Teton Grill XA Series User manual

Teton Dynamics
P.O. Box 1044
San Leandro, CA 94577
Teton Dynamics
P.O. Box 1044
San Leandro, CA 94577
XA SERIES
XA40K-XA80K
Teton Aeration Kit
ASSEMBLY INSTRUCTIONS

TETON AERATION KIT
XA40K-XA80K
VERSION AUG 2020
www.tetonus.com
800.752.0399
[e-mail]
INTRODUCTION
The preceding configuration shows the simple assembly for assembling your new Teton Aeration Kit.
CONTENTS OF KIT
WELCOME TO THE WORLD OF TETON,
NATURAL RELIABILTY!
You Made The Right Choice Investing In These Quality
Products. Thank You And Enjoy.
BEFORE USING THESE PRODUCTS, PLEASE READ THESE
INSTRUCTIONS CAREFULLY AND FAMILIARIZE YOURSELF
WITH THE ITEMS. PLEASE KEEP ASSEMBLY MANUAL IN A
SAFE PLACE FOR FUTURE REFERENCE.
XAP40/XAP60K/XAP80
Air Pump
WAH38.25 Air Tubing
(3/8” x 25ft)
SSC8 Clamps x 2 SHM3858 Fitting
XAS6HD/XAS8HD/XAS12HD
Air Stone

STEP 1
• Place a stainless steel clamp (provided)
onto one end of the tubing. Then with the
air stone in hand, slip the hose onto the
barbed fittings, applying a little pressure.
Once the tubing is on the fitting, go ahead
and tighten the clamp with a screw driver.
STEP 2
• Remove pump from the box and locate
the parts bag (provided in the pump box).
Connect the ring style clamps by squeezing
them onto both ends of the rubber cou-
pling elbow. Then connect it to the pump
on the port marked “OUT.” Then slip the
other stainless clamp onto remaining end of
the tubing. Insert the fitting into the tubing
and once again tighten the clamp with a
screw driver. Next insert the other end of
the fitting into the rubber elbow.
FIGURE A
FIGURE B

SYMBOLS AND MEANING
STEP 3
• Locate air pump in an area free of dust and
avoid areas prone to flooding. Air pumps
located in areas below water level will require
a check valve to prevent potential water flow
back into the pump. Then place the air stone
in the desired area of the pond and plug in the
power cord to a GFCI protected power supply.
DANGER
• DANGER: Keep the pump
out of the reach of children!
• Warns that the failure to
follow the directions given
could cause serious risk to
individuals or objects.
WARNING
• WARNING: This sign warns
the operator that the failure
to follow instructions, may
damage the pump or the
system.
FIGURE D
Please consult your retailer for quality original Teton replacement parts.
Visit www.tetonus.com for your nearest dealer.
800.752.0399
[e-mail]