Thinklogical OriginKVM 41 User manual

REVISION C MARCH 2011
OriginKVM 41
Product Manual
Extend Distribute Innovate
Thinklogical LLC
100 Washington Street
Milford, Connecticut 06460 U.S.A.
Telephone: [phone]
Fax: [phone]
www.thinklogical.com

Extend Distribute Innovate
REVISION C ii MARCH 2011
Copyright Notice
Copyright © 2011. All rights reserved. Printed in the U.S.A.
Thinklogical™, a subsidiary of Logical Solutions, LLC
100 Washington Street
Milford, Connecticut, U.S.A. 06460
Telephone [phone]
All trademarks and service marks are property of their respective owners.
Subject: OriginKVM 41, 4x1 KVM Switch
Revision: Rev C, March 2011

Extend Distribute Innovate
REVISION C iii MARCH 2011
Table of Contents
1. Introduction....................................................................................................................................3
1.1. Contents...................................................................................................................................3
1.2. Product Overview.....................................................................................................................3
2. System Features ............................................................................................................................4
2.1. General System Features.........................................................................................................4
2.2. Technical Specifications...........................................................................................................5
2.2. Product Overview.....................................................................................................................6
2.2.1. Desktop Device.................................................................................................................6
2.2.2. Convection Cooled ...........................................................................................................6
3. Connecting the OriginKVM 41.......................................................................................................6
3.1 Front Panel View: LED Indicators.............................................................................................6
3.2 Rear Panel View.......................................................................................................................7
3.3 Cables......................................................................................................................................7
3.3.1 3.5mm to 3.5mm Cable, 6 Feet (CBL000006-006FR) –Qty 4 ..............................................7
3.3.2 USB A-B Cable, 6 Feet (CBL000015-006FR) –Qty 4...........................................................7
3.3.3 HDMI to DVI, 2 Meters (CBL000030-002MR) –Qty 4...........................................................7
4. Installation......................................................................................................................................8
5. Regulatory and Safety Compliance ..............................................................................................9
5.1 Safety Requirements................................................................................................................9
5.1.1 Symbols Found on Product...................................................................................................9
5.2 Regulatory Compliance ............................................................................................................9
5.2.1 North America.......................................................................................................................9
5.2.2 Australia & New Zealand ......................................................................................................9
5.2.3 European Union....................................................................................................................9
5.2.3.1 Declaration of Conformity..............................................................................................9
5.2.3.2 Standards with Which Our Products Comply............................................................... 10
5.2.4 Supplementary Information.................................................................................................10
5.2.5 Product Serial Number .......................................................................................................11
6. How to Contact Us ....................................................................................................................... 11
6.1 Customer Support ..................................................................................................................11
6.1.1 Website ..............................................................................................................................11
6.1.2 Email ..................................................................................................................................12
6.1.3 Telephone ..........................................................................................................................12
6.1.4 Fax .....................................................................................................................................12
6.2 Product Support......................................................................................................................12
6.2.1 Warranty.............................................................................................................................12
6.2.2 Our Address .......................................................................................................................13
Appendix A: OriginKVM 41 Quick Start Guide………………………………………………………………..14
Appendix B: OriginKVM 41 Serial Port Control Protocol…………………………………………….………15

Extend Distribute Innovate
REVISION C 3 MARCH 2011
1.Introduction
1.1. Contents
When you receive your Thinklogical™OriginKVM 41, you should find the following items:
OriginKVM 41 Switch –KVM-000041
AC Power Cord –PWR-000006-R (International connections may differ)
OriginKVM 41 Cables
OriginKVM 41 Product Manual
1.2. Product Overview
The Thinklogical™ OriginKVM 41 is a high performance KVM switch that enables one user
station to access and switch between four multi-platform servers or computers. The OriginKVM
41 improves operational productivity from the simplest to the most complex requirements and
for applications such as hardware/software development, testing labs, network server
management and multi-workstation operation.
Input:
Four Multi-Platform
Servers or Computers
Output:
One Switchable
Workstation with
access to all four inputs
1
3
5
7
9
2
4
6
8
10

Extend Distribute Innovate
REVISION C 4 MARCH 2011
2.System Features
2.1. General System Features
The OriginKVM 41 is a 1-user/4-CPU switch that supports USB 2.0 up to 480 Mbps. The
OriginKVM 41 also allows the user to switch the 3.5mm line level audio along with USB 2.0 and
DVI/HDMI. In addition, video intensive applications will benefit from OriginKVM 41’s DVI and
HDMI support.
Each OriginKVM 41 system includes the following features:
Switches DVI/HDMI, USB, and Line Level Audio
IR Remote Control (optional)
Select Switches on the front panel
4-port USB hub console
USB Power, Power from DVI/HDMI and Selected Port CPU LED Indicators
BIOS level access
Plug-and-play. No configured required
Internal universal power supply (Country-specific power cables available upon request)
Uses standard IEC power cable
Supports any mix of computers –UNIX, Linux, Windows NT, Windows 2000…
RS232 Serial Port available for third party controllers*
Supports HDCP encrypted content.
Rear Panel of the OriginKVM 41 Switch (KVM-000041).
*See Appendix B on pg. 15 for Serial Port Control Protocol

Extend Distribute Innovate
REVISION C 5 MARCH 2011
2.2. Technical Specifications
Storage Temperature
-20 to 70°C (-4 to 158°F), 10 to 90% RH, non-condensing
Power Supply Voltage
100 to 240 VAC, 50/60 Hz
Power Consumption
15 Watts, typical
Heat Dissipation
51 BTUs per hour
Panel Connectors
Video Ports HDMI (4)
USB Keyboard/Mouse USB B (4)
Audio Input 3.5mm (4)
Serial/IR Receiver RS-232 Male (1)
Video for User Display HDMI (1)
Keyboard/Mouse
& USB 2.0 Devices USB A (4)
Audio Output 3.5mm (1)
Refer to Section 3.2 for more details on the Rear Panel
Operating Temperature and
Humidity
0 to 50 °C (32 to 122 °F); 5 to 95% RH, non-condensing
Enclosure Dimensions
Approx. 15.795 x 7.654in x 1.640in high
(40.119cm x 19.441cm x 4.166cm high)
(Tolerance: ± .039”; .100cm)
Weight
4 lbs (1.81 kg)
Shipping Weight
16 lbs (7.26 kg)
Copper Cables
(supplied with unit)
(4) 3.5mm Male to 3.5mm Male Plug, 6FT
Thinklogical Part Number: CBL000016-006FR
(4) USB Type A to USB Type B Cable, 6 Feet
Thinklogical Part Number: CBL000015-006FR
(4) HDMI Male to DVI Male Cable, 2 Meters
Thinklogical Part Number: CBL000030-002MR
Compliance
Approvals for US, Canada, and European Union
Warranty
12 months from date of shipment
Extended warranties available

Extend Distribute Innovate
REVISION C 6 MARCH 2011
2.2. Product Overview
2.2.1. Desktop Device
You may choose to place the chassis on a shelf or desktop (rubber feet included). The front panel
should be visible and front panel buttons should be accessible. All connections are made to the rear of
the chassis. The OriginKVM 41 chassis does not need to be opened or accessed. The sturdy metal
case allows units to be stacked, as required.
NOTE: Be sure to leave adequate ventilation space on both sides of the units
(2” minimum), especially if units are being stacked.
2.2.2. Convection Cooled
The OriginKVM 41 does not require special cooling or ventilation. No fans means that it will not add to
the ambient noise in your equipment room and it is less prone to equipment failure. Be sure not to block
the air vents on the sides of the unit. Leave a minimum of 2” clearance on both sides.
3. Connecting the OriginKVM 41
All physical connections to the product use industry-standard connectors. All connections are found on
the rear panel of the unit.
3.1 Front Panel View: LED Indicators
Power LED on (green) Power is connected and supplied to OriginKVM 41.
LED off Power is not connected and/or not supplied to OriginKVM 41.
Console
1 LED on (green) Port 1 of the USB hub is powered and operational.
LED off Port 1 of the USB hub is not functional.
2 LED on (green) Port 2 of the USB hub is powered and operational.
LED off Port 2 of the USB hub is not functional.
3 LED on (green) Port 3 of the USB hub is powered and operational.
LED off Port 3 of the USB hub is not functional.
4 LED on (green) Port 4 of the USB hub is powered and operational.
LED off Port 4 of the USB hub is not functional.
CPU 1-4
SEL LED on (green) Channel is selected.
USB LED on (green) USB is connected properly and power is supplied.
HDMI LED on (green) HDMI is connected properly and power is supplied.
IR
ACT LED on (green) IR Receiver is communicating/receiving data from the remote.

Extend Distribute Innovate
REVISION C 7 MARCH 2011
3.2 Rear Panel View
CPU 1
IN CPU 2 IN CPU 3 IN CPU 4 IN Console OUTPUTS Power ON/OFF
3.3 Cables
3.3.1 3.5mm to 3.5mm Cable, 6 Feet (CBL000006-006FR) –Qty 4
3.3.2 USB A-B Cable, 6 Feet (CBL000015-006FR) –Qty 4
3.3.3 HDMI to DVI, 2 Meters (CBL000030-002MR) –Qty 4
USB A
USB B
HDMI Male
DVI Male

Extend Distribute Innovate
REVISION C 8 MARCH 2011
3. 4.Installation
(Also see the Quick Start Guide in the Appendix A on page 14.)
CPU 1
HDMI, USB and
Audio IN from
CPU 1
OriginKVM 41
HDMI OUT
Keyboard Mouse Tablet
CD Drive Audio OUT
Optional: RS-232 Serial Interface for third
party controllers (AMX, Crestron, etc.)
or Remote IR Receiver.
Monitor
CPU 1 through 4 Port Connections:
1. Connect the included DVI to HDMI cable (CBL000030-002MR) from the CPU 1 DVI Video
Card to the OriginKVM 41’s HDMI IN from CPU 1 Port.
2. Connect the included USB A to USB B cable (CBL000015-006FR) from the CPU 1 USB
Keyboard/Mouse Port to the OriginKVM 41’s USB B IN from CPU 1 Port.
3. Connect the included 3.5mm to 3.5mm cable (CBL000016-006FR) from the CPU 1 Audio
Output to the OriginKVM 41’s 3.5mm Audio IN from CPU 1 Port.
4. Repeat Steps 1-3 for CPUs 2 through 4.
Console Connections:
1. Connect an AC Power Cord to the OriginKVM 41 and turn the unit ON
2. Plug the DVI Display into the HDMI port labeled HDMI OUT.
3. Connect up to (4) USB HID devices (such as keyboard and mouse, CD Drive, etc.) into the
USB A connectors labeled 1 through 4.
4. Connect your speakers or other audio output device into the 3.5mm port labeled AUDIO OUT.
5. Optional: Connect a Serial Interface for third party controllers (AMX, Crestron, etc.) or Remote
IR Receiver (up to 100’) to the RS-232 port. (See Appendix B, Pg. 15)
Ensure that all system functions are operating properly.

Extend Distribute Innovate
REVISION C 9 MARCH 2011
5.Regulatory and Safety Compliance
5.1 Safety Requirements
5.1.1 Symbols Found on Product
Markings and labels on the product follow industry-standard conventions. Regulatory markings found on
the products comply with standard requirements.
5.2 Regulatory Compliance
Thinklogical™LLC products are designed and made in the USA. Our products have been tested by a
nationally recognized testing laboratory and found to be compliant with the following standards (both
domestic USA and many international locations).
5.2.1 North America
These products comply with the following standards:
Safety
ANSI/UL60950-1: 1st Edition (2003)
CAN/CSA C22.2 No. 60950-1-03
Electromagnetic Interference
FCC CFR47, Part 15, Class A
Industry Canada ICES-003 Issue 2, Revision 1
5.2.2 Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take corrective measures.
5.2.3 European Union
5.2.3.1 Declaration of Conformity
Manufacturers name and address:
Thinklogical™, a subsidiary of Logical Solutions, LLC.
100 Washington Street
Milford, CT 06460 USA
Telephone: [phone]
Product name: OriginKVM 41
This product complies with the requirements of the Low Voltage Directive 72/23/EEC and the EMC
Directive 89/336/EEC.

Extend Distribute Innovate
REVISION C 10 MARCH 2011
5.2.3.2 Standards with Which Our Products Comply
Safety
CENELEC EN 60950-1, 1st Edition (2001)
Electromagnetic Emissions
EN55022: 1994 (IEC/CSPIR22:1993)
EN61000-3-2/A14:2000
EN61000-3-3:1994
Electromagnetic Immunity
EN55024:1998 Information Technology Equipment-Immunity Characteristics
EN61000-4-2:1995 Electro-Static Discharge Test
EN61000-4-3:1996 Radiated Immunity Field Test
EN61000-4-4:1995 Electrical Fast Transient Test
EN61000-4-5:1995 Power Supply Surge Test
EN61000-4-6:1996 Conducted Immunity Test
EN61000-4-8:1993 Magnetic Field Test
EN61000-4-11:1994 Voltage Dips & Interrupts Test
5.2.4 Supplementary Information
The following statements may be appropriate for certain geographical regions and might not apply to
your location.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user may be required to correct the interference to radio
communications.
NOTE: This Class A digital apparatus complies with Canadian ICES-003 and has been verified as
being compliant within the Class A limits of the FCC Radio Frequency Device Rules (FCC Title
47, Part 15, Subpart B Class A), measured to CISPR 22: 1993 limits and methods of
measurement of Radio Disturbance Characteristics of Information Technology Equipment.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numerique de la classe A respecte toutes les exigencies du Reglement sur le material
brouilleur du Canada.

Extend Distribute Innovate
REVISION C 11 MARCH 2011
WARNING: This is a Class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take corrective measures.
NOTE: Users may notice degraded audio performance in the presence of electromagnetic fields.
5.2.5 Product Serial Number
Thinklogical™products have a unique serial number, imprinted on a small silver label that is placed on
the bottom of the chassis. The serial number includes a date-code. The format for the date-code is two
digits for the month; two digits for the day, two digits for the year and two or three digits for a unique unit
number. This serial number is also found on the original shipping carton.
6.How to Contact Us
6.1 Customer Support
Thinklogical™is an engineering company and we believe that the first line of support is the design
engineer that developed each product. Therefore your questions will be handled promptly by our most
knowledgeable engineers.
Thank you for choosing Thinklogical™ products for your application.
We appreciate your business and are dedicated to helping you successfully use our products.
is always here to help you.
To contact us, please use the following telephone numbers and internet-based methods:
6.1.1 Website
Check out our website for current product offerings, support information and general information about
all of the products we offer.
Our internet website offers product information on all current systems, including technical specification
sheets and installation guides (for viewing online or for download), product diagrams showing physical
connections and other information you might need: www.thinklogical.com
NOTE: Most online documents are stored as Adobe Acrobat “PDF” files. If you do not have the
Adobe Acrobat reader needed to view PDF files, visit www.adobe.com for a download.

Extend Distribute Innovate
REVISION C 12 MARCH 2011
6.1.2 Email
Thinklogical™is staffed Monday through Friday from 8:30am to 5:00pm, Eastern Time Zone. We will
make every effort to respond to your email inquiries promptly. Please use one of the following email
addresses for your particular needs:
[e-mail] –Information about Thinklogical™and our products.
[e-mail] –Sales Department - orders, questions or issues.
[e-mail] –Product support, technical issues or questions, product
repairs and request for Return Authorization.
6.1.3 Telephone
Telephone Sales: Please contact our expert, technically oriented sales staff via telephone in Milford, CT
at 1-203-647-8700 or if in the continental US, you may use our toll-free number 1-800-291-3211. We
are here Monday through Friday from 8:30am to 5:00pm, Eastern Time Zone. Ask for a direct dial phone
number when you call.
Telephone Product Support: Contact Product Support via telephone in Milford, CT at 1-203-647-8700.
The support lines are manned Monday through Friday, 8:30am to 5pm, Eastern Time Zone.
International Sales: Please contact our US sales staff in Milford, CT at 1-203-647-8700. We are here
Monday through Friday, 8:30am to 5:00pm, Eastern Time Zone (same as New York City). If leaving a
voice message, please let us know the best time to call you back so we may reach you at your
convenience.
Our switchboard attendant will direct your call during regular business hours. We have an automated
attendant answering our main telephone switchboard after regular business hours and on holidays, so
you can leave a voice message at any time. Our Sales Representatives have direct numbers to better
serve you.
6.1.4 Fax
Our company facsimile number is 1-203-783-9949. Please indicate the nature of the fax on your cover
sheet and provide return contact information.
6.2 Product Support
Thinklogical’s support personnel are available Monday through Friday from 8:30am to 5:00pm, Eastern
Time Zone. If your application might require assistance at some time outside of our normal business
hours, please contact us beforehand and we will do our best to make arrangements to help you with your
Thinklogical products.
6.2.1 Warranty
Thinklogical™LLC (“Thinklogical”) warrants this product against defects in materials and workmanship
for a period of one (1) year from the date of delivery (ordinary wear and tear excluded). This limited
warranty does not cover defects resulting from (i) use of the product other than as described in the
applicable documentation for the product; (ii) modifications to or repairs of the product that are made by
any party other than Thinklogical or a party acting on Thinklogical’s behalf, or (iii) combination of the
product with third party products that is not consented to by Thinklogical. Occurrences of events

Extend Distribute Innovate
REVISION C 13 MARCH 2011
described in (i) –(iii) shall void the foregoing warranty. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.
Except for the express warranty set forth above, to the fullest extent permitted under applicable
law, Thinklogical™LLC and its suppliers disclaim any and all other warranties, express and
implied, including without limitation the implied warranties of merchantability, fitness for a
particular purpose, title and non-infringement.
If the defective product is returned to the authorized dealer within one (1) year of the delivery date, repair
or replacement of the product will be made. Repairs may be made with refurbished parts. If repair or
replacement is not possible, Thinklogical may keep the defective product and refund the amount that you
paid for the defective product. These are Thinklogical’s sole obligations, and your exclusive remedies,
for a breach of the limited warranty set forth above.
To return a defective product, contact the Thinklogical authorized dealer from whom you purchased the
product. Do not return a product directly to Thinklogical without prior authorization from your dealer.
If you have received prior authorization from your dealer and are returning a product directly to
Thinklogical:
1. Contact a sales representative or call Customer Support at 1-800-291-3211 or 1-203-647-8700.
2. Describe the defect and Customer Support will issue a Return Merchandise Authorization
Number (RMA#).
3. Pack the product in its original packing, if possible, and write the RMA number on the box.
4. Return the product to:
Thinklogical, LLC
Attn: RMA# [Insert the RMA# issued to you, by Thinklogical, here.]
100 Washington Street
Milford, CT 06460 USA
6.2.2 Our Address
If you have any issue with the product, have product questions or need technical assistance with your
Thinklogical™system, please call us at 1-800-291-3211 (USA only) or 1-203-647-8700 and let us help.
If you’d like to write us, we are located at:
Thinklogical™LLC
100 Washington Street
Milford, Connecticut, USA 06460
Thinklogical™LLC products carry a one year warranty, with longer terms available at time of purchase
on most products. Please refer to your product invoice for your products Warranty Terms & Conditions.

Extend Distribute Innovate
REVISION C 14 MARCH 2011
Appendix A: OriginKVM 41 Quick Start Guide
OriginKVM 41
CPU 1 CPU 2 CPU 3 CPU 4
HDMI, USB and Audio IN from CPUs 1-4
HDMI OUT
Keyboard Mouse Tablet
CD Drive Audio OUT
Optional: RS-232 Serial Interface
Monitor
1
2
3
45
Copyright © 2011. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
QUICK-START GUIDE
QUICK-START GUIDE OriginKVM 41
STEP 1: Ensure the
OriginKVM 41’s ON/OFF
switch is in the OFF (0)
position. Connect the AC
Power Cord and plug it
into a standard AC source.
Turn the switch ON (1).
STEP 2: Depending on your monitor type, connect a DVI to
HDMI or an HDMI to HDMI Cable between the OriginKVM 41’s
HDMI OUT port and your workstation viewing device.
STEP 3: Connect
your Audio and
USB workstation
devices to the
OriginKVM 41’s
Output Ports.
STEP 4: Connect your HDMI,
USB and Audio OUT Cables from
Source CPUs 1-4 to the
OriginKVM 41’s CPU1-CPU4
INPUT Ports. Ensure that the
CPUs are turned ON. Verify that
all system functions are operating
properly.
High Performance KVM Switch
OriginKVM_41_QSG_manual_Rev_A
The front panel’s Select Buttons, LED
Indicators and Remote IR Receiver keep you
informed and in control.
STEP 5: (Optional) Connect to the OriginKVM
41’s RS-232 Serial Port for such applications
as third party controllers (AMX, Crestron, etc.)
or Remote IR Receiver extension (up to 100').
(NOTE: There is also a local Remote IR
Receiver on the chassis’ front panel.)

Extend Distribute Innovate
REVISION C 15 MARCH 2011
Appendix B: OriginKVM 41 Serial Port Control Protocol
OriginKVM 41 Serial Port Control Protocol
The OriginKVM 41 is wired as DTE and has a DB9-M connector.
Byte seq. #0 1 2 3 4 5
ASCII string: $ 0 x N CR LF
Where x= 1 to 4, CR = 0x0d, LF = 0x0a
The baud rate is 9600, 8 data bits, 1 stop bit, no parity, no flow control.
PC OriginKVM 41
Pins: 2 3
3 2
5 5