1
SBVU035–October 2017
Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated
Universal Low-Dropout (LDO) Linear Voltage Regulator MultiPkgLDOEVM-
823 Evaluation Module
User's Guide
SBVU035–October 2017
Universal Low-Dropout (LDO) Linear Voltage Regulator
MultiPkgLDOEVM-823 Evaluation Module
This user’s guide describes the operational use of the MultiPkgLDOEVM-823 evaluation module (EVM) as
a reference design for engineering demonstration and evaluation of Texas Instruments low-dropout (LDO)
linear regulators, in DRB, DRV, DQN, and DBV packages. Included in this user’s guide are setup and
operating instructions, layout guidelines, a printed circuit board (PCB) layout, a schematic diagram, and a
bill of materials (BOM).
Throughout this document, the terms demonstration kit,evaluation board, and evaluation module are
synonymous with the MultiPkgLDOEVM-823.
Contents
1 Introduction ................................................................................................................... 3
1.1 Before You Begin................................................................................................... 3
2 Supported Pinouts........................................................................................................... 3
3 DRB Package ................................................................................................................ 4
3.1 Input/Output Connectors and Jumper Descriptions............................................................ 4
3.2 Component Descriptions........................................................................................... 4
3.3 EVM Setup........................................................................................................... 6
3.4 Operation ............................................................................................................ 6
3.5 Schematic............................................................................................................ 6
4 DRV Package ................................................................................................................ 7
4.1 Input/Output Connectors and Jumper Descriptions............................................................ 7
4.2 Component Descriptions........................................................................................... 7
4.3 EVM Setup........................................................................................................... 9
4.4 Operation ............................................................................................................ 9
4.5 Schematic............................................................................................................ 9
5 DQN Package .............................................................................................................. 10
5.1 Input/Output Connectors and Jumper Descriptions........................................................... 10
5.2 Component Descriptions ......................................................................................... 10
5.3 EVM Setup......................................................................................................... 11
