TEUCER LR-4RGBCCT User manual

4 Zone RF Remote Control
for Single Colour, Tunable White, RGB, RGBW
and RGBCCTLED strip
www.teucerled.co.uk
V002-11-2019
The LR-4RGBCCT remote enables one to control up to 4 zones of Single Colour, Tunable White, RGB/RGBW
and RGBCCT LED strips. It features a touch colour wheel which offers smooth and continuous colour
changing options and enables creation of colourful static and dynamic effects.
Product Description
Remote Technical Specification
Order Code LR-4RGBCCT
Type RF Remote
Power 3V DC (2x AAA battery)
Operation Frequency 2.4GHz
Dimension 53x122x17mm (WxLxH)
Weight: 60g
• Easy control of single colour, tunable white,
RGB/RGBW and RGBCCT LED strips for up to
4 zones independently or simultaneously
• 2.4GHz wireless technology, remote distance
of up to 30m
• Save lighting functions and preferences with
scene save
• Controleachzoneseparatelyorsimultaneously
• Auto-transmitting function to achieve greater
distances between receivers and the remote
• PWM dimming enables flicker-less dimming
• Built-in dynamic play modes with receiver
auto-synchronization
• Each zone can have different LED strip type
Features
LR-4RGBCCT
Compatible RGBCCT receiver Technical Specification
Order code R3C R4C R5C
Channels 3 (RGB) 4 (RGBW) 5 (RGBCCT)
Type RF receiver RF receiver RF receiver
Input Voltage 12-24V DC 12-36V DC 12-24V DC
Current 3x4A 4x5A 5x3A
Output 3X(48-96W) 4X(60-180W) 5X(36-72W)
Note Constant
voltage
Constant
voltage
Constant
voltage
Dimension 33x97x18mm
(WxLxH)
45x175x27mm
(WxLxH)
38x114x20mm
(WxLxH)
R3C
R4C
R5C

4 Zone RF Remote Control
for Single Colour, Tunable White, RGB, RGBW
and RGBCCTLED strip
www.teucerled.co.uk
V002-11-2019
Controller layout
CCT RGB
S1S2
124
3
ON/OFF button
LED indicator ON/OFF button LED indicator
RGB/CCT colour wheel
Zones
Increase/Decrease
RGB/CCT brightness
RGB/CCT colour presets
Recall/Save scene
Dynamic modes
Speed/Saturation
Single colour receiver wiring diagram
+
+
+
R3C
Single colour LED strip
Power supply
+
+
+
R3C
Single colour LED strip
Power supply
Tunable White receiver wiring diagram
R3C
Tunable white LED strip
Power supply
V+
WW
NW
R3C
Tunable white LED strip
Power supply
V+
WW
NW

4 Zone RF Remote Control
for Single Colour, Tunable White, RGB, RGBW
and RGBCCTLED strip
www.teucerled.co.uk
V002-11-2019
RGB Receiver wiring diagram
RGBW Receiver wiring diagram
R3C
RGB LED strip
Power supply
+
R4C
RGBW LED strip
Power supply
+
R
G
B
W
RGBCCT Receiver wiring diagram
RGB+CCT LED strip
Power Supply
24V
R5C
DC
Constant Voltage AC110-230V
WW
+
-
+
INPUT
12-24VDC
Uin=12-24VDC
Iin=15.5A
RG B +CCT 5C H L ED Cont r olle r
Uout=5×(12-24)VDC
Iout=5×3A
Pout=5×(36-72)W
Temp Range: -20℃~+55℃
Made i n China
OUTPUT
W4 +
+
2.4G wireless control RoHS
W5
W
0.5-1.5m m2
6-8mm

4 Zone RF Remote Control
for Single Colour, Tunable White, RGB, RGBW
and RGBCCTLED strip
www.teucerled.co.uk
V002-11-2019
2) Choose the zone on the remote to allocate the receiver within 5 seconds after pressing the match button.
The LED indicator on the receiver will flash rapidly 5 times and then stop flashing. The controller is now
synchronised with the receiver.
CCT RGB
S1S2
124
3
Press the zone
you wish to allocate
3) Repeat the process to allocate zones for all
receivers.
4) To restore the receiver to the factory default settings
and delete the allocated controller, press and hold the
match button on the receiver longer than 5 seconds
until the LED indicator flashes quickly 5 times.
Note! RF technology allows for greater flexibility when it comes to controlling simple or complex lighting
installations without the need of additional cabling. There are some limitations where installations have
the receivers enclosed in electrical boxes or hidden away in a ceiling , reducing the RF signal strength and
therefore the communication range.
In order to overcome these RF Signal restrictions we suggest the following when synchronising our RF
controllers and receivers:
• Keep the distance within 10 meters from the controller to the receiver. The remote can operate up to 30
meters if signal is uninterrupted by obstacles.
• When expanding your lighting, always try and use a signal repeater (PR-RGB(N)), where possible.
Synchronising the wall panel to the receiver
1) Ensure the receiver has power. Press the match button on the receiver. LED Indicator will start flashing
slowly.
Match button
LED Indicator
R3C Match button
LED indicator
Push -Di m
GND
R4C
Match button
LED indicator
R5C
+
-
+
INPUT
12-24VDC
Uin=12-24VDC
Iin=15.5A
RG B+ C CT 5 CH LE D Co n tr oll er
Uout=5×(12-24)VDC
Iout =5×3A
Pout =5×(36-72)W
Temp Range: -20℃~+55℃
Mad e in China
O UT PUT
W4 +
+
2.4G w ire less co ntr ol RoHS
W5
0.5-1.5mm2
6-8mm

4 Zone RF Remote Control
for Single Colour, Tunable White, RGB, RGBW
and RGBCCTLED strip
www.teucerled.co.uk
V002-11-2019
Controlling your LED strip
CCT RGB
S1S2
124
3
Press to turn ON/OFF all zones.
Touch the colour wheel to change RGB colour or CCT (WW/CW) colour in
selected zones. Press RGB or CCT button to switch between RGB and CCT wheel.
124
3Press to select and turn ON the desired zone.
Press and hold to turn off desired zone.
Press to Adjust RGB or CCT brightness in 10 levels.
Long press to increase or decrease brightness smoothly.
CCT Press to adjust colour temperature of WW/CW channel in 10 levels.
Long press to adjust colour temperature of WW/CW channel smoothly.
Press to change 24 presetted RGB colours
RGB
Press to run dynamic play modes, press and hold to run automatic cycle mode.
In dynamic play modes press to adjust the speed of the dynamic mode.
For static RGB colour press to adjust 11 levels of saturation of the selected colour.
Press and hold to adjust 256 levels of saturation of the selected colour.
S1S2
Press and hold to save current colour state into S1/S2 scene.
Press to recall the S1/S2 scene. Scene positions are saved across all 4 zones.
Each zone can be set up to control different types of LED strips eg. Single Colour, Tunable White, RGB,
RGBW and RGBCCT LED strip. To change LED strip type press the desired zone together with LED strip
type buttons for more than 2s.
For example to set the Zone 1 LED strip type to RGB, press and hold 1 + RGB buttons for more than 2s until
the LED indicator on the remote wit turn green. Each zone can have different LED strip type.
RGB
CCT
124
3
124
3
124
3
124
3
124
3
+
+
+
+
+
Single colour
Tunable white (WW/CW)
RGB
RGBW
RGBCCT
Press and hold buttons for more than 2 sec to set the LED strip mode to RGB on Zone 1.
Indicator on the remote will turn green to confirm LED strip mode change.
RGB
1+
V001

4 Zone RF Remote Control
for Single Colour, Tunable White, RGB, RGBW
and RGBCCTLED strip
www.teucerled.co.uk
V002-11-2019
Warranty
• Products must be installed and serviced by qualified
electrician.
• Please ensure the receiver is mounted in a water proof
enclosure if installed in an outdoor environment,
avoiding metallic enclosures.
• Always ensure products are mounted in areas with
adequate ventilation to avoid overheating.
• Please ensure outputs of any power suppliers used in
conjunction with this product comply with its working
voltage.
• Never install product whilst connected to power and
double check connections before switching on to
avoid short circuits.
Safety
Should this product fail during the 5 year warranty
period it will be replaced free of charge, subject to the
correct installation of the original product in accordance
with applicable and appropriate electrical codes and
instructions provided by Teucer, as well as subsequent
return of the faulty unit. Teucer does not accept
responsibility for any installation costs associated with
the replacement of this product and Teucer reserves
the right to alter specifications without prior notice. For
further information, please see our Terms and Conditions.
www.teucerled.co.uk/terms-and-conditions/
No. Name No. Name
1. RGB jump 6. RGB fade in and out
2. RGB smooth 7. RED fade in and out
3. 6 colour jump 8. GREEN fade in and out
4. 6 colour smooth 9. BLUE fade in and out
5. Color temperature smooth 10. WHITE fade in and out
Dynamic play mode presets
Troubleshoot
Problem Cause Corrective
No light • No power.
• Wrong connection or unsecure con-
nection.
• Check the power.
• Check the connection.
Wrong Colour • Wrong connection of RGBW wires. • Re trace and reconnect RGBW wires.
Uneven intensity
between front and
rear of the strip, with
voltage drop
• Output cable is too long.
• Cable diameter is too small.
• Overload beyond driver capability.
• Overload beyond receiver capability.
• Reduce cable or loop supply.
• Change to a thicker cable.
• Replace with a suitable higher power
driver.
• Add a power repeater.
No response
from the remote
• The battery has no power.
• Beyond controllable distance.
• The controller isn’t synchronised with
the remote.
• Replace battery.
• Reduce remote to receiver distance.
• Re-sync the remote.
Teucer (UK) Ltd
Bedford House, Fulham Green
69-79 Fulham High Street
London, SW6 3JW, UK
Tel: [phone]
Fax: [phone]
www.teucerled.co.uk
[e-mail]
Please note! RF technology allows for greater flexibility when it comes to controlling simple or complex lighting
installations without the need of additional cabling. There are some limitations where installations have the receivers
enclosed in electrical boxes or hidden away in a ceiling , reducing the RF signal strength and therefore the communication
range.
In order to overcome these RF Signal restrictions we suggest the following when synchronising our RF controllers and
receivers:
• Keep the distance within 10 meters from the controller to the receiver. The remote can operate up to 30 meters if
signal is uninterrupted by obstacles.
• When expanding your lighting, always try and use a signal repeater (PR-RGB(N)), where possible.