The Land of Nod Oak Park Hutch User manual

OAK PARK
HUTCH
WARNING: Adult Assembly Required
!
Made in Vietnam - r05 Page 1 of 5
ASSEMBLY HARDWARE
COMPONENTS
TOOLS REQUIRED
Thank you for purchasing the Oak Park Hutch.This
page lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components to this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
Customer Service 800.933.9904 | Latest instructions available on www.landofnod.com
1
A) Insert 4 wood dowels into top panel as shown.
B) With the assistance of another adult, carefully
place top panel onto clean, padded surface. Insert
2 cam screws into top panel as shown. Secure,
but do not over tighten, cam screws with a
phillips head screwdriver.
C) Insert 4 cams into top panel as shown. Make
sure arrows on each cam points toward nearest
edge with holes.
26 - wood
dowels
4 - flat
washers
4 - spring
washers
1 - top panel
4 - bolts
Missing hardware? Please call 800.933.9904 for replacements.
NOTE: Contains small parts. Keep away from small children.
1 - shelf
2 - side panels
(1 left, 1 right)
1 - bulletin
board
2 - partitions
(1 left, 1 right)
1 - back
panel
6 - small
screws
4 - large
screws
17 - cam
screws
17 - cams 2 - connecting
brackets
NOTE: Make sure arrow
on cam points toward
nearest edge with holes
B
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
top panel
A
C
A
B
C
NOTE: Do not over
tighten the cam
screws

OAK PARK
HUTCH
Made in Vietnam - r05 Page 2 of 5
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
4
23
5
Insert 2 wood dowels and 1 cam into each
partition as shown.
Insert 7 cams into bulletin board as shown.
Insert 7 wood dowels and 6 cam screws into left
and right side panels.
Insert 4 wood dowels, 3 cam screws and 4 cams
into shelf as shown.
shelf
left
partition
right
partition
bulletin board
left side
panel
right side
panel

OAK PARK
HUTCH
Made in Vietnam - r05 Page 3 of 5
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
6
8
Fit dowels of left and right side partitions into
corresponding holes of shelf as shown. Secure
with 4 bolts, 4 spring washers and 4 flat washers
using a screwdriver. Do not over tighten the bolts.
7
9
shelf
NOTE: Do not over
tighten the bolts
Fit dowels of top panel into corresponding holes of
left and right partition as shown. With a
screwdriver, turn each cam clockwise until it
securely engages each cam screw.
top panel
left
partition
right
partition
With the assistance of another adult, fit dowels of
assembled unit into corresponding holes of bulletin
board as shown. Secure all cams.
bulletin
board
With the assistance of another adult, fit dowels of
left and right side panels into corresponding holes
of assembled unit as shown. Secure all cams.
left side
panel
right side
panel

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
CLEANING AND CARE
Made in Vietnam - r05 Page 4 of 5
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
10
11
With the assistance of another adult, position unit
upright. Slide back panel into corresponding
grooves of assembled unit as shown. Secure, but
do not over tighten, with 4 large screws using a
screwdriver.
NOTE: Do not
over tighten the
screws
back panel
desk
(sold separately)
With the assistance of another adult, place hutch
onto desk (sold separately) as shown. Attach 2
connecting brackets to desk and hutch assembly
with 3 small screws per bracket as shown, using
a screwdriver.
Assembly is now complete.
OAK PARK
HUTCH

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is
essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach 2 mounting brackets to top of unit with 2 small screws per bracket as shown. Secure, but do not over tighten,
with a phillips head screwdriver.
B) Determine the final location of unit. Mark each position on the wall, approximately 2" below the mounting bracket
mounted to the back of the unit.
C) Drill 4 holes into marked positions on the wall and into a wall stud. If the wall stud is not available, drill a hole in the wall
that is slightly smaller in diameter than the anchor. Gently tap 4 plastic anchors until the flange of each anchor is flush with
the wall.
D) Attach 2 mounting brackets to the wall with 2 large screws per bracket as shown. Using a screwdriver, make sure the
screws are secured through the mounting bracket and into the plastic anchor in the wall.
E) With the assistance of another adutl, position the unit so the mounting brackets on the back edge are aligned with the
mounting brackets on the wall.
F) Attach 2 wall straps to corresponding mounting brackets as shown. Lace one end of the wall strap through both
brackets and into the other end of the strap. Pull tightly on the wall strap to secure.
Wall mounting assembly is now complete.
Serious or fatal crushing injuries can occur from furniture
tip over. Use of tip-over restraints may only reduce, but
not eliminate, the risk of tip-over. To help prevent tip-over,
install tip restraint per instructions below.
WARNING
!
4 - small
screws
4 - large
screws
4 - plastic
anchors
4 - mounting
brackets
Missing hardware? Please call 800.933.9904
for replacements. NOTE: Contains small
parts. Keep away from small children.
MOUNTING HARDWARE
2 - wall straps
TOOLS REQUIRED
WALL MOUNTING ASSEMBLY
power drill
(for pilot holes only)
phillips head screwdriver
Made in Vietnam - r05 Page 5 of 5
Customer Service 800.933.9904 | Latest instructions available on www.landofnod.com
A
C
D
small
screw
mounting
bracket
plastic
anchor
large
screw
wall
strap
mounting
bracket
OAK PARK
HUTCH