Texas Instruments TAS5705EVM2 User manual

User's GuideSLOU223A – December 2008 – Revised January 2009
TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER
WITH EQ and DRC
This manual describes the operation of the TAS5705EVM2 to evaluate the performance of the TAS5705.This main contents of this document are:•Details on how to properly connect a TAS5705 Evaluation Module (TAS5705EVM2) and the details ofthe EVM.•Details on how to install and use the GUI to program the TAS5705.•Details on how to use the audio processing features like EQ and DRC.•Quick-Start Guide for the common modes in which TAS5705EVM2 can be used
Contents1 Overview ...................................................................................................................... 21.1 TAS5705EVM2 and MC57xxPSIA Features .................................................................... 42 Installation .................................................................................................................... 52.1 EVM Installation ..................................................................................................... 52.2 Software Installation ................................................................................................ 83 Using the EVM Software .................................................................................................... 93.1 Connect the GUI to the EVM ...................................................................................... 93.2 I2C Memory Tool ................................................................................................... 93.3 Volume Function .................................................................................................. 103.4 Biquad GUI ......................................................................................................... 103.5 DRC GUI ........................................................................................................... 113.6 Disable Biquads ................................................................................................... 134 TAS5705EVM2 Quick-Start Setup Guide ............................................................................... 135 Jumpers and Control Utilities on MC57xxPSIA board ................................................................. 145.1 RCA/OPTICAL Jumpers .......................................................................................... 145.2 Switches ............................................................................................................ 145.3 LED Indicators ..................................................................................................... 146 Board Layouts, Bill of Materials, and Schematic ...................................................................... 156.1 TAS5705EVM2 and MC57xxPSIA Board Layouts ............................................................ 156.2 Bill of Materials .................................................................................................... 166.3 Schematic .......................................................................................................... 177 Quick-Start Setup Guide .................................................................................................. 177.1 2 X BTL BD (Default: BD mode) ................................................................................ 18Appendix A 2 X BTL BD (Default: BD mode) ................................................................................ 20Appendix B 2 X BTL AD (Default: AD mode) ................................................................................ 21Appendix C BD 2.1 Using External SUB ..................................................................................... 22Appendix D AD 2.1 Using External SUB ..................................................................................... 23
List of Figures
1 TAS5705EVM2 Printed-Circuit Board ..................................................................................... 32 Complete System and EVM Signal Path Overview ..................................................................... 43 General Connection Picture ................................................................................................ 54 Connecting TAS5705EVM2 to MC57xxPSIA ............................................................................ 65 Graphical User Interface Initial Window .................................................................................. 8Equibit is a trademark of Texas Instruments.I
2
C is a trademark of Philips Corporation.
SLOU223A – December 2008 – Revised January 2009 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC 1Submit Documentation Feedback

1 Overview
Overview www.ti.com
6 Memory Tool Window ....................................................................................................... 97Volume Control ........................................................................................................... 108 Selecting Biquad GUI ...................................................................................................... 109 Filter Creation Tool Window .............................................................................................. 1110 DRC Parameters ........................................................................................................... 1111 Activating the DRC GUI ................................................................................................... 1212 Time Constants Button .................................................................................................... 1213 Disabling the Biquads ...................................................................................................... 1314 TAS5705EVM2 Top Assembly ........................................................................................... 1515 MC57xxPSIA Top Assembly .............................................................................................. 15
List of Tables
1 Recommended Power Supplies ........................................................................................... 62 Bill of Materials for TAS5705EVM2 ...................................................................................... 16
The TAS5705 evaluation module (TAS5705EVM2) demonstrates the TAS5705 device from TexasInstruments.
The TAS5705 combines a high-performance PWM processor with a class-D audio power amplifier. ThisEVM can be configured with two bridge-tied loads (BTL) (2.0). When operated with an external subwooferpower stage such as the TAS5601EVM4. TAS5705 supports two bridge-tied channels plus a bridge-tiedsubwoofer using an external TAS5601amplifier.For detailed information about the TAS5705 device, reviewthe device data sheet, document number SLOS606 . Pulse Width Modulator (PWM) is based on TI'sEquibit™ technology. Review the board schematic and TAS5601EVM4 documents.
The EVM software with its graphic user interface facilitates evaluation by providing access to the TAS5705registers through a USB port. Refer to the Using the EVM Software section for further details.
2TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC SLOU223A – December 2008 – Revised January 2009Submit Documentation Feedback

www.ti.com Overview
Figure 1. TAS5705EVM2 Printed-Circuit Board
The TAS5705EVM2, together with other TI components on this board, is a complete 2.1-channel digitalaudio amplifier system. The MC57XXPSIA Controller board includes a USB interface, a digital input(SPDIF), analog inputs via the ADC (PCM1808), power inputs and other features like a mute function andpower down.
SLOU223A – December 2008 – Revised January 2009 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC 3Submit Documentation Feedback

2CH Analog Input
From Other Source/
Digital Out
PC Interface
SPDIF/
Optical, Coax TAS5705
Left
Right
TAS5705EVM2MC57xxPSIA
1.1 TAS5705EVM2 and MC57xxPSIA Features
Overview www.ti.com
Figure 2. Complete System and EVM Signal Path Overview
•Channel evaluation module design.•Self-contained protection systems and control pins•USB interface•Standard I
2
S data input using optical or coaxial inputs•Analog input through analog to digital converter•Subwoofer connection—the PWM terminal provides the PWM signal and power to an externalsubwoofer board•Double-sided plated-through PCB, 1-oz copper•Access to control signal gain and data format through EVM-software graphic user interface (GUI)
TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC4 SLOU223A – December 2008 – Revised January 2009Submit Documentation Feedback

2 Installation
2.1 EVM Installation
Analog In to ADC
Coaxial SPDIF Input
Optical SPDIF Input
USB Port
5V Supply for
System Power
8-24V Supply for Output Power
Speaker
Out A & B
Speaker
Out C & D
TAS5705EVM2 & MC-57xxPSIA
General Connection Picture
TAS5706EVM2
2.1.1 Connecting the TAS5705EVM2 to MC57xxPSIA
www.ti.com Installation
This section describes the EVM and software installation.
Figure 3. General Connection Picture
The following are the basic tools for the initial EVM power up.•5-V, 1-A power supply (VIN)•8–24-V, 4-A power supply (PVCC)•Banana-style test leads for power supplies and speakers•Optical or coaxial cable for SPDIF interface based on signal source•USB cable•EVM software•Two 8- Ωspeakers or loads
The following sections describe the TAS5705EVM2 board in regards to power supply (PSU) and systeminterfaces.
On the right side of the MC57xxPSIA is a terminal block and another on the left of the TAS5705EVM2(labeled J1). Carefully place the MC57xxPSIA block above the TAS5705EVM2 block and gently pushdown.
SLOU223A – December 2008 – Revised January 2009 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC 5Submit Documentation Feedback

2.1.2 PSU Interface
Installation www.ti.com
Figure 4. Connecting TAS5705EVM2 to MC57xxPSIA
The TAS5705EVM2 is powered by two power supplies connected to the MC57xx controller board: a 5-Vpower supply (VIN) and a 8-V to 24-V (PVDD) power supply. The 3.3-V level is generated on the board bya voltage regulator from the 5-V supply.
Note: The power-supply cable length must be minimized. Increasing the length of the PSU cableincreases the distortion of the amplifier at high output levels and low frequencies
The maximum output-stage supply voltage depends on the speaker load resistance. Check therecommended maximum supply voltage in the TAS5705 data sheet.
Table 1. Recommended Power Supplies
Description Voltage Limitations (8- ΩLoad) Current Recommendations
System power supply 5 V 1 AOutput power stage supply 8–24 V 4 A
(1)
(1)
The rated current corresponds to two channels, full scale.
TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC6 SLOU223A – December 2008 – Revised January 2009Submit Documentation Feedback

2.1.3 Loudspeaker Connectors
2.1.4 USB Interface
2.1.5 Digital Audio Interface SPDIF (RCA/OPTO)
2.1.6 ADC Interface
2.1.7 Board Power-Up General Guidelines
www.ti.com Installation
CAUTION
All speaker outputs are biased at Vcc/2 and may not be connected to ground(e.g., through an oscilloscope ground).
Loudspeaker connections vary by device setup. Consult the quick-start guide ()Section 4 for more details.However, the following is a general guideline:
When connecting a speaker in BTL mode, connect the speaker’s two terminals (L+ and L-) and (R+ andR-) across two outputs on the TAS5705EVM2.
The TAS5705 registers are accessed through I
2
C™ bus lines SDA and SCL. The USB circuit and USBconnector on the MC57xxPSIA board facilitates the connection between a host computer and the device.The EVM USB circuit is powered by the 5-V USB line of the host PC and is independent of the powersupplies available on the board. The USB device that is used is a TAS1020B from Texas Instruments.
The Digital Audio Interface accepts digital audio data using the I
2
S protocol. See the TAS5705 data sheet(SLOS549 ) for more information.
The RCA connector and the OPTO connector are the two SPDIF interfaces on the MC57xxPSIA board.The switch S3 toggles between the OPTO and RCA connector to accommodate the signal source. Whenthe RCA cable or optical cable is connected and the signal source is powered up, verify that the SPDIFlock indicator (blue LED5) illuminates, confirming that a viable signal is available to the device. Install ajumper on JP4 across the middle pin and the pin marked SPDIF to connect the digital source toSDIN1.Install jumper on JP5 to connect the digital source to SDIN2.
For detailed information on how the data and clocks are provided to the TAS5705, see the schematicappearing at the end of this document and the DIR9001 device data sheet (SLES198 ).
In the absence of a digital signal source, the PCM1808 ADC can be used to convert an analog audiosignal to a digital signal to the TAS5705. The DIR9001 still provides clock signals to the ADC in thisprocess. The DIR9001 oscillator frequency (Y2) determines the sampling frequency in the absence of adigital signal. If the OSC frequency is 24 MHz, the sampling frequency is set at 96 kHz; if the OSC is setat 12 MHz, the sampling frequency defaults to 48 kHz when no signal is on the SPDIF input terminals. A12-MHz crystal is installed on the MC57xxPSIA board. The ADC is an additional feature of this board toprovide flexibility in sourcing an audio signal to the TAS5705. Review the PCM1808 data sheet (SLES177 )for a detailed description of the ADC on this EVM. Install the jumper on JP4 across the middle pin and thepin marked ADC to select ADC as the source for SDIN1.Do the same for JP5 to select the ADC as thesource for SDIN2.
Connect the MC-57xx and the TAS5705EVM2boards by locating pin 1 on each board, indicated by a smallwhite triangle. The MC-57xx plugs down onto the TAS5705EVM2 board (i.e., the TAS5705EVM2 boardfits underneath the MC57xxPSIA board). Pin 1 on each board must be connected to each other.
Install the EVM software on the PC before powering up the board. After connecting the loudspeakers orother loads, power supplies, and the data line, power up the 5-V power supply first; then power up thePVDD power supply. It is recommended initially to set the PVDD level to 10 V, then ramp it up to 20 V toverify cable connections.
SLOU223A – December 2008 – Revised January 2009 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC 7Submit Documentation Feedback

2.2 Software Installation
Installation www.ti.com
Download the TAS570X GDE from the TI Web site, which always has the latest release of the GUI. Checkversions for any updates to the GUI on the TI Web site .
Execute the GUI install program, Setup_TAS570X_version_number.exe
Once the program is installed, the program group and shortcut icon is created in Start →Program →Texas Instruments Inc →TAS570X GDE.
THE GUI come ups as shown in Figure 5 .
Select the appropriate tab; in this case, select the TAS5705/TAS5706 tab.
It has two subwindows. One shows the Process Flow window. From the Process Flow window, each ofthe signal processing function tools can be selected by clicking on it. The Biquad GUI and the DRC GUIcan be opened by using the right button of the mouse. This window also shows input select, Mode select,Channel, and Master Volume. All functions are shown in the order that they are in the device.
The other subwindow, Properties window, has the properties where a user can update by selecting fromthe available options. The properties that are available depends on the device selected. From the mainwindow, the user must set three properties before connecting to the EVM.
Select the device, Enable/Disable auto bank switch function and set the sample rate. The TAS5705automatically detects sample rates. The setting here is simply to synchronize the GUI and the device.
Figure 5. Graphical User Interface Initial Window
TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC8 SLOU223A – December 2008 – Revised January 2009Submit Documentation Feedback

3 Using the EVM Software
3.1 Connect the GUI to the EVM
3.2 I2C Memory Tool
www.ti.com Using the EVM Software
Once the properties window selections have been made, go to the menu Target →Connect.
This sends the initialization commands to the device. Master volume is in mute. Select the master volumefunction. Type the required volume in the properties window. For TAS5705, type –12 dB. For TAS5705,type 0 dB. The difference is due the power stage gain in both devices. At this time, audio, if connectedproperly, plays through the device. Check All channel shutdown button. It must be un-checked. When theConnect command is issued, if an error appears that indicates a USB problem. Check the connectionsand press USB RESET button on the controller board. Then disconnect and re-connect from the Targetmenu.
This tool can be opened from GDE (Tools →I2C Memory Tool) or independent of GDE from Start →Program →Texas Instruments Inc →Memory Tool
Select I2C as show in Figure 6 .
Figure 6. Memory Tool Window
I2C registers can be written or read using this tool. I2C command file can be sent by selecting thecommand file and Execute command.
SLOU223A – December 2008 – Revised January 2009 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC 9Submit Documentation Feedback

3.3 Volume Function
3.4 Biquad GUI
Using the EVM Software www.ti.com
Individual and Master volume can be selected, and the required volume value can be entered by typing onthe property Window after selecting the function with the mouse (see Figure 7 ).
Figure 7. Volume Control
Using the right button of mouse, select Biquad GUI (Figure 8 ).
Figure 8. Selecting Biquad GUI
10 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC SLOU223A – December 2008 – Revised January 2009Submit Documentation Feedback

3.5 DRC GUI
www.ti.com Using the EVM Software
Figure 9. Filter Creation Tool Window
Check mark selects the Biquad. If not selected, the Biquad is in ALL PASS Mode.
Frequency response for the current settings can be viewed and adjusted in Frequency ResponseWindow Tab (Figure 9 ). Individual Biquad Gains must be within ±12 db.
Apply from the filter data window sends all the three banks of coefficients (providing auto bank isenabled).
Clicking on the function selects DRC GUI (Figure 10 ). Click on the DRC function, and check to see if DRCis enabled in the property window.
Figure 10. DRC Parameters
SLOU223A – December 2008 – Revised January 2009 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC 11Submit Documentation Feedback

Using the EVM Software www.ti.com
Next, using the right button of the mouse, select Activate DRC GUI (Figure 11 ).
Figure 11. Activating the DRC GUI
Set the compression ratio to a value between 1 and 50.
The offset has a range of ±6 dB. A value of 0 is illegal. If no offset is required, set the offset to 0. Offset isgenerally not required in a DRC application because is just provides a gain.
Threshold is selected with a value of 0 to –72 dB.
Figure 12. Time Constants Button
Time constants: Select the time constants to adjust the energy, attack, and decay filters (Figure 12 ).
TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC12 SLOU223A – December 2008 – Revised January 2009Submit Documentation Feedback

3.6 Disable Biquads
4 TAS5705EVM2 Quick-Start Setup Guide
www.ti.com TAS5705EVM2 Quick-Start Setup Guide
The Biquads on channel1 and channel2 can be disabled from the GUI (Figure 13 ). Ensure that this isproperly enabled before using Biquad GUI. Otherwise, changes on the GUI do not appear on the deviceoutput because the biquads (channel1 and channel2) are bypassed.
Figure 13. Disabling the Biquads
This section discusses the five most common configurations of the TAS5705EVM2, and how to enable theheadphone mode. For faster setup, you can load the I
2
C initialization script of each configuration from theCD. Directions for loading initialization scripts follow this section.
Common Configurations: Corresponding I
2
C script
1. 2×BTL BD Mode TAS5705_BD_2xBTL.ini2. 2×BTL AD Mode TAS5705_AD_2XBTL.ini
See Section 7 for details on how to set up each of these modes.
Note:
AD : AD Modulation
BD : BD Modulation
BTL : Bridge-Tied Load
SLOU223A – December 2008 – Revised January 2009 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC 13Submit Documentation Feedback

5 Jumpers and Control Utilities on MC57xxPSIA board
5.1 RCA/OPTICAL Jumpers
5.2 Switches
5.3 LED Indicators
Jumpers and Control Utilities on MC57xxPSIA board www.ti.com
Select the jumper to reflect the source whether it is RCA or OPTICAL.
Reset is an active-low function. Pressing the master reset switch (S2) resets the TAS5705 resets device,USB RESET (S1) reset the USB bus, PDNZ(S4) power down TAS5705 and MUTE(S5) mutes (volumemute) TAS5705.
LED1 : USB Power connector installed at J1
LED2 : 3.3V Power is valid
LED3: RCA connection made
LED4: Optical connection made
LED5: SPDIF signal locked
LED6: FAULT (Not used with TAS5705EVM2)
LED7: PDN switch (S4) is depressed
LED8: MUTE switch (S5) is depressed
TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC14 SLOU223A – December 2008 – Revised January 2009Submit Documentation Feedback

6 Board Layouts, Bill of Materials, and Schematic
6.1 TAS5705EVM2 and MC57xxPSIA Board Layouts
www.ti.com Board Layouts, Bill of Materials, and Schematic
Figure 14. TAS5705EVM2 Top Assembly
Figure 15. MC57xxPSIA Top Assembly
SLOU223A – December 2008 – Revised January 2009 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC 15Submit Documentation Feedback

6.2 Bill of Materials
Board Layouts, Bill of Materials, and Schematic www.ti.com
Table 2. Bill of Materials for TAS5705EVM2
TI SEMICONDUCTORS
Item Description Ref Des Qty MFG MFG:Part No. Vendor Vendor: Part No. Alt. Part No.
1 Modulator/HBRIDGE U1 1 Texas TAS5705PAP Texas TAS5705PAP No Alt. Part NumTQFP64-PAP Instruments Instruments
CAPACITORS
2 CAP 4700PFD 50V CERM 0603 X7R C10, C13 2 Panasonic ECJ-1VB1H472K Digi-Key PCC1780TR PCC1780CT
3 CAP 0.01UFD 25V CERM 0603 X7R C35-C38 4 Panasonic ECJ-1VB1E103K Digi-Key PCC1763TR PCC1763CT
4 CAP 0.33UFD 50V CERM 0603 X7R C16-C19 4 Panasonic ECJ-1VB1H333K Digi-Key PCC2284TR PCC2284CT
5 CAP 0.047UFD 16V CERM 0603 X7R C9, C11 2 Panasonic ECJ-1VB1C473K Digi-Key PCC1758TR PCC1758CT
6 CAP 0.1UFD 16V CERM 0603 X7R C2, C4, C6, C8, 5 Panasonic ECJ-1VB1C104K Digi-Key PCC1762TR PCC1762CTC15
7 CAP 0.1UFD 50V CERM 0603 X7R C3, C14, C24, 4 Murata GRM188R71H104KA93D Digi-Key 490-1519-2 490-1519-1C32
8 CAP 1.0UFD 25V CERM 0603 X5R ROHS C21, C39 2 Taiyo Yuden TMK107BJ105KA-T Digi-Key 587-1248-2 587-1248-1
9 CAP 4.7UFD 6.3V CERM 0603 X5R C5 1 TDK Corp. C1608X5R0J475M Digi-Key 445-1417-2 445-1417-1
10 CAP 1.0UFD 63V METAL POLYESTER C22, C23, C25, 4 EPCOS B32529C105J Digi-Key 495-1119 No Alt. Part NumFILM MKT C26
11 CAP 10UFD 16V ALUM ELEC SMD VSA C1, C7 2 Panasonic ECE-V1CS100SR Digi-Key PCE3061TR PCE3061CT
12 CAP 220UFD 35V ALUM ELEC M-Series C20, C30 2 Panasonic ECA-1VM221BJ6 Digi-Key P10419TB No Alt. Part Num
RESISTORS
13 RES 0.0 Ω1/16W 5% SMD 0603 R6 1 Panasonic ERJ-3GEY0R00V Digi-Key P0.0GTR P0.0GCT
14 RES 3.3 Ω1/16W 5% SMD 0603 R7, R12, R13, 4 Yageo 9C06031A3R30JLHFT Digi-Key 311-3.3GTR 311-3.3GCTR14
15 RES 470 Ω1/10W 5% SMD 0603 R5, R8 2 Panasonic ERJ-3GEYJ471V Digi-Key P470GTR P470GCT
16 RES 10 k Ω1/16W 5% SMD 0603 R1, R3, R4 3 Panasonic 9C06031A1002JLHFT Digi-Key 311-10KGTR 311-10KGCT
17 RES 18.2 k Ω1/10W 1% SMD 0603 R2 1 Yageo 9C06031A1822FKHFT Digi-Key 311-18.2KHTR 311-18.2KHCT
18 RES 22.1 k Ω1/16W 1% SMD 0603 R9 1 Panasonic ERJ-3EKF2212V Digi-Key P22.1KHTR P22.1KHCT
INDUCTORS
19 INDUCTOR, SERIES 11RHBP, 22UH L1–L4 4 Toko A7503AY-220M Toko America A7503AY-220M No Alt. Part NumAmerica
HEADERS
20 Header, 1 Pin Male, PCB Straight Gold LM, LP, RM, RP 4 Sullins PBC01SAAN Digi-Key S1011E-01 No Alt. Part NumROHS
21 Header, 2X9 Pin Male, PCB Straight Gold J1 1 Sullins PBC02DAAN Digi-Key S2011E-09 No Alt. Part NumROHS
STANDOFFS AND HARDWARE
22 Standoff 4–40 Threaded M/F 0.50 in. HW1–HW4 4 Keystone 8401 Digi-Key 8401K No Alt. Part NumALUM-HEX Electronics
23 Hex Nut, 4-40, Zinc/Steel HW1–HW4 4 Building HNZ440 Digi-Key H216 No Alt. Part NumFasteners
TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC16 SLOU223A – December 2008 – Revised January 2009Submit Documentation Feedback

6.3 Schematic
7 Quick-Start Setup Guide
www.ti.com Quick-Start Setup Guide
The schematic for TAS5705EVM2 and MC57xxPSIA are located at the end of this document.
This section discusses the five most common configurations of the TAS5705EVM2, and how to enable theHeadphone mode.
Common Configurations: Corresponding I
2
C Script
1. 2×BTL BD TAS5705_BD_2xBTL.ini2. 2×BTL AD Mode TAS5705_AD_2xBTL.ini
Before you begin:•Follow all steps in the EVM Installation section (Section 2.1 ).•Click on GUI background, and in the Properties sidebar, set Device to TAS5705:
SLOU223A – December 2008 – Revised January 2009 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC 17Submit Documentation Feedback

7.1 2 X BTL BD (Default: BD mode)
OUT A
OUT B
OUT C
OUT D
Left
Right
R-
R+
L-
L+
Quick-Start Setup Guide www.ti.com
1. Set up the hardware as shown in the following illustration. Ensure that all the four jumpers (JP1-JP4)are plugged in. This provides you with BTL output configurations for both left and right channels.
2. Go to Appendix A of this document, and save the script as NAME.ini. ( OR use the correspondingscript from the CD or TI Web site).The format for the config file can be .ini or .CFG3. Connect to the device: Target > Connect.
4. Go to Tools > I
2
C Memory Tools.
18 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC SLOU223A – December 2008 – Revised January 2009Submit Documentation Feedback

www.ti.com Quick-Start Setup Guide
5. Click on the I
2
Ctab, and upload the saved configuration script NAME.ini into the I
2
C command Filewindow. Click Execute.
6. Finally uncheck the shutdown box to bring the device out of Shutdown mode, and adjust the MasterVolume as desired.
SLOU223A – December 2008 – Revised January 2009 TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC 19Submit Documentation Feedback

of
Filename:
Mod: PCB Rev: Sheet
Save Date:
CX
Schematic Rev:
Design Team:
Drawn By:
TI Print Date
PROJECT:
of
Filename:
Mod: PCB Rev: Sheet
Save Date:
CX
Schematic Rev:
Design Team:
Drawn By:
TI Print Date
PROJECT:
IN
IN
*
*
*
#
#
#
*#
NC NC 1
LDN
PGND
PVDD R10
8V
>8V
PVDD
OUT
R10
#
#
JULY 25, 2008
OUT
IN
OUT
IN
Fri Jul 25, 2008
*
8V
>8V OUT
3NC
PGND
FROM MC-57xx
MODE
*AD
C12
IN
MODE STUFF OPTION
#BDOUT
STUFF OPTION
STRAP
CAPS
IN#BD
OUT*AD
OUTPUT
DECOUPLING
BOOT
STUFF OPTION
MODE C22/23/25/26
TAS5705 EVALUATION BOARD
C27/28 C29/31/33/34
TAS5705EVM2.SCH
MODE STUFF OPTION
TAS5705
TAS5705PAP
U1
YONG GWAN KIM, SREENATH UNNIKRISHNAN, JOSEY ANGILI