Thermo-Star Steam Ironing Station User manual

User manual
Thermostar
Steam Ironing Station

2
1. Grip recess
2. Heatable ironing surface
3. Flexible cord antenna
4. Work surface for ironing
5. Power connection
6. Power cord
7. Rollers
8. Adjustable rubber bases
9. Frame
10. Fan for suction
and blowing functions
11. Lever for height adjustment
12. Power on/off switch for heating
13. a. Switch for continuous or
interrupted suction and
blowing functions
b. Switch for shitfting between
suction and blowing functions
Dispose this appliance separated from household waste at the
disposal points for electrical and electronic equipment
(as per the WEEE directive of the EU)
Technical data
Cord length
approx. 3,5 m
Voltage
230 V
Frequency
50 Hz
Weight
approx. 13 kg
Total power
Fan power
Heater power
240 W
40 W
200 W
1
2
3
4
5
6
7
8
9
10 11
12 13a 13b

3
Proper use
The Thermostar Steam Ironing Station is meant for usage
with the Thermostar Dry Steam Cleaner and and Thermostar
Steam Iron, which is available separately.
It is only suitable for ironing clothes.
No liability is assumed for damages caused
by improper use or incorrect operation.
Before the first use
Please ensure that all packaging material has been removed
from the steam ironing station.
Safety instructions
Avoid contact with current-carrying elements of the steam ironing station.
Do not leave the iron unattended while it is in operation.
Ensure that the ironing station is not reachable by children who are unattended.
Use the ironing station only on a flat and stable base.
Let the ironing station cool down completely before being put away.
The steam ironing station may not be used by children or persons with
limited physical or psychological abilities.
Please do not use if the ironing station or the cord have obvious damages.
Contact your dealer in this case.
Disconnect the ironing station from the power supply when it is not in use or
has a defect.

4
Installation of Thermostar Steam Ironing Station
Place your ironing station firstly without being plugged in, and on a dry, stable
and straight base.
Keep the ironing station horizontally on the floor and fix the frame
with your left foot on the floor.
Activate the lever for the height adjustment and open
the frame simultaneously.
Release the lever for the height adjustment and snap the frame into place.
By further activation of the lever for the height adjustment,
you can set it to the required working height.
Insert the power cord in a suitable socket. While inserting,
pay attention that the power cord is not placed in the way such
that it becomes a tripping hazard.
While installing and connecting Thermostar Steam Ironing Station,
follow its user manual.
During the ironing process, the heating function of the
ironing station must always be activated. The power on/off
switch glows, if it is activated by choosing Position 1. The
activation of the heating function simultaneously switches
on the suction and blowing functions.
You can choose between continuous and interrupted
(automatic) suction and blowing functions.
In case of an interrupted (automatic) function, the fan works
only when the ironing does not take place on the work
surface intended.
Ironing with Thermostar Steam Ironing Station

5
Depending on the
characteristics of the clothes,
the switching between suction
and blowing functions is useful.
Use the blowing function mainly
for light materials like silk,
in order to avoid unwanted
wrinkles or imprints of knobs
and seams.
When the ironing process ends, please activate the heating function in
combination with the continuous suction function for some minutes
to dry the surface completely.
Turn the power on/off switch of the heating function to Position 0 and then
disconnect the steam ironing station from the power supply as well as the
iron. Note that the iron can still be hot and cause burns!
Let your ironing station cool down completely before you put it away.
For putting it away, fix the frame to the rollers with your foot.
Activate the lever for height adjustment and lower the ironing board
simultaneously with both hands, till the ironing station lies
horizontally on the floor again.
When the ironing station is completely shut, release the lever for height
adjustment so that it can snap in place.
You can pull the board to the adjustable base and roll it to the required
storage place. Always place it on the fixed adjustable base to store it.
Putting Thermostar Steam Ironing Station away

6
The Thermostar Steam Iron and the Teflon sole, along with
Thermostar Dry Steam Cleaner, complete your professional
ironing equipment.
These products are optimally matched to each other
and ensure you a sensational ironing experience.
Clean the plastic materials and metal parts of your Thermostar Ironing Board
regularly with a wet, soft cloth.
The ironing board lining can be washed at 30 degree Celsius.
It consists of a special heat - resistant material, which optimizes the use with
the heating and suction functions.
Therefore, use only the original Thermostar lining!
Store the ironing board in a dry place, the temperature should
not fall below 5 degree Celsius.
If your equipment is malfunctioning, please contact your Thermostar dealer
immediately to discuss the further course of action.
Thermostar Steam Iron
Accessoires
Cleaning and maintenance
Malfunctioning and service

7

Thermostar Handels-GmbH
Auen-Süduferstraße 67
9220 Velden
Tel.: [phone]
[email protected]
www.thermostar.info
FOGADBST011809EN10