Teton Grill XA Series User manual

XA SERIES
XA20K
Teton Aeration Kit
ASSEMBLY INSTRUCTIONS
Teton Dynamics
P.O. Box 3031
San Leandro, CA 94578-0031
Teton Dynamics
P.O. Box 3031
San Leandro, CA 94578-0031

TETON AERATION KIT
XA20K
VERSION AUG 2020
www.tetonus.com
800.752.0399
[e-mail]
INTRODUCTION
The preceding configuration shows the simple assembly for assembling your new Teton Aeration Kit.
CONTENTS OF KIT
WELCOME TO THE WORLD OF TETON,
NATURAL RELIABILTY!
You Made The Right Choice Investing In These Quality
Products. Thank You And Enjoy.
BEFORE USING THESE PRODUCTS, PLEASE READ THESE
INSTRUCTIONS CAREFULLY AND FAMILIARIZE YOURSELF
WITH THE ITEMS. PLEASE KEEP ASSEMBLY MANUAL IN A
SAFE PLACE FOR FUTURE REFERENCE.
XAP20 Air Pump XAM4 Air Valve XAS5 Air Stones x 2
(1.25” x 5”)
15316C Air Tubing x 2
(3/16” x 15ft)

STEP 1
• With the air stones in hand, slip the tubing
onto the barbed fittings, applying a little
pressure.
STEP 2
• Locate 4-way manifold (provided with kit).
While applying pressure, connect both hose
ends onto the two barbed fittings. Open
the valves on the two connections you have
connected to and close the valves on the
remaining two outlets.
STEP 3
• Remove pump from the box and locate
the parts bag (provided in the pump box).
Connect the ring style clamps by squeezing
them onto both ends of the rubber cou-
pling elbow. Then connect it to the pump
on the port marked “OUT.” Attach the other
end of rubber coupling onto the large end
of the 4-way manifold tee.
FIGURE A
FIGURE B
FIGURE C

SYMBOLS AND MEANING
STEP 4
• Locate air pump in an area free of dust and
avoid areas prone to flooding. Air pumps
located in areas below water level will require
a check valve to prevent potential water flow
back into the pump. Then place the airstones
in the desired area of the pond and plug in the
power cord to a GFCI protected power supply.
DANGER
• DANGER: Keep the pump
out of the reach of children!
• Warns that the failure to
follow the directions given
could cause serious risk to
individuals or objects.
WARNING
• WARNING: This sign warns
the operator that the failure
to follow instructions, may
damage the pump or the
system.
FIGURE D
Please consult your retailer for quality original Teton replacement parts.
Visit www.tetonus.com for your nearest dealer.
800.752.0399
[e-mail]