Thermarest Tranquility 6 Manual

SET-UP INSTRUCTIONS
Please follow these instructions to guide you through assembly only.
For complete instructions on the recommended care and use of your tent,
watch the videos at www.thermarest.com/tents
WARNING:
KEEP ALL FLAMES AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the flammability requirements of CPAI-84. The fabric
may burn if left in continuous contact with any flame source.
1.Lay out tent (floor facing down) with door open.
2. Assemble tent poles off to the side.
3. Place the large, 3-hubbed pole across the tent so
that the 3 hubs are aligned in the center of the tent.
PACKAGE INCLUDES:
Tent body, rainfly, 4guy cords with tensioners, 10
stakes. Frame assembly: 13-hubbed pole assembly,
2secondary poles.
1. PREPARE FOR SET-UP
© 2017 Cascade Designs, Inc.
4000 1st Ave. South | Seattle, WA | 98134 U.S.A. | 1-206-505-9500 | 1-800-531-9531
Limited Lifetime Warranty | Art # 82-527 EN | Printed in Taiwan
REST BETTER. PLAY BETTER.

1. Insert gold ends of the pole into
grommets with gold webbing at the
tent’s 4 corners.
2. Step through opened door onto
tent floor. Locate center tent clip
with gold webbing and attach to
the tent pole’s top, center hub.
3. Attach other gold webbing clips
to the Y hubs on either side of the
main hub.
4. Clip gray webbing clips to
the poles.
5. Insert secondary poles with
blue ends into blue webbing
grommets on either side of
tent doors.
6. Attach blue webbing clips to center
hubs. Clip gray webbing clips to the
poles.
1. Turn rainfly inside-out and attach
one of two toggles to the hub clip
on the apex of the door pole.
2. Walk to other door with the fly
folded in half (still inside out) and
attach the second toggle to the hub
clip at the apex of the second door.
3. Now flip the folded half of the
rainfly over the apex of the tent.
4. Buckle the 4 corners to matching
gold clips.
5. Stake out tent at four corners.
2. ASSEMBLE TENT FRAME
3. ATTACH RAINFLY
1
1
1
2
3
4
5
6
1
2
3
4
4