Thinklogical OriginKVM 3125 User manual

Page ii
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Copyright Notice
Copyright © 2018. All rights reserved. Printed in the U.S.A.
Thinklogical, A BELDEN BRAND
100 Washington Street
Milford, Connecticut 06460 U.S.A.
Telephone: [phone]
All trademarks and service marks are the property of their respective owners.
Subject: OriginKVM 3125 Product Manual
Revision: B, January, 2018
®
MADE IN USA
Website: www.thinklogical.com
Facebook: www.facebook.com/ThinklogicalUSA
LinkedIn: www.linkedin.com/company/thinklogical
Google+: http://plus.google.com/u/0/109273605590791763795/about
YouTube: www.youtube.com/user/thinklogicalNA
Twitter: @thinklogical

Page iii
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Table of Contents
PREFACE............................................................................................................................................... iv
About Thinklogical®............................................................................................................................iv
About This Product Manual................................................................................................................ v
Note and Warning Symbols........................................................................................................... v
Class 1 Laser Information.............................................................................................................. v
SECTION 1: SYSTEM FEATURES.........................................................................................................1
OriginKVM 3125 Technical Specifications ........................................................................................2
SECTION 2: SET-UP AND INSTALLATION...........................................................................................3
Contents...........................................................................................................................................3
Rack-Mount or Desktop Options.......................................................................................................4
Supplied Cables ...............................................................................................................................4
Installation........................................................................................................................................5
Console Connections ...................................................................................................................5
CPU 1 through 3 Port Connections...............................................................................................5
Firmware Updates ............................................................................................................................5
SECTION 3: REGULATORY & SAFETY REQUIREMENTS...................................................................6
Symbols Found on Our Products .......................................................................................................6
Regulatory Compliance......................................................................................................................6
North America..............................................................................................................................6
Australia & New Zealand..............................................................................................................6
European Union ...........................................................................................................................6
Declaration of Conformity.........................................................................................................6
Standards to Which Our Products Comply........................................................................................6
Supplementary Information...............................................................................................................7
Product Serial Number.................................................................................................................7
Connection to the Product............................................................................................................7
SECTION 4: THINKLOGICAL SUPPORT...............................................................................................8
How to Contact Us.............................................................................................................................8
Customer Support..............................................................................................................................8
Website........................................................................................................................................8
Email............................................................................................................................................8
Telephone....................................................................................................................................8
Fax...............................................................................................................................................9
Product Support................................................................................................................................9
Warranty.......................................................................................................................................9
Return Authorization.....................................................................................................................9
Our Addresses ...........................................................................................................................10
APPENDIX A: OriginKVM 3125 Quick Start Guide.............................................................................11
APPENDIX B: OriginKVM 3125 Front Panel LCDs............................................................................. 12
APPENDIX C: Out Of Band (OOB) Control for Apple Keyboard users.............................................13
MADE IN USA

Page iv
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
PREFACE
About Thinklogical A BELDEN BRAND
Thinklogical, a Belden brand, is the leading manufacturer and provider of fiber optic and
CATx KVM, video, audio, and peripheral extension and switching solutions used in video-rich,
big-data computing environments.
Thinklogical offers the only fiber-optic KVM matrix switches in the world that are
accredited to the Common Criteria EAL4, TEMPEST SDIP 24 Level B, and NATO
NIAPC Evaluation Scheme: GREEN and the U.S. DoD DISA JITC UCR 2013 APL
information assurance standards. And Thinklogical Velocity products are the first
system with both KVM and video matrix switching capabilities to be placed on the
Unified Capabilities Approved Product List (UC APL) under the Video Distribution
System (VDS) category.
Governments, entertainment, scientific and industrial customers worldwide rely on
Thinklogical’s products and solutions for secure, high performance, continuous operation and
ease of integration. Thinklogical products are designed and manufactured in the USA and are
certified to the ISO 9001:2008 standard.
Thinklogical is headquartered in Milford, Connecticut and is owned by Belden, Inc., St. Louis,
MO (http://www.belden.com). For more information about Thinklogical products and
services, please visit www.thinklogical.com.
Follow Thinklogical on LinkedIn at http://www.linkedin.com/company/thinklogical,
on Facebook at http://www.facebook.com/ThinklogicalUSA,
and on Twitter at https://twitter.com/thinklogical.

Page v
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
About this Product Manual
This product manual is divided into four sections and includes a Table of Contents and Appendices.
Section 1 –System Features:Pg. 1. Details the features and functions of your equipment.
Section 2 –Set-Up and Installation:Pg. 3. Contains all the requirements and procedures
necessary to connect and install your equipment.
Section 3 –Safety & Regulatory Requirements:Pg. 6. Thinklogical®strongly recommends that
you read this section prior to starting the hardware assembly.
Section 4 –Thinklogical Support: Pg. 8. Thinklogical provides the best customer support in the
industry. If you have any questions or need to contact us for any reason, please refer to this section
of the manual.
Note and Warning Symbols
Throughout this manual you will notice certain symbols that bring your attention to important information.
These are Notes and Warnings. Examples are shown below.
Note: Important Notes appear in blue text, preceded by a yellow exclamation point
symbol, as shown here.
A note is meant to call the reader’s attention to helpful or important information at a point in the text
that is relevant to the subject being discussed.
Warning! All Warnings appear in red text, followed by blue text, and preceded by a red
stop sign, as shown here.
A warning is meant to call the reader’s attention to critical information at a point in the text that is
relevant to the subject being discussed.
Class 1 Laser Information
Many Thinklogical ® products are designed and identified as Class 1 LASER products. This means the
maximum permissible exposure (MPE) cannot be exceeded when viewing the laser with the naked eye
or with the aid of typical magnifying optics (e.g. telescope or microscope).
CLASS 1 LASERS do not require any special
precautions under conditions of normal use.
SFP
Modules
Fiber-Optic
Cables
Class 1 Lasers

Page 1
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Section 1: System Features
The Thinklogical®OriginKVM 3125 is a high performance KVM Switch that enables one
user station to access and switch between three multi-platform servers or computers.
Each input can distribute two dual-link signals to dual-link monitors and can also distribute two
single-link resolution signals to single-link monitors.
The OriginKVM 3125 improves operational productivity from the simplest to the most
complex requirements for applications such as hardware/software development, test labs,
network server management and multi-work-station operations.
The OriginKVM 3125 is a 3 computer/1 user KVM switch that supports 2 dual-link DVI
video channels, RS232, line level audio for speakers, USB HID devices and a USB 2.0
port. Switching is performed by hotkeys or by using the out-of-band control menu, either on the
front panel or with the provided Remote Control Unit, connected by a CAT5 Cable. Video 1
and USB HID (Human Interface Device) are always switched simultaneously, while Video 2,
Audio, RS232, and USB 2.0 can be switched individually. This convenience allows the transfer
of large amounts of data between a computer and storage device, while maintaining the user
interface of a different computer.
The USB HID ports emulate a keyboard and mouse so that the connected computers do not
need to re-acquire their capabilities each time a switch is made, so they are immediately
available upon switching. The USB HID port supports many USB touch-screens and tablets.

Page 2
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Each OriginKVM 3125 system includes the following features:
•Supports 2 video channels, either single-link or dual-link
•Supports USB HID devices such as keyboards, mice, tablets and touch-screens
•Dedicated USB 2.0 port
•Internal universal power supply
•Switching via front panel buttons, hotkeys or OOB (Out Of Band) control menu
•Switching can also be done with the provided RJ45 Remote Control Unit
RJ45 Remote Control Unit
Caution! Replace with same type and rating fuse.
100-240V ~, 0.5A, 50/60 Hz T 2A, 250 VAC
USE ONLY WITH 250V FUSE
HOST
CNTRL
U
P
D
A
T
E
S
REMOTE
USB HID USB 2.0
DVI IN 2 DUAL LINK
DVI IN 1 DUAL LINK LINE IN
CPU 1
RS232 DVI IN 2 DUAL LINK
DVI IN 1 DUAL LINK LINE IN
CPU 2
RS232 DVI IN 2 DUAL LINK
DVI IN 1 DUAL LINK LINE IN
CPU 3
RS232 DVI IN 2 DUAL LINK
DVI IN 1 DUAL LINK LINE OUT
USER
RS232
Rear Panel of the OriginKVM 3125 Switch (KVM-003125).
OriginKVM 3125 Technical Specifications
Storage Temperature
-20 to 70°C (-4 to 158°F), 10 to 90% RH, non-condensing
Power Supply Voltage
100 to 240 VAC, 50/60 Hz
Power Consumption
10 Watts, typical
Heat Dissipation
34 BTUs per hour
Panel Connectors
Dual-Link Video Ports DVI (6)
USB Keyboard/Mouse USB B (3)
Audio Input 3.5mm (3)
Video for User Display DVI (2)
Keyboard/Mouse
& USB 2.0 Devices USB A (4)
Audio Output 3.5mm (1)
Remote Control RJ45F (1)
Operating Temperature & Humidity
0 to 50 °C (32 to 122 °F); 5 to 95% RH, non-condensing

Page 3
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Enclosure Dimensions
17.640” wide x 14.170” deep x 1.720” high (Standard 19”rack, 1RU)
(448.06mm x 359.92mm x 43.69mm)
(Tolerance: ± .039”; .100cm)
Weight
4 lbs (1.81 kg)
Shipping Weight
16 lbs (7.26 kg)
Copper Cables
(supplied with unit)
(4) 3.5mm Male to Male Plug, 6FT
Thinklogical Part Number: CBL000016-006FR
(4) USB Type A to USB Type B Cable, 6 Feet
Thinklogical Part Number: CBL000015-006FR
(8) DVI Dual-Link Male to Male Cable, 2 Meters
Thinklogical Part Number: CBL000023-002MR
(1) RJ45 Male to Male CAT5 Cable, 2 Meters
Thinklogical Part Number: CBL000001-002MR
Compliance
Approvals for US, Canada, and European Union
Warranty
12 months from date of shipment. Extended warranties available.
Section 2: Set-Up & Installation
Contents
When you receive your Thinklogical®OriginKVM 3125, you should find the following items in the
quantities specified in your order:
•OriginKVM 3125 Switch –KVM-003125
•AC Power Cord –PWR-000006-R (International connections may differ)
•OriginKVM 3125 Cables (Audio, USB, CAT5, DVI Dual-Link) as listed below
•OriginKVM 3125 Product Manual
•RJ45 Remote Control Unit
Carefully remove the chassis from its shipping package and inspect it to make certain that it is
in good condition. All physical connections to the product use industry-standard connectors. All
connections are found on the rear panel of the unit.
POWER
ON/OFF
CONSOLE OUTPUTS
CPU IN 1 CPU IN 2 CPU IN 3

Page 4
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Rack-Mount or Desktop Options
Note: Whether mounting the chassis in a rack or on a desktop, insure that air flow to the
fans is not restricted (minimum 2” of free space on all sides. Units can be stacked,
maximum 4 units per stack).
Supplied Cables
3.5mm to 3.5mm Audio Cable, 6 Feet (CBL000016-006FR) –Qty 4
3.5mm 3.5mm
USB A-B Cable, 6 Feet (CBL000015-006FR) –Qty 4
USB B USB A
DVI-D Dual-Link, 2 Meters (CBL000023-002MR) –Qty 8
DVI Male DVI Male
RJ45M to RJ45M CAT5, 6 Feet (CBL000001-002M) –Qty 1
RJ45 RJ45

Page 5
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Installation
Console Connections:
1. Ensure the CPUs are turned OFF. Complete steps 2-8 first.
2. Connect an AC Power Cord to the OriginKVM 3125 and turn the unit ON.
3. Plug DVI Dual-Link Displays 1-2 into the DVI ports labeled DVI OUT Dual-Link 1 and
2. To read DDC Tables, see Appendix B (pg. 12) Front Panel LCDs. Apple Keyboard
users, also see Appendix C on pg. 13.
4. Connect up to 3 USB HID devices (such as keyboard, mouse, tablet, etc.) and one
USB 2.0 device to the four USB A ports. (USB 2.0 devices and devices that are not
HID must be connected to the port marked USB 2.0.) Connect your speakers or other
audio output device into the 3.5mm port labeled AUDIO OUT. Connect an RJ45 cable
from the chassis to the remote control unit.
CPU 1 through 3 Port Connections:
5. Connect the included Dual-Link DVI cables (CBL000023-002MR) from the CPU 1
DVI Video Cards to the OriginKVM 3125’s DVI IN Dual-Link IN 1 and 2.
6. Connect the included USB A to USB B cable (CBL000015-006FR) from the CPU 1
USB Keyboard/Mouse Port to the OriginKVM 3125’s USB B IN from CPU 1 Port.
7. Connect the included 3.5mm to 3.5mm cable (CBL000016-006FR) from the CPU 1
Audio Output to the OriginKVM 3125’s 3.5mm Audio IN from CPU 1 Port.
8. Repeat Steps 1-3 for CPUs 2 and 3, and then turn the CPUs ON.
Ensure that all system functions are operating properly.
Firmware Updates
Firmware updates are available through Thinklogical®. For technical assistance, please call us at
1-203-647-8700.

Page 6
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Section 3: Regulatory & Safety Requirements
Symbols found on the product
Markings and labels on these products follow industry-standard conventions. Regulatory markings found
on these products comply with domestic and many international requirements.
Regulatory Compliance
Thinklogical’s®products are designed and made in the U.S.A. These products have been tested by a
certified testing laboratory and found to be compliant with the following standards (both domestic USA
and many international locations):
North America
These products comply with the following standards:
Safety
•ANSI/UL60950-1: 1st Edition (2003)
•CAN/CSA C22.2 No. 60950-1-03
Electromagnetic Interference
•FCC CFR47, Part 15, Class A
•Industry Canada ICES-003 Issue 2, Revision 1
Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference, in which
case the user may be required to take corrective measures.
European Union
Declaration of Conformity
Manufacturers name and address:
Thinklogical, A BELDEN BRAND
100 Washington Street
Milford, Connecticut 06460 USA
Product name: OriginKVM 3125
This product complies with the requirements of the Low Voltage Directive 72/23/EEC and the EMC
Directive 89/336/EEC.
Standards to Which Our Products Comply
Safety
•CENELEC EN 60950-1, 1st Edition (2001)
Electromagnetic Emissions
•EN55022: 1994 (IEC/CSPIR22:1993)
•EN61000-3-2/A14:2000
•EN61000-3-3:1994
Electromagnetic Immunity
•EN55024:1998 Information Technology Equipment-Immunity Characteristics
•EN61000-4-2:1995 Electro-Static Discharge Test
•EN61000-4-3:1996 Radiated Immunity Field Test
•EN61000-4-4:1995 Electrical Fast Transient Test
•EN61000-4-5:1995 Power Supply Surge Test
•EN61000-4-6:1996 Conducted Immunity Test
•EN61000-4-8:1993 Magnetic Field Test
•EN61000-4-11:1994 Voltage Dips & Interrupts Test

Page 7
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Supplementary Information
The following statements may be appropriate for certain geographical regions and might not apply to
your location.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil num
é
rique de la classe A respecte toutes les exigencies du R
è
glement sur le mat
é
rial
brouilleur du Canada.
Warning! This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take corrective measures.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications in which case the user
may be required to take adequate corrective measures at their own expense.
Note: This Class A digital apparatus complies with Canadian ICES-003 and has been
verified as being compliant within the Class A limits of the FCC Radio Frequency Device
Rules (FCC Title 47, Part 15, Subpart B CLASS A), measured to CISPR 22: 1993 limits and
methods of measurement of Radio Disturbance Characteristics of Information
Technology Equipment.
Note: The user may notice degraded audio performance in the presence of electro-
magnetic fields .
Product Serial Number
Thinklogical products have a unique serial number printed on a label affixed to the bottom of the chassis.
The serial number includes a date-code, formatted as two digits for the month; two digits for the day,
two digits for the year and two or three digits for a unique unit number. For example:
102117306 indicates the unit was built in the 10th month, on the 21st day, in the year 2017 and is unit
number 306. This serial number is also found on the original shipping carton.
Connection to the Product
Connections and installation hardware for our products use industry-standard devices and
methods. All wiring connections to the customer equipment are designed to minimize proprietary or
customized connectors and cabling. Power connections are made with regionally appropriate power
cords and approved methods.

Page 8
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Section 4: Thinklogical Support
Customer Support
Thank you for choosing Thinklogical® products for your application.
We appreciate your business and are dedicated to helping you successfully use our products.
is always here to help you.
To contact us, please use the following telephone numbers and internet-based methods:
®
Thinklogical®is an engineering company and we will always do our best to ensure that you
receive any assistance you need directly from our most knowledgeable engineers.
We believe that the first line of support comes from the design
engineers that developed each particular product.
Therefore, your questions or issues will be handled promptly by our in-house engineers who are most
familiar with your products. We won’t be satisfied until you are satisfied.
Website
Check out our website at www.thinklogical.com for current products, support documents and useful
information about all of the products and services we offer, including technical specification sheets,
quick-start guides and product manuals (for viewing online or for download).
Note: Most online documents are stored as Adobe Acrobat “PDF” files. If you do not have
the Adobe Acrobat reader needed to view PDF files, visit www.adobe.com for a download.
Email
Thinklogical®is staffed Monday through Friday from 8:30am to 5:00pm, Eastern Time Zone. We will
do our best to respond to your email inquiries promptly. Please use the following email addresses:
[e-mail] –Information on Thinklogical®and our products.
[e-mail] –Sales Department - orders, questions or issues.
[e-mail] –Product support, technical issues or questions, product
repairs and request for Return Merchandise Authorization.
Telephone
Thinklogical Operator 1-203-647-8700
Product & Customer Support: 1-203-647-8798
US Commercial & Canada Sales: 1-203-647-8715
US Federal Government Sales: 1-203-647-8716
Toll Free in the Continental US: 1-800-291-3211
International Sales (Europe, Middle East, Africa): 1-203-647-8704
International Sales (Asia Pacific, Central & Latin America): 1-203-647-8734

Page 9
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Please contact our expert sales staff in Milford, CT. We are here Monday through Friday from 8:30am to
5:00pm, Eastern Time Zone. We’ll provide a representative’s direct dial phone number when you call.
If leaving a voice message, please provide a preferred time to call back so we may reach you at your
convenience.
Our switchboard attendant will direct your call during regular business hours. We have an automated
attendant answering our main telephone switchboard after regular business hours and holidays. Please
leave a voice message at any time.
Fax
Our company facsimile number is 1-203-783-9949. Please indicate the nature of the fax on your cover
sheet and provide return contact information.
Product Support
Thinklogical’s®support personnel are available Monday through Friday from 8:30am to 5:00pm,
Eastern Time Zone. If your application requires assistance at some time outside of our normal business
hours, please contact us beforehand and we will have someone available to assist you.
Warranty
Thinklogical warrants this product against defects in materials and workmanship for a period of one year
from the date of delivery. Thinklogical and its suppliers disclaim any and all other warranties.
Note: Thinklogical products carry a one year warranty, with longer term available at time of
purchase, on most products. Please refer to your product invoice for your product’s
Warranty Terms & Conditions.
Defect remedy shall be the repair or replacement of the product, provided that the defective product is
returned to the authorized dealer within one year from the date of delivery.
If you wish to return your device, contact the Thinklogical authorized dealer where you purchased the
device, or if you purchased directly, call Thinklogical at 1-800-291-3211 (USA).
Return Authorization
If you must return a product to Thinklogical directly, please contact Customer Support at 1-800-291-
3211 or 1-203-647-8700. Customer Support will ask you to describe the problem and will issue you a
Return Merchandise Authorization number (RMA#). Pack the device in its original box, if possible, and
return it with the RMA# printed on the outside of the box.
Note: Please DO NOT return a product to Thinklogical®without a Return Merchadise
Authorization.

Page 10
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Our Addresses
If you have any product issues or questions or need technical assistance with your Thinklogical system,
please call us at 1-800-291-3211 (USA only) or 1-203-647-8700 and let us help. If you need to write us
or return a product, please use the following address. Please include the Return Merchandise
Authorization number:
Thinklogical, A BELDEN BRAND
100 Washington Street
Milford, Connecticut 06460 USA
ATTN: RMA #
Website: www.thinklogical.com
Facebook: www.facebook.com/ThinklogicalUSA
LinkedIn: www.linkedin.com/company/thinklogical
Google+: http://plus.google.com/u/0/109273605590791763795/about
YouTube: www.youtube.com/user/thinklogicalNA
Twitter: @thinklogical
MADE IN USA

Page 11
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Appendix A: OriginKVM 3125 Quick Start Guide

Page 12
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Appendix B: OriginKVM 3125 Front Panel LCDs

Page 13
The OriginKVM 3125 Product Manual thinklogical Rev. B, January, 2018
Appendix C: Out Of Band (OOB) Control for Apple Keyboard Users
LCD System Information and Programming LCD Navigation
If using an Apple Keyboard, once the firmware has been installed into the OriginKVM 3125, use the UP
arrow on the Navigation Pad to reach *Out of Band CTRL from the main menu. Then use the
RIGHT arrow to reach User Set HOT Key Scroll Lock. If not using an Apple Keyboard, leave this
setting as it is.
enter
User
Set HOT Key Scroll Lock
To make a change from the Alt. HOT Key menu, press enter. Use the UP or DOWN arrow to
access the available hot key options:
HOT Key (F13, F14,F15, LEFT CTRL, RIGHT CTRL or R or L CTRL, Scroll Lock).
Press enter to implement the change. Each keyboard is handled separately. The user may need to
repeat the procedure for User 2.
LEFT
CONTROL RIGHT
CONTROL
F13 F14 F15
APPLE KEYBOARD
Alternate Key Strokes