8/16 ports Switch or power on the
HDMI input source, the HDMI switch
will automatically select the input port
that is connected to this input source.
press [M] again to stop auto input
detection
2
3
4
1
Turn on/off auto scanning mode
Switch will automatically switch among
all the powered on input sources within
the specified time interval, press [P]
again to stop auto scanning
2
Select input port
8x1: Press [1]~[8] to select input 1~8;
16x1: Press [1]~[16] to select input
1~16
3
Mute/unmute buzzer
4
Note: 1.Other buttons are invalid.
2. The battery slot on the back of remote control is equipped with an
insulation splice . Remove it when you use it and reinsert it into the
remote control after use to extend battery life.
3. Please install AAA batteries before use.

Warranty Information :
31.00.0182-V006