The Snell Group Testo 876 User manual

QuickStart: Testo 876, 880, 881, 882
© 2011 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT 05641 / 800.636.9820 / www.thesnellgroup.com
Testo 880 Page 1
1. MEMORY:
Insert the SD memory card in the slot under the bay cover on the left side of the camera (right bay not used).
2. POWER:
Insert a fully charged battery into the Battery Bay until it is flush with the bottom of the handle.
Power can also be supplied by the included AC adapter.
3. START:
Remove lens cap then push and release the Power button, this will initiate the camera’s start sequence.
4. FOCUS:
Manual Focus: Place the Focus Selector to the right position then twist the focusing ring
clockwise or counterclockwise.
Motorized Focus: Place the Focus Selector to the left position then focus by pushing or pulling the focus trigger.
5. AUTO ADJUST (Level & Span):
NOTE: The camera might start in either in auto or manual adjust mode depending on which mode it was in during
last use.
If currently in Manual mode (indicated “M” under the
palette bar) press the Right Function button to
show the “Set Scale” menu.
Move the joystick left to highlight the Auto scale
icon then press the OK button.
6. MANUAL ADJUST (Level & Span):
If currently in Auto mode (indicated “A” under the palette bar) press the Right Function button to show the “Set
Scale” menu.
Move the joystick right to highlight either the lower scale temp. icon, both upper & lower or the upper
temp. scale icon.
Adjust Span by moving the Joystick up and down while either the upper or lower scale temp. is
highlighted.
Adjust Level by moving the Joystick up and down while both the upper and lower scale temps. are
highlighted.
Press the OK button to hide the Scale menu yet remaining in manual mode.
Image Trigge
r
Focus Trigge
r
Focus Ring
Focus
Selector
Joystick/O
K
Left function
Palette
& Scale
Auto/Manual
indicator
Escape Powe
r
Battery
Indicator
Memory
Power &Data
Bay
(on side)
Right Function Battery
Bay

QuickStart: Testo 876, 880, 881, 882
© 2011 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT 05641 / 800.636.9820 / www.thesnellgroup.com
Testo 880 Page 2
IFOV =3.5 mRad (Theoretical with 160x120 Detector and standard 32˚x23˚lens) Detect 1in. target @ 23ft.
IFOV =1.7 mRad (Theoretical with 320x240 Detector and standard 32˚x23˚lens) Detect 1in. target @ 49ft.
7. PAUSE IMAGE:
Squeeze and release the Image Trigger while in manual or auto mode. Return to a live image by pushing the
Escape button. Note you can not pause and image while the scale set menu is
showing.
8. SAVE IMAGE:
First pause the Image Trigger as above, squeezing the Image Trigger again
will save the paused image then return the camera to live mode.
9. RECALL IMAGE:
Press the OK button to show the on screen menu list.
Use the Joystick to navigate down to “Image Gallery” then over to “Show
Images”.
Use the Joystick to select the desired image and press OK.
10. PALETTE:
Press the OK button to show the on screen menu list.
Use the Joystick to navigate down to “Palette” then over to see palette
choices.
Use the Joystick to select the desired palette and press OK.
11. EMISSIVITY/BACKGROUND:
Press the OK button to show the on screen menu list.
Use the Joystick to navigate down to “Emissivity” then over to change Emissivity or Background values.
875, 880, 881
882