Thermarest FOOTPRINT User manual

Please follow these instructions to guide you through assembly only. For
complete instructions on the recommended care and use of your tent, watch
the videos at www.thermarest.com/tents.
WARNING:
KEEP ALL FLAMES AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the flammability requirements of CPAI-84. The fabric
may burn if left in continuous contact with any flame source.
1.Lay out footprint, assemble poles.
Start with the larger 3 hubbed pole
with gold pole ends and put the pole
tips into the grommets with the gold
webbing. The Y hubs will be on either
side of the long general rectangular
shape of the footprint. Attach gold
buckle webbing to the grommets,
they go over the current grommets
against the base of the poles.
FOOTPRINT PACKAGE
INCLUDES:
Footprint, 4Webbing/Grommet Straps
FOOTPRINT, POLE AND FLY SET-UP INSTRUCTIONS
© 2017 Cascade Designs, Inc.
4000 1st Ave. South | Seattle, WA | 98134 U.S.A. | 1-206-505-9500 | 1-800-531-9531
Limited Lifetime Warranty | Art #82-872 EN | Printed in Taiwan
REST BETTER. PLAY BETTER.
TRANQUILITY™
FOOTPRINT
Protect the floor of your Tranquility™
tent by pitiching your tent on top of the
footprint. You can secure the tent to the
footprint by putting the tent pole ends
into the grommets.
You can also create a unique shelter
by combining the footprint with your
Tranquility tent poles and fly, utilizing
the included webbing and grommet
straps.
INSTRUCTIONS

1. Drape the fly over the pole
centering the fly over the center
pole and the other arch entry of
the fly towards the narrow ends
of the rectangle. Attach buckles
from gold webbing grommets.
2. Insert secondary poles into blue
grommets, clip peak to hub and
lift fly over hub.
3. Repeat on other side.
4. Guy out over the door ends for a
tight pitch, Stake out corners of
the footprint.
2. ATTACH RAINFLY
1
2
3
4