The Land of Nod Walden User manual

WARNING: Failure to follow these warnings and
instructions could result in serious injury or death
!
WALDEN
TWIN-OVER-FULL BUNK BED
Follow the information and warnings on bunk end structure and carton. Do not remove
these labels.
Always use the recommended size mattress to help prevent the likelihood of entrap-
ment or falls.
• Surface of mattress must be at least 5" (127 mm) below the upper edge of guardrails.
The maximum thickness of the bunk mattress is 10”
• Use only mattress which is 74” – 75” long and 37 1/2” – 38 1/2” wide on upper
bunk.
• Use only mattress which is 74” – 75” long and 53” – 54” wide on lower bunk.
• Never allow a child under 6 years on the upper bunk.
• Prohibit more than one person on upper bunk.
• Periodically check to ensure guardrail, ladder and other components are in their
proper position, free from damage, and that all connectors are tight.
• Do not allow horseplay on or under the bed and Prohibit jumping on the bed.
• Always use the ladder for entering and leaving the upper bunk.
• Do not use substitute parts. Contact the Land of Nod for replacement parts at
800.933.9904
• Use of a night light may provide added safety precaution for a child using the upper
bunk.
• Always use the guardrails on both sides of the upper bunk. If the bunk bed will be
placed next to the wall, the guardrail that runs the full length of the bed should be
placed against the wall to prevent entrapment between bed and wall.
• The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD!
• Never attach or hang items to any part of the bunk that are not designed for use with
the bed; for example, but not limited to, hooks, belts and jump ropes.
• Keep these instructions for future reference.

WARNING: Adult Assembly Required
!
Made in Vietnam - r06 Page 1 of 4
TOOLS REQUIRED
Thank you for purchasing the Walden Twin-Over-Full
Bunk Bed.This page lists all the contents included in
the box. Please take the time to identify the hardware as
well as the individual components to this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are required to safely assemble this product.
Customer Service 800.933.9904 | Latest instructions available on www.landofnod.com
phillips head screwdriver allen wrench (included)
(We recommend the use of hand tools instead of power tools)
12 - large
screws
3 - allen
bolts
36 - phillips
bolts
39- flat
washers
39- spring
washers
HARDWARE
Missing hardware? Please call 800.933.9904 for replacements.
NOTE: Contains small parts. Keep away from small children.
4 - small
screws
4 - metal
dowels
COMPONENTS
2 - full headboard
and footboard
4 - side rails
(2 left, 2 right)
1 - full size
slat assembly
2 - twin headboard
and footboard
1 - center
rail
1 - twin size
slat assembly
1 - small
guardrail 1 - large
guardrail
1 - ladder
WALDEN
TWIN-OVER-FULL BUNK BED

Made in Vietnam - r06 Page 2 of 4
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
12
Fit center support into corresponding notches of
headboard and footboard as shown. From
underneath, attach with 2 small screws. Secure,
but do not over tighten, screws with a screwdriver.
NOTE: Do not over
tighten the screws
Attach full slat assembly onto side rails of bed
assembly as shown with 6 large screws. Make
sure straps of slat assembly are facing up as
shown. Secure, but do not over tighten, screws
with a screwdriver.
Full bed assembly is now complete.
34
TWIN BED ASSEMBLY
FULL BED ASSEMBLY
With the assistance of another adult, attach each
bracket of left and right side rails to full
headboard and footboard with 3 phillips bolts, 3
spring washers and 3 flat washers. Secure, but
do not over tighten, bolts with a phillips head
screwdriver.
NOTE: Do not over
tighten the bolts
NOTE: Make sure wood
blocks on side rails fit
between first and last
slats as shown.
With the assistance of another adult, attach each
bracket of left and right side rails to twin
headboard and footboard with 3 phillips bolts, 3
spring washers and 3 flat washers.
WALDEN
TWIN-OVER-FULL BUNK BED

WALDEN
TWIN-OVER-FULL BUNK BED
TWIN-OVER-FULL
BED ASSEMBLY
Made in Vietnam - r06 Page 3 of 4
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
5
A. Insert 4 metal dowels into full bed assembly as
shown.
B. With assistance of another adult, fit holes of twin
bed assembly onto corresponding dowels of full
bed assembly as shown.
Determine desired orientation of bunk beds. Attach
small and large guard rails to twin bed assembly
with 12 phillips bolts, 12 spring washers, 12 flat
washers as shown, using a screwdriver.
8
6
7
small
guard rail
large
guard rail
A
B
Attach twin slat assembly onto side rails of bed
assembly with 6 large screws. Make sure straps of
slat assembly are facing up as shown.
Twin bed assembly is now complete.
Secure small and large guard rails to twin
headboard and footboard with 3 allen bolts, 3
spring washers and 3 flat washers, using an
allen wrench.
NOTE: Make sure wood
blocks on side rails fit
between first and last
slats as shown.

Made in Vietnam - r06 Page 4 of 4
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
9
Fit hooks of ladder over twin bed assembly as
shown. Make sure holes of ladder are aligned with
corresponding holes of bed. At this point, secure
ladder with 2 small screws, using a screwdriver.
Assembly is now complete.
WALDEN
TWIN-OVER-FULL BUNK BED
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. Do not use furniture wax
or polish as the unit is finished with a protective
clear lacquer.