The Oak Bed Store CHESTER BED 3FT User manual

3FT CHESTER BED ASSEMBLY INSTRUCTIONS
Page 1 of 10
Thank you for purchasing from The Oak Bed Store. As an independent family run company, customers
such as yourself really make a big difference and we sincerely appreciate it.
We hope you are delighted with your purchase, however if you have any further queries or concerns,
please don't hesitate to contact us by;
. Email at he[email protected]
. Telephone on 02393 552 550
. Live Chat via our website
Please read the instructions carefully before assembling or use to ensure a safe
and satisfactory operation of this product.
Please note:
1. This product is heavy, it should be assembled as near as possible to the point of use.
2. Please do not drag the bed frame, always lift and reposition with 2 people to avoid personal injury
as well as damage to the product.
3. Please do not discard any of the packaging until you have checked that you have all the parts and
the pack of fittings.
4. DO NOT use any power tools as this may damage the frame and will invalidate any claim.
5. Periodically check all screws & fixings to ensure they are secure.
6. You will require a screwdriver and small mallet (not provided).
7. Please do not jump on this bed frame.
8. The fittings pack contains small parts, which should be kept away from children.
In the unlikely event that this product has missing or damaged parts, please call 02393 552 550 to obtain
replacements.

Page 2 of 10
PART LIST
PART DESCRIPTION BOX QTY
1Headboard Frame
Left Wooden Post
Right Wooden Post
Footboard Frame
Side Rail - Left & Right
Back Storage Panel
Base Panel
Center Storage Panel
Left Hydraulic Base Support
Hydraulic Pump
Back Side Bar
Front Side Bar
End Bar Left
End Bar Right
Center Bar
Middle Bar
Right Hydraulic Base Support
Wood Slat
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
1
1
1
2
1
4
1
1
1
2
1
1
1
1
1
2
14
1/3
1/3
1/3
2/3
3/3
2/3
1/3
2/3
2/3
2/3
2/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3

Page 3 of 10
HARDWARE LIST (Found in box 3)
PART DESCRIPTION BOX QTY
I
H
G
F
E
D
C
B
M6 x 90mm JCBC Bolt + Barrel Nut
ML-CB (Metal Corner Support)
Single End Plastic Cap
M8 x 45mm RH Bolt c/w Hex Nut, Spribg Washer &
Flat Washer
M6 x 40mm JCBC Bolt
Base Handle
M8 x 20mm JBCB Bolt
M8 x 15mm JCBC Bolt
M8 x 25mm JCBC Bolt
A
R
Q
P
O
N
M
L
K
J
M8 Allen Key
M8 x 30mm Wood Dowel
M6 Allen Key
Washer Bracket
Flat Bracket
M6 x 45mm JCBC Bolt
M6 x 30mm JCBC Bolt
Mini Fix
Wood Button
SM12.8 Spanner
TM14 Spanner
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
3/3
12
8
4
2
4
28
6
8
3
8
8
1
4
8
4
1
1
4
1
16
** You will also need a screw driver and small mallet (not provied).

Page 4 of 10
Step 1 : Attach the headboard frame (1) and back storage panel (6) to the left wooden post (2) and right
wooden post (3). Secure the headboard frame using hardware parts I, J and K, then secure the back
storage panel with hardware parts J and L.
Step 2 : Join together the left side rail and right side rail (5) with the centre storage panels (8) using
hardware parts J and L.
2
6
1
3
L
J
J
I
K
K
I
8
5
5
L
J
L

Page 5 of 10
Step 3 : Attach the headboard frame (1) and footboard (4) to the side rails using hardware part A.
Step 4: Insert the base panel (7) to the position.
4
A
7

Page 6 of 10
Step 5 : Firstly, fix the hydraulic pump to each hydraulic base support as shown in diagram 5.1
Next ensure your hydraulic opening side, locate your hydraulic base support through the JCBC holes
L1, L2, L3 & L4 or R1, R2, R3 & R4 at the headboard and footboard as shown in diagram 5.2 .
L3 L4
L4
L1 L2
L2 L3
L1 R3
R2
R1
R1
R4
R4
R3
R2
11
9/10 11
11
10 9
9
10
CC
OPTION 1 (LEFT OPENING) OPTION 2 (RIGHT OPENING)
Hydraulic Pump Base Support installation for OPTION 1
5.2 Hydraulic Base Support installation for OPTION 2
5.2
Make sure to fix bolts C at round end hole first (L1/R1) as shown in diagram 5.3 and do not
tighten yet. Filnally, fix all bolts and tighten all bolts as shown in diagram 5.4.
5.3 5.4
5.1 Hydraulic Pump right installation.

Page 7 of 10
Step 6: Attach hardware part H using hardware parts B.
Step 7 : Join together the front, back bed base (12)(13) and end bar left,right (14)(15) using hardware parts
N, O and P. Attach parts (16) and (17) using hardware part E & M.
B
H
E
M
O
N
P
M
M
14
12
16
15
17
13

Page 8 of 10
Step 8 : Fit the slat cap G onto the spring slat (18) and insert into the pre-drilled holes. Please note you may
need to press firmly into place. After that fix base handle to the bed base with bolts E as shown.
Step 9 : Assemble the bed base on the left & right hydraulic frame and fix bolts starting from ' 1 ' to ' 3 ' as
shown.
D
F
E
1
2
3
2
3
1
G 18 G

Page 9 of 10
THE BED HAS BEEN FULLY ASSEMBLED
Option 1 (LEFT OPENING)
Option 2 (RIGHT OPENING)
Step 10 : Adjust the bed base, make sure that the distance with the side rail approximately 15mm to above.
Tighten all bolts and screws.
HEADBOARD
FOOTBOARD
15mm to above

Page 10 of 10
IMPORTANT NOTE
WHEN THE BED IS BUILT THE MATTRESS FRAME IS AT A 45 DEGREE
ANGLE PLEASE PLACE THE MATTRESS ON THE BED.
PLEASE NOTE THAT THE WEIGHT OF THE MATTRESS IS REQUIRED TO
HELP CLOSE THE BED.
TO LOWER THE SLEEPING PLATFORM STAND AT THE OPEN SIDE OF THE
BED AND PUSH SHARPLY DOWNWARDS USING BOTH HANDS.
MATTRESS