Thermo King ColdCube Connect User manual

June 2021 TTKK 6600994422--1111--OOPP--EENN
ColdCube™™ Connect
Operator’s and Diagnostic Procedures
Operator’s Manual

2TK 60942-11-OP-EN
IInnttrroodduuccttiioonn .................................................................................................. 66
ustomer Satisfaction Survey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Emergency Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Thermo Assistance should only be contacted for breakdown
and repair assistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
General Inquires and Unit Maintenance . . . . . . . . . . . . . . . . . . . . . . 8
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Accessing Operator Manual Translations . . . . . . . . . . . . . . . . . . . . . 8
SSeeccttiioonn 11 -- SSaaffeettyy IInnffoorrmmaattiioonn............................................................ 99
Danger, Warning, aution, and Notice. . . . . . . . . . . . . . . . . . . . . . . . 9
General Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Electrical Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FirstAid................................................... 15
SSeeccttiioonn 22 -- UUnniitt DDeessccrriippttiioonn .............. .. ........................................ .. .... 1177
SSeeccttiioonn 33 -- SSppeecciiffiiccaattiioonnss.... .. ...................................... .. ...................... 1199
old ubeTM onnect Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Fuse Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SSeeccttiioonn 44 -- oolldd uubbee™™ oonnnneecctt IInnssttaallllaattiioonn...................... .. .... 2211
Electrical onnections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
onnecting to a D Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Low Voltage D Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
onnecting to a 110-240 VA Power Source . . . . . . . . . . . . . . . . . 24
SSeeccttiioonn 55 -- HHAA PP // BBlluueettooootthh MMoodduullee -- OOppttiioonnaall ................2255
Wiring.................................................... 25
Table of Contents

TK 60942-11-OP-EN 3
Regulator Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
How to Start Using EV onnect Application . . . . . . . . . . . . . . . . . . 26
Start the Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Home Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
HA P Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Showing the Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Real Time Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Real Time Alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Service ................................................... 30
Parameters for Expert Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
SSeeccttiioonn 66 -- OOppeerraattiioonn ................ .. ........................................ .. ................ 3311
ontrol Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Electronic Thermostat (EV O) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Switch ON the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Switch OFF the Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Lock / Unlock the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Modify the Setpoint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Setting onfiguration Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Enable Temperature Decimal Point. . . . . . . . . . . . . . . . . . . . . . . . . . 34
hange Temperature Unit of Measure (° or °F) . . . . . . . . . . . . . . 35
Set a abinet Probe Offset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Set High / Low Temperature Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Replacement of the old ube™ onnect Fuse . . . . . . . . . . . . . . . 36
TTaabbllee ooff oonntteennttss

4TK 60942-11-OP-EN
Pre- ooling Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Pre- ooling old ube™ onnect . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Defrost ................................................... 37
SSeeccttiioonn 77 -- TTrroouubblleesshhoooottiinngg ................ .. ........................................ .. .. 3388
SSeeccttiioonn 88 -- oolldd uubbee™™ oonnnneecctt FFLLEEXX .................... .. .................. 4411
Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
old ube™onnect FLEX Models Power Source . . . . . . . . . . . . 41
Included Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Battery Safety Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
A /D Battery harger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Battery harger Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
User Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
SSeeccttiioonn 99 -- lleeaanniinngg aanndd MMaaiinntteennaannccee .. .................................... .. 4455
SSeeccttiioonn 1100 -- RReeccoovveerr RReeffrriiggeerraanntt .. .. ................................ .. .............. 4466
SSeeccttiioonn 1111 -- DDiiaaggnnoossttiiccss .................. .. .................................. .. .............. 4477
EV O EV3294 ontroller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Secop/Nidec BD ompressors’ Electronics . . . . . . . . . . . . . . . . . . . 48
old ubeTM onnect troubleshooting guide – for service
partner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
SSeeccttiioonn 1122 -- DDiiaaggrraamm IInnddeexx .. .. .................................... .. ...................... 5566
SSeeccttiioonn 1133 -- AAppppeennddiixx.. .. ...................................... .. ................................ 5577
Models / vans match - Product range . . . . . . . . . . . . . . . . . . . . . . . . 57
Shelves Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
TTaabbllee ooff oonntteennttss

TK 60942-11-OP-EN 5
140 litres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
330 litres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
720 litres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
onfiguration Parameters For Different Models . . . . . . . . . . . . . . 62
Technical Specification of harger for old ube™onnect
FLEX Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Dimensions of the old ube™.............................. 71
Dimensions of the old ube™onnect FLEX . . . . . . . . . . . . . . . . 86
TTaabbllee ooff oonntteennttss

6TK 60942-11-OP-EN
Introduction
There is nothing complicated about operating and maintaining your Thermo
King unit, but a few minutes studying this manual will be time well spent.
Performing pre-trip checks and enroute inspections on a regular basis will
minimize on-the-road operating problems. A regular maintenance program
will also help to keep your unit in top operating condition. If factory
recommended procedures are followed, you will find that you have
purchased the most efficient and dependable temperature control system
available. (see “ leaning and Maintenance” on page 38).
All service requirements, major and minor, should be handled by a Thermo
King Dealer for these very important reasons:
• They have factory trained and certified technicians
• They have genuine Thermo King replacement parts
• They are equipped with the factory recommended tools to perform all
service functions
• The warranty on your new unit is valid only when the repair and
replacement of component parts is performed by an authorized Thermo
King Dealer.
IImmppoorrttaanntt:: This manual is published for informational purposes only and
the information furnished herein should not be considered as all-
inclusive or meant to cover all contingencies. If more
information is required, consult your Thermo King Service
Directory for the location and telephone number of the local
dealer.
Customer Satisfaction Survey
Let your voice be heard!
Your feedback will help improve our manuals. The survey is accessible
through any internet-connected device with a web browser.
Scan the Quick Response (QR) code or click or type the web address to
complete the survey:
http://irco.az1.qualtrics.com/SE/?SID=SV_2octfSHoUJxsk6x

TK 60942-11-OP-EN 7
Emergency Assistance
Thermo Assistance is a multi-lingual communication tool designed to put
you in direct contact with an authorized Thermo King dealer.
Thermo Assistance should only be contacted for
breakdown and repair assistance
To use this system, you need the following information before you call:
(phone charges will apply)
• ontact Phone Number
• Type of TK Unit
• Thermostat Setting
• Present Load Temperature
• Probable ause of Fault
• Warranty Details of the Unit
• Payment Details for the Repair
Leave your name and contact number and a Thermo Assistance Operator
will call you back. At this point you can give details of the service required
and the repair will be organized.
Please note that Thermo Assistance cannot guarantee payments and the
service is designed for the exclusive use of refrigerated transporters with
products manufactured by Thermo King orporation.
IInnttrroodduuccttiioonn

8TK 60942-11-OP-EN
General Inquires and Unit Maintenance
For general inquiries please contact your local Thermo King dealer.
Go to www.europe.thermoking.com and select dealer locator for your local
Thermo King dealer.
Or refer to the Thermo King Service Directory for contact information.
Warranty
The old ube™onnect Unit Warranty is two years for parts and labour.
A full description of the warranty is available upon request.
Accessing Operator Manual Translations
This manual is available in the following languages:
English, French, Italian, German, Spanish and Turkish. Your unit comes with
English version only printed as standard. However, you can access the
translated versions at the following location:
www.emea-user-manuals.thermoking.com
You can also order a printed version of your particular manual from your
Thermo King Dealer Representative.
IInnttrroodduuccttiioonn

TK 60942-11-OP-EN 9
Section 1 - Safety Information
Danger, Warning, Caution, and Notice
Thermo King®recommends that all service be performed by a Thermo King
dealer and to be aware of several general safety practices.
Safety advisories appear throughout this manual as required. Your personal
safety and the proper operation of this unit depend upon the strict
observance of these precautions. The four types of advisories are defined as
follows:
DDAANNGGEERR
HHaazzaarrdd!!
Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WWAARRNNIINNGG
HHaazzaarrdd!!
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
AAUUTTIIOONN
HHaazzaarrdd!!
Indicates a potentially hazardous situation which, if not avoided, could
result in minor or moderate injury and unsafe practices.
NN TTIICCEE
HHaazzaarrdd!!
Indicates a situation that could result in equipment or property-damage
only accidents.

10 TK 60942-11-OP-EN
General Practices
Thermo King recommends that all services be performed by a Thermo King
dealer. However, there are several general safety practices which you should
be aware of:
IImmppoorrttaanntt:: Thermo King will not be held liable for claims for damage
resulting from the following:
• Misuse, improper installation, abnormal service, storage of
hazardous chemicals, use of corrosive substances, transit
damage, recharging of cooling system, accident, fire,
improper repair, tampering or abuse.
• Incorrect voltages or faults with regard to power supply
which falls outside of the ColdCube™ Connect operating
parameters.
DDAANNGGEERR
RRiisskk ooff IInnjjuurryy!!
Improper servicing can lead to fire, electrocution, or explosion. Never
service, repair, or troubleshoot a system unless you are a professional
service person.
WWAARRNNIINNGG
PPeerrssoonnaall PPrrootteeccttiivvee EEqquuiippmmeenntt ((PPPPEE)) RReeqquuiirreedd!!
Always wear goggles or safety glasses and proper PPE when working on a
unit. Refrigerant liquid, oil, and battery acid can permanently damage your
eyes. When working with or around hazardous chemicals, ALWAYS refer to
appropriate Material Data Safety Sheets (MSDS) and OSHA/GHS (Global
Harmonized System of lassification and Labelling of hemicals) guidelines
for information on allowable personal exposure levels, proper respiratory
protection, and handling instructions.
AAUUTTIIOONN
RRiisskk ooff IInnjjuurryy!!
Thermo King Multi-Temperature SPE TRUM truck condensing units and
SPE TRUM remote evaporators are shipped with a 35–69 kPa (5–10 psi)
holding charge of nitrogen. This holding charge may be safely vented into
the atmosphere by carefully removing the ORS caps from the condensing
unit and unsoldering the caps from the evaporators. Always wear googles
or safety glasses when removing the refrigeration tubing caps.
SSeeccttiioonn 11 -- SSaaffeettyy IInnffoorrmmaattiioonn

TK 60942-11-OP-EN 11
NN TTIICCEE
hhiillddrreenn!!
Do not let children to tamper with the unit. The unit is not intended for use
by young children unless they have been adequately supervised by a
responsible person to ensure they can use it safely.
NN TTIICCEE
EEqquuiippmmeenntt DDaammaaggee!!
Do not operate the unit if it is visibly damaged.
NN TTIICCEE
EEqquuiippmmeenntt DDaammaaggee!!
The old ube™ onnect is not suitable for transporting caustic materials or
materials containing solvents. Food may transported in its original
packaging or in suitable containers.
NN TTIICCEE
EEqquuiippmmeenntt DDaammaaggee!!
Do not place any electrical devices inside the cooling container.
NN TTIICCEE
EEqquuiippmmeenntt DDaammaaggee!!
Set up the old ube™ onnect in a dry location where it is protected
against splashing water. Protect the old ube™ onnect and the cable
against rain and moisture.
NN TTIICCEE
EEqquuiippmmeenntt DDaammaaggee!!
Risk of overheating! Do not place old ube™ onnect near open flames or
other heat sources (heaters, direct sunlight, gas ovens etc.). Always make
sure there is sufficient ventilation so that heat generated during normal
operation can dissipate. Make sure the ventilation slots are not covered.
Leave at least 2 inches (50 mm) from top and around the old ube™
onnect to ensure adequate ventilation. Never immerse the old ube™
onnect in water. Do not fill the inner container with ice or fluid.
SSeeccttiioonn 11 -- SSaaffeettyy IInnffoorrmmaattiioonn

12 TK 60942-11-OP-EN
Electrical Hazards
DDAANNGGEERR
HHaazzaarrddoouuss VVoollttaaggee!!
Risk of fatal injury from electric shocks! Do not touch exposed cables with
your bare hands. This especially applies when operating the old ube™
onnect from an A power supply.
DDAANNGGEERR
HHaazzaarrddoouuss VVoollttaaggee!!
Risk of fatal injury from electric shocks! When using the old ube™
onnect on boats, if the old ube™ onnect is powered by 110-240 VA ,
verify the power supply has a residual current circuit breaker. heck if the
voltage specification on the type plate is the same as that of the power
supply.
Only connect the old ube™ onnect as follows:
• with the 12/24 V connection cable included with the old ube™ onnect
to a 12/24 V battery.
• or, with the 110-240 V connection cable included with the old ube™
onnect to the 110-240 VA supply.
If the cable is damaged, it must be replaced to prevent possible electrical
hazards.
Disconnect the connection cable before cleaning and maintenance, after
use and before changing a fuse.
WWAARRNNIINNGG
HHaazzaarrddoouuss VVoollttaaggee!!
Treat all wires and connections as if they were high voltage until a meter
and wiring diagram indicate otherwise. Only use tools with insulated
handles. Never hold uninsulated metal tools near exposed, energized
conductors. If there is a risk of energized electrical contact, arc, or flash,
technicians MUST put on all PPE in accordance with OSHA, NFPA 70E, or
other local, state, or country-specific requirements for arc flash protection
PRIOR to servicing the unit. NEVER PERFORM ANY SWIT HING,
DIS ONNE TING, OR VOLTAGE TESTING WITHOUT PROPER ELE TRI AL
PPE AND AR FLASHING LOTHING. ELE TRI AL METERS AND
EQUIPMENT MUST BE PROPERLY RATED FOR INTENDED VOLTAGE.
SSeeccttiioonn 11 -- SSaaffeettyy IInnffoorrmmaattiioonn

TK 60942-11-OP-EN 13
WWAARRNNIINNGG
LLiivvee EElleeccttrriiccaall oommppoonneennttss!!
ontrol circuits used in your equipment are low voltage (12 or 24 VD ). The
voltage is not dangerous but the large amount of electric current
(amperage) from alternator and battery can cause severe burns if
accidentally shorted to ground with metal objects, such as tools. Do not
wear jewelry, watches, or rings because they increase the risk of shorting
out electrical circuits and damaging the equipment or causing severe burns.
WWAARRNNIINNGG
RRiisskk ooff IInnjjuurryy!!
The unit power plug must be clean and dry before connecting it to a power
source.
WWAARRNNIINNGG
HHaazzaarrddoouuss VVoollttaaggee!!
Never work alone on high voltage circuits in the refrigeration unit. Another
person should be nearby to shut off the unit and provide aid in the event of
an accident. If there is a risk of energized electrical contact, arc, or flash,
technicians MUST put on all PPE in accordance with OSHA, NFPA 70E, or
other local, state, or country-specific requirements for arc flash protection
PRIOR to servicing the unit. NEVER PERFORM ANY SWIT HING,
DIS ONNE TING, OR VOLTAGE TESTING WITHOUT PROPER ELE TRI AL
PPE AND AR FLASHING LOTHING. ELE TRI AL METERS AND
EQUIPMENT MUST BE PROPERLY RATED FOR INTENDED VOLTAGE.
WWAARRNNIINNGG
HHaazzaarrddoouuss VVoollttaaggee!!
Danger of electrocution! Disconnect the connection cable before you
replace the old ube™ onnect fuse.
WWAARRNNIINNGG
PPeerrssoonnaall PPrrootteeccttiivvee EEqquuiippmmeenntt ((PPPPEE)) RReeqquuiirreedd!!
In the event of an electrical accident, all required PPE should be near the
work area in accordance with OSHA, NFPE 70E, or other local, state, or
country-specific requirements for a ategory 2 risk.
SSeeccttiioonn 11 -- SSaaffeettyy IInnffoorrmmaattiioonn

14 TK 60942-11-OP-EN
WWAARRNNIINNGG
RRiisskk ooff IInnjjuurryy!!
Do not make rapid moves when working on high voltage circuits in
refrigeration units. Do not grab for falling tools because you might
accidentally touch a high voltage source.
NN TTIICCEE
EEqquuiippmmeenntt DDaammaaggee!!
Disconnect your equipment and all other electric devices from the battery
before you connect the battery to a quick charging device. Over-voltage can
damage the electronics of your equipment.
SSeeccttiioonn 11 -- SSaaffeettyy IInnffoorrmmaattiioonn

TK 60942-11-OP-EN 15
First Aid
RREEFFRRIIGGEERRAANNTT
•EEyyeess:: For contact with liquid, immediately flush eyes with large amounts
of water and get prompt medical attention.
•SSkkiinn:: Flush area with large amounts of warm water. Do not apply heat.
Remove contaminated clothing and shoes. Wrap burns with dry, sterile,
bulky dressing to protect from infection. Get prompt medical attention.
Wash contaminated clothing before reuse.
•IInnhhaallaattiioonn:: Move victim to fresh air and use ardio Pulmonary
Resuscitation ( PR) or mouth-to-mouth resuscitation to restore
breathing, if necessary. Stay with victim until emergency personnel
arrive.
•FFrroosstt BBiittee:: In the event of frost bite , the objectives of First Aid are to
protect the frozen area from further injury, warm the affected area
rapidly, and to maintain respiration.
RREEFFRRIIGGEERRAANNTT OOIILL
•EEyyeess:: Immediately flush with large amounts of water for at least 15
minutes. Get prompt medical attention.
•SSkkiinn:: Remove contaminated clothing. Wash thoroughly with soap and
water. Get medical attention if irritation persists.
•IInnhhaallaattiioonn:: Move victim to fresh air and use ardio Pulmonary
Resuscitation ( PR) or mouth-to-mouth resuscitation to restore
breathing, if necessary. Stay with victim until emergency personnel
arrive.
•IInnggeessttiioonn:: Do not induce vomiting. Immediately contact local poison
control center or physician.
EENNGGIINNEE OOOOLLAANNTT
•EEyyeess:: Immediately flush with large amounts of water for at least 15
minutes. Get prompt medical attention.
•SSkkiinn:: Remove contaminated clothing. Wash thoroughly with soap and
water. Get medical attention if irritation persists.
•IInnggeessttiioonn:: Do not induce vomiting. Immediately contact local poison
control center or physician.
BBAATTTTEERRYY AA IIDD
Under normal usage, the Ni-MH batteries are hermetically sealed. In case of
accident, perform the following instructions:
SSeeccttiioonn 11 -- SSaaffeettyy IInnffoorrmmaattiioonn

16 TK 60942-11-OP-EN
•EEyyeess:: Immediately flush with large amounts of water for at least 15
minutes. Get prompt medical attention. Wash skin with soap and water.
•IINNHHAALLAATTIIOONN:: Provide fresh air. Rinse mouth and nose with water. Seek
immediate medical assistance.
•SSKKIINN OONNTTAA TT:: Immediately remove contaminated clothing. Wash skin
with large volumes of water, for at least 15 minutes. Wash skin with soap
and water. Do not apply fatty compounds. Seek immediate medical
assistance.
•IINNGGEESSTTIIOONN:: If the injured person is fully conscious: make the person
drink extensive amounts of milk. Do not induce vomiting. Take the
injured person immediately to a hospital.
EELLEE TTRRII AALL SSHHOO KK
Take IMMEDIATE action after a person has received an electrical shock. Get
quick medical assistance, if possible.
The source of the shock must be quickly stopped, by either shutting off the
power or removing the victim. If the power cannot be shut off, the wire
should be cut with an non-conductive tool, such as a wood-handle axe or
thickly insulated cable cutters. Rescuers should wear insulated gloves and
safety glasses, and avoid looking at wires being cut. The ensuing flash can
cause burns and blindness.
If the victim must be removed from a live circuit, pull the victim away with a
non-conductive material. Use wood, rope, a belt or coat to pull or push the
victim away from the current. DO NOT TOU H the victim. You will receive a
shock from current flowing through the victim’s body. After separating the
victim from power source, immediately check for signs of a pulse and
respiration. If no pulse is present, start ardio Pulmonary Resuscitation
( PR). If a pulse is present, respiration might be restored by using mouth-to-
mouth resuscitation. all for emergency medical assistance.
AASSPPHHYYXXIIAATTIIOONN
Move victim to fresh air and use ardio Pulmonary Resuscitation ( PR) or
mouth-to-mouth resuscitation to restore breathing, if necessary. Stay with
victim until emergency personnel arrive.
SSeeccttiioonn 11 -- SSaaffeettyy IInnffoorrmmaattiioonn

TK 60942-11-OP-EN 17
Section 2 - Unit Description
Thermo King old ubeTM onnect cooling containers are the flexible and
convenient solution for transportation of perishable goods in cars, trucks or
vans. The heavy duty old ubeTM onnect is made of rotationally moulded
polyethylene and can be cleaned easily according to 93/43/EE (HA P).
• Operating voltage is 12/24 V D and 110-140 V A , 50-60 Hz for the
optional A connection.
• The refrigerant gas is F free R134a R404a.
• The digital temperature controller allows easy setting of the internal
temperature.
Figure 1 ColdCubeTM Connect
BED639
There are sixteen old ube™onnect models available:
• 32 Litre in freezing
• 32 Litre in freezing and heating (Pharma)
• 82 Litre in freezing
• 82 Litre in freezing and heating (Pharma)

18 TK 60942-11-OP-EN
• 140 Litre in cooling
• 140 Litre in cooling and heating
• 140 Litre in freezing
• 140 Litre in freezing and heating (Pharma)
• 330 Litre in cooling
• 330 Litre in cooling and heating
• 330 Litre in freezing
• 330 Litre in freezing and heating (Pharma)
• 720 Litre in cooling
• 720 Litre in cooling and heating
• 720 Litre in freezing
• 720 Litre in freezing and heating (Pharma)
SSeeccttiioonn 22 -- UUnniitt DDeessccrriippttiioonn

TK 60942-11-OP-EN 19
Section 3 - Specifications
ColdCubeTM Connect Style
ColdCubeTM
Connect Style
Gross
Ca-
pacity
(Li-
tres)
Mini-
mum
Temp
(a)
Max
Amps @
12 VDC
(b)
External
Dimensions
L x W x H
(mm)
Internal
Dimensions
L x W x H
(mm)
Weig-
ht
(kg)
Freezing 32 - 24°C 9 A 670 x 390 x
480
327 x 223 x
344 22,5
Freezing &
Heating
(Pharma)
32 - 24°C 9 A 670 x 390 x
480
327 x 223 x
344 22,5
Freezing 82 - 24°C 9 A 940 x 560 x
551
523 x 358 x
366 35
Freezing &
Heating
(Pharma)
82 - 24°C 9 A 940 x 560 x
551
523 x 358 x
366 35
Cooling 140 - 10°C 10 A 1000 x 620 x
710
620 x 369 x
510 52
Cooling &
Heating 140 - 10°C 10 A 1000 x 620 x
710
540 x 369x
510 54
Freezing 140 - 21°C 18 A 1000 x 620 x
710 590 x 369 510 55
Freezing &
Heating
(Pharma)
140 - 21°C 18 A 1000 x 620 x
710
520 x 369 x
510 57
Cooling 330 0°C 10 A 1020 x 1000 x
1000
810 x 550 x
660 80
Cooling &
Heating 330 0°C 10 A 1020 x 1000 x
1000
730 x 550 x
660 83
Freezing 330 - 21°C 18 A 1020 x 1000 x
1000
780 x 550 x
660 83
Freezing &
Heating
(Pharma)
330 -21°C 18 A 1020 x 1000 x
1000
710 x 550 x
660 86
Cooling 720 0°C 20 A 1400 x 1100 x
1100
1020 x 850 x
780 144
Cooling &
Heating 720 0°C 20 A 1400 x 1100 x
1100
940 x 850 x
780 147
Freezing 720 - 24°C 32 A 1400 x 1100 x
1100
980 x 850 x
780 150
Freezing &
Heating
(Pharma)
720 -24°C 32 A 1400 x 1100 x
1100
910 x 850 x
780 153

20 TK 60942-11-OP-EN
(a) At ambient temperature of 30°C
(b) Divide by 2 to get 24 VDC Amps; divide by 10 to get 120 VAC Amps
Fuse Sizes
• 32 Litre in freezing: 16 A
• 32 Litre in freezing and heating (Pharma): 16 A
• 82 Litre in freezing: 25 A
• 82 Litre in freezing and heating (Pharma): 25 A
• 140 Litre in cooling: 30 A
• 140 Litre in cooling and heating: 30 A
• 140 Litre in freezing: 50 A
• 140 Litre in freezing and heating (Pharma): 50 A
• 330 Litre in cooling: 30 A
• 330 Litre in cooling and heating: 30 A
• 330 Litre in freezing: 30 A
• 330 Litre in freezing and heating (Pharma): 30 A
• 720 Litre in cooling: 50 A
• 720 Litre in cooling and heating: 50 A
• 720 Litre in freezing: 50 A
• 720 Litre in freezing and heating (Pharma): 50 A
SSeeccttiioonn 33 -- SSppeecciiffiiccaattiioonnss