The Oak Bed Store CHILGROVE User manual

Page 1of 7
CHILGROVE 5FT ASSEMBLY INSTRUCTIONS
Thank you for purchasing from The Oak Bed Store. As an independent family run company, customers
such as yourself really make a big difference and we sincerely appreciate it.
We hope you are delighted with your purchase, however if you have any further queries or concerns,
please don't hesitate to contact us by;
Email at [email protected]
Telephone on 02393 552 550
Live Chat via our website
Please read the instructions carefully before assembling or use to ensure a safe
and satisfactory operation of this product.
Please note:
This product takes approximately 60 minutes to assemble with 2 people.
This product is heavy, it should be assembled as near as possible to the point of use.
Please do not drag the bed frame, always lift and reposition with 2 people to avoid personal injury
as well as damage to the product.
Please do not discard any of the packaging until you have checked that you have all the parts and
the pack of fittings.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Periodically check all screws & fixings to ensure they are secure.
Please do not jump on this bed frame.
The fittings pack contains small parts, which should be kept away from children.
In the unlikely event that this product has missing or damaged parts, please call 02393 552 550 to obtain
replacements.
1.
2.
3.
4.
5.
6.
7.
8.

Page 2of 7
Parts List
Parts Description
1
2
3
4
5
6
7
Box Qty
1
2
2
1
2
28
Headboard Frame 13
Side Rail
Sprung Slat
23
13
23
33
8
9
Cross Bar
Center Bar
Support Leg
2
1
3
33
33
33
33
Headboard Wood Post L/R
Headboard Back Support
Footboard

Box Qty
4
10
4
12
28
1
1
33
Page 3of 7
8 x 30 mm Wooden Dowel
Single Slat Cap
M6 Allen Key
M8 x 25 mm JCBC Bolt
M8 Allen Key
Hardware List (Found in box 3)
Parts Description Box Qty
A
B
C
E
F
G
H
D
M6 x 15 mm JCBC Bolt 8
M6 x 30 mm JCBC Bolt 2
M8 x 40 mm JCBC Bolt (assembly) 3
14
Double Slat Cap
I
J
L
33
33
33
33
33
33
33
33
33
33
10 x 50 mm Wooden Dowel
Minifit
K
M6 x 40 mm JCBC Bolt 8
33
M332
Square Bracket
12
CSK screw 3.5 x 16mm 33
N

Page 4of 7
A
B
C
D
B
3
12
2
Step 1: Attach the Headboard Frame (1) to the Headboard Wood Post L/R (2) using hardware A,B, and C.
Step 2: Attach the Headboard Back Support (3) to the Headboard and shown using hardware B &
D and tighten securely with (K).
K

Page 5of 7
E
5
F
6
4
Step 4: Fix the Cross Bars (6) to the Side Rails (5) using Bolt (F) and tighten using Allen Key
(K).
Step 3: Attach the Side Rail (5) to the Headboard (2) and Footboard (4) using Bolt (E) and Allen
Key (L) as shown ensuring the pre-drilled holes on the side rail are facing up.
L
K
2
2

Page 6of 7
G
7
7
6
H
8
Step 6: Fix the Support Legs (8) to the Center Bar (7) using Bolt (H) and tighten using Allen Key (L).
Step 5: Fix Center Bar (7) to the Cross Bar (6) using Bolt (G) and tighten using Allen Key (K).
K
L
7

Page 7of 7
Each wood slat must be inserted with a
single end plastic cap and double end plastic
cap as shown on the picture.
I
9
J
9
I
Step 7: Fix the Plastic Cap (I) and (J) onto the Sprung Slat (9) and insert into the pre-drilled holes
on the Side Rails and Middle Center Rail, please note you may need to press firmly into place.
Chilgrove Addendum
Please note you will require a cross head screwdriver: Attach the Metal Bracket to the
pre-drilled holes on the back of the Headboard Frame and Headboard Wood Posts L/R using the
CSK screw.
N
M