The Singing Machine STVG-718 User manual

STVG-718
Semi-Pro Compact Disc +
Graphics with Built-In TV, Video
Camera Karaoke Center
Please read before using this unit.
Instruction Manual

WARNINGS
WARNING:TO REDUCE THE RISK OF
FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
OR BACK. NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to alert you
to the presence of uninsulated
dangerous voltage within the
product's enclosure that might be of
sufficient magnitude to constitute a
risk of electric shock. Do not open
the product's case.
This symbol is intended to inform
you that important operating and
maintenance instructions are
included in the literature
accompanying this product.
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
DRIPPING WARNING
The product shall not be exposed to dripping
or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
product.
VENTILATION WARNING
The normal ventilation of the product shall not
be impeded for intended use.
This CD player is made and tested to meet
exacting safety standards. It meets FCC
requirements and complies with safety
performance standards of the U.S.
Department of Health and Human Services.
Warnings:
!This CD player employs a laser light beam.
Only a qualified service person should
remove the cover or attempt to service this
device, due to possible eye injury.
!The use of controls, adjustments, or
procedures other than those specified
herein might result in hazardous radiation
exposure.
!The apparatus shall be used in an open
area.
CAUTION
This compact disc player is classified as a
CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT label is
located on the rear panel.
CAUTION!
Invisible laser radiation when open and inter
locks defeated. Avoid exposure to beam.
1

IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
4.Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning the exterior only. Do NOT attempt to clean the inside.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub; in a wet basement, or near a swimming pool, and the like.
8. Accessories - Do not place this product on an unstable cart, stand tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer's instructions, and should use a mounting accessory recommended by
the manufacturer.
9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided.
11. Power Sources - This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other sources, refer to the operating
instruction.
12. Grounding or Polarization - This product may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
Alternate Warnings - This product may be equipped with a three-wire grounding-type plug, a plug having a
third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the grounding-type plug.
13. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
14. Protective Attachment Plug - The product is equipped with an attachment plug having overload protection.
This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has used a replacement plug specified by
the manufacturer that has the same overload protection as the original plug.
2

IMPORTANT SAFETY INSTRUCTIONS
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
S2898A
3
15. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system
is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA70, provides information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode. See figure:
16. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and power-line surges.
17. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
18. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
19. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of
any kind on the product.
20. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
21. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the product to its normal
operation.
e) If the product has been dropped or damaged in any way, and
f ) When the product exhibits a distinct change in performance - this indicates a need for service.
22. Replacement Parts - When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
23. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
24. Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the
manufacturer.
25. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.

INTRODUCTION
4
Your Semi-Pro Compact Disc+Graphics with Built-In TV, Video Camera Karaoke Center will
provide you with many years of fun and entertainment. It can let you be the "star" as you
sing along with your favorite recordings and hear your voice with the music through the
system's speaker.
This Karaoke System is made up of compact designs and full of features, yet it is easy to
use. Just a few simple instructions and you will become an expert. Before you use your unit,
please read this manual thoroughly to familiarize yourself with all the features available and
the sections of the manual that describe their operation. Next go to the section for the
specific operation you wish to perform.
For your easy reference, listed here are some of the main features of this Karaoke Center:
Lyrics on TV screen - displays the lyrics with the tempo of music when playing CD+G discs.
Auto Voice Control (A.V.C.) - lets you replace the original singer's voice with your own
voice when any prerecorded multiplex karaoke disc or tape is played. To activate, just rotate
Mic Volume to a comfortable listening level, and Auto Voice Control for the best balance
between playback and microphone levels.
Balance Control - lets you adjust the balance between the prerecorded original singer's
voice and the music if you use a multiplex karaoke tape or disc.
Echo Control - lets you add an echo to enrich your voice for a concert hall effect.
Multiple Karaoke music center - it plays audio Compact Discs, CD+Graphics discs and
Cassette tapes in its cassette deck.
- lift up camera lens to display your image on the Singing Machine’s monitor.
Built-In Speaker - lets you share the music with your family or friends.
Auxiliary Output Jacks - let you connect another audio output component, such as an
equalizer/booster or a PA system.

CONTROL LOCATIONS
5
FRONT VIEW
STVG-718
2 3 4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
37
38
39
40
41
42
43
44
45
1
36

CONTROL LOCATIONS
6
REAR VIEW
REAR VIEW
46. Rod Antenna 50. VIDEO OUT Jack 54. BRIGHTNESS Control
47. Mic Holder 51. AC POWER Cord 55. VERTICAL HOLD Control
48. AUX OUTPUT Jack (R) 52. Mic Holder
49. AUX OUTPUT Jack (L) 53. CONTRAST Control
FRONT VIEW
1. Monitor 16. AUX INPUT Jack (L) 31. PLAY/PAUSE Button
2. Model Number 17. AUX INPUT Jack (R) 32. BAND Selector
3. CD Door Open Lid 18. BALANCE Control 33. FM (ST.) Indicator
4. CAMERA Lens 19. MASTER VOLUME Control 34. Dial Pointer
5. CDG LED 20. VIDEO OUT Selector 35. PLAY/PAUSE LED
6. LED Display 21. Cassette Door 36. TUNING Knob
7. REPEAT LED 22. RECORD Button 37. SKIP Button
8. REPEAT Button 23. PLAY Button 38. HEADHONE Jack
9. STOP Button 24. REWIND Button 39. AUTO VOICE CONTROL
10. FUNCTION Selector 25. FAST FORWARD Button 40. MIC 1 Jack
11. SKIP Button 26. STOP/EJECT Button 41. MIC 2 Jack
12. ON/OFF LED 27. PAUSE Button 42. ECHO Control
13. ON/OFF Button 28. Loudspeaker 43. MIC VOLUME Control
14. VIDEO IN Jack 29. PROGRAM LED 44. MONITOR Selector
15. PITCH Control 30. PROGRAM Button 45. Loudspeaker
46
47
48
49
50
51
52
53
54
55

7
MAKING THE CONNECTIONS
CONNECTING POWER
You can power the system from a standard AC outlet by using the supplied power cord.
CAUTION: The supplied AC power cord has a polarized plug that fits into the wall outlet only one
way. If the plug does not fit properly, turn it over and try again. Do not force it.
CONNECTING TO YOUR TV
The Singing Machine provides a patch cord to give you the option of connecting your unit to an
external audio/sound system and video device. The patch cord has three RCA jacks at each
end. White and Red are for left and right audio connections and the yellow is for connecting the
video.
Make sure that you have a CDG disc in the Singing Machine and playing when you are making
this connection. You will know you have the proper settings on your TV or VCR as soon as you
see the Singing Machine logo or lyrics on the screen!
VIDEO CONNECTION
Please follow the steps below to display CDG lyrics on the TV screen:
(1) Locate the multicolored patch cords.
(2) Connect video cable (yellow) to the Video Out of the back of the Singing Machine.
(3) Connect the other end of the video cable (yellow) to the Video Input on your TV or VCR.
VIDEO
INPUT
AUDIO
INPUT
RL
VIDEO OUTPUT
(Yellow Jack)
VIDEO INPUT
(Yellow Jack)
REAR VIEW OF
SINGING MACHINE REAR VIEW OF TV

MAKING THE CONNECTIONS
8
If your television does not have the required Video Input, you will need an RF Modulator (Radio
Frequency Modulator), which connects through your TV Antenna or cable line and serves as
Video Input.
An RF Modulator can be purchased at almost any consumer electronics retailer. If you are
connecting the video from the Singing Machine to either a television or a VCR video input jack,
you must specify the source the TV or VCR is to display.Your TV or VCR user guide can tell you
how to display the video signal from the ‘Video In’ jack.
If you don’t have the manual for your TV or VCR we suggest calling the TV or VCR
manufacturer’s customer service department. Only the manufacturer will be able to tell you very
quickly how to configure your TV or VCR to display the video signal coming from the ‘Video
Input’ jack.
DNote: Some projection TV sets do not display the standard blue background used on most
CDGs properly. If the background color is inconsistent or flashing, please try connecting your
Singing Machine to a standard tube television.
COMMON WAYS TO CONFIGURE YOUR TV OR VCR
Your Singing Machine is designed to connect to your TV the same way you would connect a
video camera, VCR or video game. The Singing Machine is constantly sending the video and
audio signals to the 'Video Out' and 'AUX OUT' jacks whenever you play a CDG. So, load a CDG
into your Singing Machine before you start making these connections. You will see lyrics on the
TV screen as soon as you get the setup completed correctly.
We refer to TV/VCR because manufacturers use very similar ways to connect TVs and VCRs
and you can connect your Singing Machine to a TV, VCR or satellite system.The setup of your
TV/VCR is the most difficult part of making the connection for displaying your Singing Machine
lyrics. In most homes, the TV has either a cable connected or antennae in use. Once you
connect your Singing Machine to the TV/VCR, you must 'tell' your TV/VCR to display the input
from the Singing Machine instead of the usual input from the cable or antennae.
Check your TV/VCR user manual for the easiest way to setup your particular entertainment
system. If you don't have your manual you can always call your TV/VCR manufacturer for that
information or try hitting their website for online assistance. We've listed below the most
common ways of setting up a TV/VCR:
(1) In the setup menu for configuring the TV/VCR there may be an option on 'Input Selection'
where you may choose between 'Cable/Ant.', 'Video 1', or 'Video 2' etc. as the input source.
(2) Try looking for a 'Video' channel between the highest channel and the lowest channel on
your TV or VCR. (i.e. Between 99 and 2 may be 'VIDEO' or 'INPUT' or 'GAME')
(3) Look for a button on the remote control for the TV/VCR you are connecting to that says
'VIDEO', 'VIDEO 1', 'Game', 'AUX', 'EXT', 'LINE1', 'LINE-IN' or occasionally the 'VCR'
button will display the Video input source.

MAKING THE CONNECTIONS
9
CONNECTING A VIDEO COMPONENT FOR INPUT
Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from
another video source:
(1) Locate the multicolored patch cords.
(2) Connect video cable (yellow) to the Video In of the front of the Singing Machine.
(3) Connect the other end of the Video Cable (yellow) to the Video Output on another video
source such as a VCR.
(4) Set the FUNCTION Selector switch to AUX and the MONITOR Selector switch to
CDG/AUX.
(5) Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of
the Singing Machine to have the best picture quality.
AUDIO CONNECTION
Connect the unit to your TV or home stereo system using the White and Red connections on the
supplied patch cord. Plug the white end of the patch cord into the white AUX OUT jack on the
unit. Plug the red end of the patch cord into the red AUX OUT jack on unit. Now connect the other
end of the cable’s white (left channel) and red (right channel) plugs to your TV or home stereo
system’s ‘AUDIO IN’ or ‘AUX IN’ jacks.
VIDEO
INPUT
AUDIO
INPUT
RL
AUX OUTPUT
L
(White Jack)
REAR VIEW OF TV
AUDIO INPUT
L
(White Jack)
AUX OUTPUT
R
(Red Jack)
AUDIO INPUT
R
(Red Jack)
REAR VIEW OF
SINGING MACHINE
LR AUX IN
VIDEO IN VIDEO
OUT
AUDIO
OUT
RL
VIDEO INPUT
(Yellow Jack)
VIDEO OUTPUT
(Yellow Jack)
FRONT VIEW OF
SINGING MACHINE REAR VIEW OF VCR

MAKING THE CONNECTIONS
10
CONNECTING AN AUDIO COMPONENT FOR INPUT
To connect another audio source (such as a Tuner, an AV Receiver or a VCR) so you can sing
along with its music, simply connect the Audio Output jacks (Red & White RCA jacks) to the
Singing Machine’s AUX IN L & R jacks.
VIDEO
OUT
AUDIO
OUT
L
R
AUX INPUT
L
(White Jack)
ANOTHER
AUDIO COMPONENT
AUDIO OUTPUT
L
(White Jack)
AUDIO OUTPUT
R
(Red Jack)
AUX INPUT
R
(Red Jack)
FRONT VIEW OF
SINGING MACHINE
LR AUX IN
VIDEO IN

MAKING THE CONNECTIONS
MONITOR Selector
!To display image on the monitor from another video source, set the MONITOR Selector to
CDG/AUX mode and set the FUNCTION Selector to AUX mode.
!To display CDG lyrics on the Singing Machine’s monitor, set the MONITOR Selector and
FUNCTION Selector to CDG mode.
!To display your image on the Singing Machine’s monitor, set the MONITOR Selector to
CAMERA mode.
!To turn off the monitor on the Singing Machine, set the MONITOR Selector to OFF mode.
!Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD controls at the back of the
Singing Machine to have the best picture quality.
VIDEO OUT Selector
!To display your image on the other machine, set the VIDEO OUT Selector to CAMERA mode.
!To display CDG lyrics on the other machine, set the VIDEO OUT Selector and FUNCTION
Selector to CDG mode.
!To display image on the other machine from another video source, set the VIDEO OUT
Selector and FUNCTION Selector to AUX mode.
11

CD OR CD+G OPERATION
PREPARATION
!This unit is designed to play CD’s bearing the identification logo " ". If CD’s do not
conform to the CD standard, they may not play properly.
!Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion
from the center of the disc to the outside edge.
!Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or
thinner to clean compact discs. These chemicals will permanently damage the plastic
surface of the disc.
!Always place the compact disc on the disc tray with the label facing upward. Compact discs
can be played on only one side.
!To remove a disc from its storage case, press down on the center of the case and lift the disc
out, holding it carefully by the edges.
!Discs should be returned to their cases after use to protect them from dust and scratches.
!To prevent warping the disc, do not expose it to direct sunlight, high humidity or high
temperatures for extended periods of time.
!Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips
pens may damage the surfaces of the disc.
PLAYING CD OR CD+G DISC
Reminders:
!Adjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level.
!Adjust MIC/ECHO/BALANCE controls as needed to achieve the desired mix of music and
vocals through your TV or sound system.
!Never place anything except a compact disc on the disc tray. Foreign objects can damage
the unit.
!Only place one disc on the disc tray at a time.
TURNING POWER ON/OFF
!To turn on the Karaoke center, press the ON/OFF button, the ON/OFF LED will light up.
!To turn off the system, press the ON/OFF button again, the ON/OFF LED will turn off.
FUNCTION SELECT
Set the FUNCTION Selector to CD+G.
LOADING A DISC
!Lift up the CD door to open the CD/CDG compartment. Place a disc in the compartment with
the printing side facing upward and the shiny side facing down.
!Gently close the CD door to the CD/CDG compartment. After a few seconds, the LED will
display the total number of tracks. (If no disc is loaded, it will display “ ”.)
(Refer to the Trouble Shooting Guide on page E17 if a disc is loaded but the total tracks
do not appear.)
12

13
CD OR CD+G OPERATION
PLAY/PAUSE MODE
!To start playing, press the PLAY/PAUSE button. The first track [ ] and the PLAY/PAUSE
LED will be lit.
!To temporarily stop playing, press the PLAY/PAUSE button. The PLAY/PAUSE LED
Indicator will flash.
!To resume play, press this button again.
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total
number of tracks will be shown on the LED window).
SKIP PLAY(FOR BOTH CD AND CDG DISCS)
!During STOP mode, you can skip up or down to your desired track number by pressing a
SKIP button ( - SKIP - ).
!To resume playing the selected song, press PLAY/PAUSE button.
SEARCH (FOR AUDIO CD DISC ONLY)
When playing any audio CD, press and hold the SKIP button ( -SKIP- ). The CD will
search at high speed in the forward or backward direction. Normal play will continue when you
release the button.
REPEAT
!To repeat the track currently playing, press the REPEAT button once. The REPEAT LED will
start to flash.
!To repeat all tracks, press the REPEAT button twice. The REPEATLED will light up and stay
lit.
!To clear the repeat function. Press the REPEAT button again. The REPEATLED will turn off.
PROGRAM
!Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM key
until the PROGRAM LED flashes, the track will read [ ].
Step 2: Press the double arrow keys ( -SKIP- ) to select a desired track.
Step 3: Press PROGRAM key to confirm entry. You can repeat the same steps up to a
maximum of 20 tracks.
Step 4: Press PLAY to activate PROGRAM.
!Press the STOP button to clear all the programmed entries.
MONITOR (FOR CDG ONLY)
!Set MONITOR Selector to CDG/AUX if you want to display a CDG lyrics on the Singing
Machine’s monitor.

CASSETTE OPERATIONS
LOADING AND UNLOADING CASSETTES
Follow these steps to load and unload
cassette:
1. Press STOP/EJECT button (13).
2. Insert cassette with desired side facing
you, tape surface down. Avoid touching
tape.
3. Close cassette holder/tape deck cover.
To ensure firm locking of cassette
holder/tape covers, please press the
cassette door(s) at the center point (or
the rightmost positions) until a 'click'
sound is heard.
Note: To unload, press STOP/EJECT button
(13), remove cassette and close
cover.
PLAYBACK
1. Press the ON/OFF button (1) and set the
FUNCTION Selector (3) to TAPE mode.
2. Load cassette into the cassette
compartment.
3. Depress PLAY button (6).
4. Adjust MASTER VOLUME (5), and
BALANCE (4) controls to your pleasure.
5. To stop tape, press STOP/EJECT button
(13) on that Deck once. (Press a second
time to eject the tape.) Or, when the tape
reaches its end, that deck will
automatically stop and its PLAY button
(6) will be released.
MICROPHONES/ECHO/PITCH
1. When either or both Microphone are
plugged into the Microphone jacks (9), their
output is mixed with the playback from
Radio/Cassette tapes/CD/CDG discs.
2. Adjust MIC VOLUME (12) for best balance
between playback and microphone levels.
3. Adjust ECHO (10) to add depth and
richness to vocals, and PITCH (2) to control
the speed of cassette playback.
SING ALONG - TAPE
1. Follow instructions for PLAYBACK.
2. Follow instructions for
MICROPHONES/ECHO/PTICH.
3. Adjust MASTER VOLUME (5), PITCH (2)
and ECHO controls (10). Your voice will be
combined with the playback output and will
be heard through the loudspeaker.
14
1
2
3
4
5
6
7
8
9
10
12
13
11

RADIO AND OTHER OPERATIONS
15
AM/FMRADIO PUBLIC ADDRESS - USING A
1. Press the ON/OFF button (1). MICROPHONE
2. Switch FUNCTION Selector (3) to Th e un it c an b e us ed a s a PA
RADIO position. (PublicAddress System).
3. Switch BAND selector (11) to either Public Address (PA) Operation Procedures
AM, FM or FM (ST.) radio position. 1. Connect the supplied Microphone to
4. For FM or FM (ST.) reception, use either one of the MIC input jacks.
directional antenna on back of unit (7) 2. Press the ON/OFF button to turn the
for best signal. (AM antenna is built-in). unit on.
5. Turn TUNING knob (8) to select desired 3. Se t th e FU NC TI ON Se le ct or to
station as indicated on dial. CD G/ TAP E/ AU X. Mo ve th e MI C
6. Adjust MASTER VOLUME (5) to your VOLUME control to central position.
pleasure. 4. Move the ON/OFF switch located on
7. To turn the radio off, set FUNCTION the Microphone to ON position and
Se le ct or (3 ) to CD G/ TAP E/ AU X speak or sing to the Microphone. The
position. Microphone sensitivity and loudness
could be adjusted as required by
SING ALONG - RADIO turning the MIC VOLUME control
1. Follow operating instructions for AM/FM and/or MASTER VOLUME control.
radio. 5. To add depth or ambiance to your
2. Fo llow oper at in g in stru ct io ns fo r voice, adjust the ECHO control until the
MICROPHONES/ECHO. desired effect is obtained.
3. Adjust MASTER VOLUME (5), MIC Note: To prevent feedback or whistling
VOLUME (12) and ECHO (10) controls. from occurring, please be sure that
Your voice will be combined with the the microphone is not too close to
radio station output and will be heard the unit.
through the loudspeaker.
RECORDING SING ALONG - RADIO
1. Load a blank cassette.
2. Follow instructions for Sing Along-
Radio, including adjusting volume,
ECHO and PITCH controls.
3. Press both RECORD and PLAY
buttons of Cassette Deck at the same
time. The combined output of your
voice and radio station output will be
recorded on the blank tape in Cassette
Deck.
Note: If you want to record a radio
broadcast without Sing Along, load
a blank tape into Cassette Deck.
Unplug the microphone.

CARE AND MAINTENANCE
NOTE
DScrewdrivers and other metal objects
should never be allowed to come in
contact with tape heads. These will
scratch the sensitive surface causing
damage to yourtapes.
DMagnets or magnetized objects
should not be placed near tape
heads.
COMPACT DISC
Handling Disc
Although the music tracks in the disc are
covered with a protective layer, it is still
advisable to treat the disc carefully.
Ensure that you always pick up discs by
the edge, and put them back in their
holders immediately after use.
CLEANING DISC
Cleaning will not normally be necessary.
However, should fingerprints, dust or
dirt appear, you can wipe them off with a
soft, lint-free cloth. Wipe the disc in a
straight line from center to edge. You
can moisten the disc first with ordinary
tap water if necessary.
NOTE: Do not use the
detergent or abrasive
cleaning agents, for they can
damage the disc.
CD PLAYER
The player mechanism is fitted with self-
lubricating bearing and must not be
oiled or greased.
To prevent fire or shock hazard,
disconnect your stereo system
from the AC power plug when
cleaning.
POWER SWITCH
After using the unit, turn off the power by
pressing the ON/OFF button.
CLEANING THE UNIT
CLEANING TAPE HEAD
When the tape is running, magnetic tape
residue, powder and dust naturally
accumulate on the tape deck heads, capstan
and pinch roller, when they become too dirty,
you will find:
!Sound quality deteriorates.
!The output sound level drops.
!The previous recording is not completely
erased.
!Recording is not performed satisfactorily.
Therefore, for continued high
performance from the cassette section,
periodically clean the heads, pinch
rollers and capstans whenever an
accumulation of dust and red-brown
oxide particles is noticed. To do this open
the cassette compartments. Carefully
rub each head (4,5), pinch roller (3) and
capstan (2) with a cotton swab (1)
moistened with isopropyl alcohol or
special head-cleaning fluid.
Use a clean soft cloth moistened with plain
lukewarm water and wrung dry. Never use
benzol, benzene or other strong chemical
cleaners since these could damage the finish
or your unit. It is important that no liquid
reaches the inside of the unit.
To clean the exterior of the unit, simply wipe
with a soft clean cloth moistened with plain
lukewarm water.
Proprietary tape head cleaners are
available from most HI-FI retail outlets.
CASSETTE DECK CARE
12
543
16

TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to
locate and remedy the problem.
SOLUTION
Insert the power plug into the AC
outlet.
Turn up the volume.
Turn up the volume at TV set/PA
system.
Turn on the power at TV set/PA
system.
Follow directions on page E9 for
“Audio Connection”.
Select the correct function.
PROBLEM
No power when POWER
is on.
No sound.
POSSIBLE CAUSE
No power plug connection at
the AC outlet.
Volume control is set to
minimum.
Volume control on TV set/PA
system is set to minimum.
TV set/PA system power is
OFF.
AUX OUT jacks not
connected.
The wrong function is
selected.
Select AUX IN as the source for
your home stereo.
Follow direction on page E9 for
connecting to a home stereo
system.
No sound - If audio is
going through home
stereo.
Source Selection on your
stereo is not set properly.
Improper Connection to
stereo system or PA.
Check the outlet with a working
lamp or other electrical appliance.
No power when plugged
in.
The AC outlet may not have
power.
Insert disc correctly.
Wipe clean with soft cloth.
Use a new disc.
Use a new disc.
Only use discs bearing standard
logo as described on page E12.
Disc is inserted upside
down.
Disc is dirty.
Disc is scratched.
Disc is warped.
A nonstandard disc is
inserted.
Moisture has formed inside
the CD deck.
Wait about 20 to 30 minutes to let
it dry out.
CD PLAYER
cannot work normally or
“ ”, “ ” , or “ ” are
displayed.
aai aa aaa
Singing Machine needs to
be reset.
Disconnect the machine from
power source for 30 seconds.
17

TROUBLE SHOOTING GUIDE
No song lyrics appear
on screen.
Connect the video cable to the
Singing Machine’s VIDEO OUT
and to the TV VIDEO IN.
Using your TV remote to select
VIDEO input.
Connect from VIDEO OUT of the
system to the VIDEO IN of your
VCR or connect to an RF
Modulator and then to the TV
cable input. Refer to “Making the
Connections” on page E7.
Check the disc to be sure it is a
CDG. (See page E21 for details.)
Video cable is not connected
properly to the TV.
Source selector on TV is not
set to VIDEO.
Check disc to be sure it is clean.
(See page E16 for cleaning
instructions.)
A CDG is loaded but the
CDG indicator is not lit.
TV does not have video line
input.
CASSETTE unsteady
tape sound.
Cannot record.
Recorded tape sound
is distorted.
Dirty capstan.
Irregular cassette tape
winding.
The erasure prevention tabs
are broken out.
Play button and Record
button were not pressed
down simultaneously.
Dirty head.
Faulty cassette tape.
Clean capstan.
Replace tape.
Replace tape or cover tab
openings with adhesive tape.
When recording, make sure that
both the Record and Play buttons
are pressed down at the same time.
Clean capstan.
Replace tape.
SOLUTION
PROBLEM POSSIBLE CAUSE
Follow directions on page E7 for
“Making the Connections”.
No sound - If audio is
going through TV or
VCR.
Source Selection on TV or
VCR is not correct.
VERTICAL HOLD Control is
not set correctly.
Adjust the VERTICAL HOLD
Control.
Picture is jumping up.
18
Pitch control may be in
wrong position. Adjust PITCH Control.

TROUBLE SHOOTING GUIDE
SOLUTION
PROBLEM POSSIBLE CAUSE
The Camera Lens is down. Lift up a Camera Lens.
No image display on
Singing Machine’s
monitor. MONITOR Selector is not
set properly.
Set MONITOR Selector to
CAMERA mode.
19
Image is blurry.
Camera has not warmed up.
Camera lens is dirty.
Wait a minute for the camera to
warm up.
Clean the camera lens.
Camera lens is out of focus.
Adjust the lens of the camera by
slightly rotating either left or right
until the display is clear. Do not
overturn the lens.