Thermarest TRANQUILITY WING User manual

TRANQUILITY™WING
SET-UP INSTRUCTIONS FOR THE
TRANQUILITY 4 AND 6 WINGS
Please follow these instructions to guide you through assembly only. For
complete instructions on the recommended care and use of your tent, watch
the videos at www.thermarest.com/tents
WARNING:
KEEP ALL FLAMES AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the flammability requirements of CPAI-84. The fabric
may burn if left in continuous contact with any flame source.
1.Lay out wing top up and
assemble the poles.
2. Shorten / adjust guy cord to half-length
and lay out away from wing.
PACKAGE INCLUDES:
Wing, 1center pole, 2 support poles,
6guy cords with tensioners, 6stakes
1. PREPARE FOR SET-UP
© 2017 Cascade Designs, Inc.
4000 1st Ave. South | Seattle, WA | 98134 U.S.A. | 1-206-505-9500 | 1-800-531-9531
Limited Lifetime Warranty | Art # 82-529 EN | Printed in Taiwan
REST BETTER. PLAY BETTER.
2

1. Stake out cord ends without pulling
on the wing, and cord does not
need to be pulled tight.
2. Insert poles under the wing
into the grommets.
The center pole is the longest pole.
3. Adjust cord and re-stake as needed
for a taught pitch.
WING SHELTER
OVER TENT
1. Turn wing inside-out and attach
one of two toggles to the hub clip
on the apex of the door pole.
2. Walk to other door with the wing
folded in half (still inside out) and
attach the second toggle to the hub
clip at the apex of the second door.
3. Now flip the folded half of the wing
over the apex of the tent.
4. Stake out wing and adjust cord for
tension.
1
2
3
4
2
3
1