Thane Fitness BikeNook User manual

Assembly Instructions
bicycle stand

2 3
STEP 1
Connect L Piece to Cross Bar
THANK YOU
WHAT YOU GET
Connect the L-Piece to the Cross Bar by
aligning the arrow on the L Piece to
the arrow on the Cross Bar so that both
arrows are facing in the same direction
Insert the Flathead Bolt into the L-Piece
and tighten using the Allen Key
Turn the Cross Bar over so that it is
resting on the Feet. Insert the Long Bolt
into the bottom hole of the L-Piece
Place a washer, followed by a nut, on the
protruding end of the Long Bolt. Secure
the Nut to the Long Bolt by using the
Socket wrench and Allen Key
Parts Required:
1. Cross Bar
2. L-Piece
3. Foot
11. Socket Wrench
12. Allen Key
13. Washers
14. Nuts
15. Long Bolt
17. Flathead Bolt
2
2
1
1
1115
15
17
17
13
13
3
3
3
3
14
14
12
1. Cross Bar
2. L-Piece
3. Foot
4. Track
5. Ramp
6. Diamond Bracket
7. Upright
8. Adjustable Upright
9. V-Slot
10. Adjustment Knob
11. Socket Wrench
12. Allen Key
13. Washers
14. Nuts
15. Long Bolt
16. Bolts
17. Flathead Bolt
1
2
3
4
5
6
7
89
10
11 1213
14
1617 15
Congratulations on your choice of the Bike Nook™ bicycle stand, the brilliant
new way to store your bike away, quickly and easily.
The Bike Nook™ bicycle stand is as easy as 1-2-3 and saves up to 3 feet of
valuable floor space, and the best part is it easily adjusts to any size or type of
bike and any size of wheel. Big or small Bike Nook™ fits them all!
Please use these easy to follow instructions for tips on how to set up your Bike
Nook™ and use it for different sizes of bikes.
We hope you enjoy the quick and easy new way to store your bicycle, and all of
the free space you get back!
Thane Direct and its affiliated companies assume no liability for personal injury
or property damage resulting from the misuse of the Bike Nook™ bicycle stand
including the failure to comply with the instructions contained in this User’s Guide.

4 5
STEP 3
Connect the Upright to the Cross Bar
Place the Upright in- between the gap
between the Diamond Bracket and the
L-Piece
Ensure the holes of the Diamond Bracket,
the Upright and the L-Piece are aligned
Place Bolts into each of the remaining
two holes in the L-Piece
Place a Nut and Washer on the protruding
Bolt end and tighten using the Allen Key
and Socket Wrench
The Upright should now be securely
connected to the Cross Bar
11
2
16
16
13
13
14
14
12
7. Upright
11. Socket Wrench
12. Allen Key
13. Washers
14. Nuts
16. Bolts
7
7
STEP 2
Connect the Track to the Cross Bar
Connect the Track to the Cross Bar by
placing the Track on top of the L-Piece.
Align the holes on the Track with the
holes on the L-Piece
Place the Diamond Bracket on top of the
Track so that the holes in the Diamond
Bracket are aligned with the holes in the
Track and the holes in the L-Bracket
Place a Bolt from the underside of the L
Piece through the corresponding holes in
the L-Piece, Track and Diamond Bracket,
so that the bolt end protrudes through
the Diamond Bracket. Place a Washer
and Nut on the protruding section of the
Bolt and tighten using the Allen Key and
Socket Wrench. Repeat for second hole.
The Track should now be secured to the
Cross Bar by 2 bolts.
Note: The Diamond Bracket and
L-Bracket should be parallel to one
another with a gap between them
4. Track
5. Ramp
6. Diamond Bracket
11. Socket Wrench
12. Allen Key
13. Washers
14. Nuts
16. Bolts
4
4
6
6
11
16
5
5
13
13
14
16
14
12
GAP

6 7
STORING YOUR BICYCLE
Position the back wheel of the bicycle
facing the Bike Nook™
Roll the back wheel of the bicycle over
the Ramp onto the Track until the wheel
engages with the Upright.
This is the horizontal storage position
To store the bicycle in the vertical
position, lift the front wheel upwards
Lower the seat holder onto the “V” of the
Adjustment Upright.
Important: Ensure that the bicycle rests
securely into the V-Slot and is stable. If
not, return the bicycle to the horizontal
position and lower (or raise) the
Adjustment Upright
Use the Strap to secure the front wheel
in place
When storing the bicycle in
the vertical position, ensure
that the V-Slot is at a height
so that the weight (and
centre of gravity) of the
bicycle “leans” towards the
Upright – not towards the Ramp
V-Slot
V-Slot
Upright
Ramp
STEP 4
Connect the Adjustable Upright to the Upright
Align the Adjustable Upright with the
Upright so that the Adjustable Upright is
at the desired height in terms of the size
of your bicycle.
Place the Adjustment Knob through the
holes in the Adjustable Upright.
Secure Adjustment Knob in place .
8. Adjustable Upright
9. V-Slot
10. Adjustment Knob
8
8
7
9
9
10
10

Distributed by:
Thane USA, Inc., Canton OH 44718, U.S.A.
Thane Canada Inc., Mississauga ON L4W 5M6, Canada
Thane Direct UK Ltd, London EC1Y 8NA, UK
Danoz Direct Pty Ltd, Alexandria NSW 2015, Australia
Operadora Ainoa, S.A.P.I. DE C.V., Ejercito Nacional 423-1 C.P 11520, México. D.F.
TVINS. 211 18 Malmö, Sweden
© 2017 Thane IP Limited.
MADE IN CHINA
“Thane”, “Bike Nook”, and related logos and variations are trademarks or registered trademarks,
in Canada and/or other countries, of Thane IP Limited and/or its affiliated companies.
Bike Nook MNL ENG R0 170104