TESTO BN3464JH User manual

Instruction Manual
34° Metal Connector
WARNING
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL, TO UNDERSTAND
AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. IF YOU HAVE ANY QUESTIONS,
CONTACT WITH OUR REPRESENTATIVES OR DISTRIBUTOR.
BN3464JH No.01530000290
BN3438JH No.01630000290
BN3460JH No.02810000290

2
CONTENTS
PAGE
TOOL SPECIFICATIONS
NAIL SPECIFICATIONS
EXTERNAL TOOL PARTS
SAFETY INSTRUCTIONS
LUBRICATION AND MAINTENANCE
ACTUATING TOOL
OPERATING THE TOOL
TROUBLESHOOTING GUIDE
3-4
3-4
3-4
5-7
8
8
9-10
11

TOOL SPECIFICATIONS
NAIL SPECIFICATIONS
EXTERNAL TOOL PARTS
3
Height ............................................................................................. : 11.4" (290mm)
Width .............................................................................................. : 3.5" (89mm)
Length ............................................................................................ : 11.8" (299mm)
Weight ............................................................................................ : 4.6 lbs. (2.1 kgs)
Recommended Operating Pressure ............................................. : 70-120 psi (4.9-8.3 bar)
Air Consumption ........................................................................... :
Loading Capacity .......................................................................... : up to 32 nails
NOISE CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 3774, ISO 11201:
A-weighted single-event sound pressure level at operator's position.. : LpA,1s =
A-weighted single-event sound power level ..................................... : LwA,1s =
A-weighted single-event surface sound pressure level .................... : LpA,1s =
VIBRATION CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 8862-1:
Weighted root mean square acceleration .......................................... = 3.6 m/s2
Paper collated full round head metal connector nails
Nail Lengths .................................................................................. : 1 1/2"(38mm)
Shank Diameter ............................................................................ : .131"&.148" (3.3 & 3.8mm)
Nail Stick Angle ............................................................................ : 34°
360°
EXHAUST
TRIGGER
MAGAZINE
RETAINER
SAFETY NOSE
ASSEMBLY
PUSHER
MAGAZINE
88 dBA
101 dBA
88 dBA

4
HJ0643NBHJ4643NB.oNledoM
Length )mm703(”1.21)mm703(”1.21
Width )mm901(”3.4)mm901(”3.4
Height )mm953(”1.41)mm953(”1.41
Weight )sgk5.2(sbl5.5)sgk5.2(sbl5.5
Operating Pressure 70 ~ 120 psi
(4.9 ~ 8.3 bar)
70 ~ 120 psi
(4.9 ~ 8.3 bar)
Loading Capacity slian03slian03
Accessories kooHtleBkooHtleB
A
-weighted single-event
sound pressure level
--- LpA, 1s, d
ABd29ABd29
A
-weighted single-event
sound power level
--- LWA, 1s, d
ABd101ABd101
Weighted root mean
square acceleration
--- m/s22.7m/s2s/m7.2 2
Model No. P3833NCC3833NCP0933NCC0933NC
Nail Length 2”-3 1/2”
(50-90mm) 2”-3 1/2” (50-90mm) 2”-3 1/4” (50-83mm) 2”-3 1/4” (50-83mm)
Shank Diameter .099”-.131”
(2.5-3.3mm)
.099”-.131”
(2.5-3.3mm) .099”-.131” (2.5-3.3mm) .099”-.131” (2.5-3.3mm)
Shank Type Smooth,
Ring, Screw Smooth, Ring, Screw Smooth, Ring, Screw Smooth, Ring, Screw
Model No. HJ0643NBHJ4643NB
Nail Angle 34°43 °
Shank Diameter Ø.131” & .148”
(3.3 & 3.8mm)
Ø.162”
(4.0mm)
Nail Length 1 1/2” & 2 1/2”
(38 & 64mm)
1 5/8” & 2” & 2 1/4”
(40 & 50 & 60mm)
BELT
HOOK
SAFETY NOSE
ASSEMBLY
360° EXHAUST
TRIGGER
MAGAZINE
RETAINER
MAGAZINE
PUSHER
TOOL SPECIFICATIONS
NAIL SPECIFICATIONS
EXTERNAL TOOL PARTS

5
SAFETY INSTRUCTIONS
WARNING: Read this manual and understand all instructions before operating the tool.
If you have any questions, please contact with our authorized representatives.
OX
CO2
The operator and all persons in the general area should wear
safety glasses to guard against flying fasteners and debris,
which could cause severe eye injury. Safety glasses are per
requirements of the Regulatory Authority. Always wear hearing
protection and hard hat.
Never use oxygen, carbon dioxide or any other bottled gas as
a power source for this tool Danger of explosion and/or serious
personal injury may result.
Use only clean, dry regulated compressed air at recommended
pressure
Tools shall not be connected to a compressor which potentially
exceeds 175 psi or 12 bar.
Air hose rated for a maximum operating pressure of 150 psi
(10.3 bar) or 150% of the maximum system pressure, whichever,
is higher.
Disconnect tool from air supply and remove fasteners from
magazine before doing tool maintenance, clearing a jammed
fastener, leaving work area, moving tool to another location, or
handing the tool to another person.
120 Psi
8.3 bar
70 Psi
4.9 bar