thomann Fun Generation LED Puck ONE User manual

LED Puck ONE
LED eect
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
21.11.2019, ID: 457180, 457181, 457182, 457183, 457258, 457259, 457260, 457261

Table of contents
1 Safety instructions..................................................................................................................................... 4
2 Features....................................................................................................................................................... 10
3 Installation and starting up................................................................................................................ 12
3.1 Connecting the device................................................................................................................... 12
3.2 Operating the device - remote control.................................................................................... 14
3.3 Changing the lens............................................................................................................................ 17
3.4 Colours and programmes............................................................................................................. 18
4 Technical specications....................................................................................................................... 20
5 Troubleshooting...................................................................................................................................... 22
6 Protecting the environment.............................................................................................................. 25
Table of contents
LED Puck ONE
3

1 Safety instructions
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
This device is intended for use as an electronic lighting eect by means of LED technology. The
device is designed for professional use only and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the operating life of the device by regular breaks and by avoiding frequent switching
on and o. The device is not suitable for continuous operation.
Intended use
Safety instructions
LED eect
4

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
LED Puck ONE
5

WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
LED eect
6

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐
tions and do not switch the device on immediately after it was exposed to tem‐
perature uctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
Safety instructions
LED Puck ONE
7

NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual cur‐
rent circuit breaker. Failure to do so could result in damage to the device and pos‐
sibly the user.
Unplug the external power supply before electrical storms occur and when the
device is unused for long periods of time to reduce the risk of electric shock or
re.
NOTICE!
Magnetic elds
In the bottom of the device, a strong magnet is installed, which can aect the
operation of electromagnetically inuenceable objects or devices. Do not use the
LED light in electromagnetic sensitive environments (pacemakers, credit cards,
etc.).
Safety instructions
LED eect
8

NOTICE!
Risk of re
The optical lenses of the device focus the light and can cause a burning glass
eect when exposed to sunlight. Never expose unassembled lenses to direct sun‐
light.
Use the device only in areas where 2.4 GHz radio transmission is permitted.
Safety instructions
LED Puck ONE
9

2 Features
The LED Puck ONE lighting system produces impressive lighting eects and is ideal for mobile
use.
n2 interchangeable eect lenses
n20 internal programs with xed or changing colours
nSound control
nControl via remote control (not included in all sets)
nMounting upright, by magnet or with M6 thread
nPower supply via USB mains adapter or power bank (not included in all sets)
The product series LED Puck ONE comprises the following components and sets with dierent
delivery sizes:
Item no. Name
457260 Fun Generation LED Puck ONE 2 Way Split
457261 Fun Generation LED Puck ONE Lens Kit
Features
LED eect
10

Item no. Name
457259 Fun Generation LED Puck ONE Power Supply
457258 Fun Generation LED Puck ONE Remote 2,4 GHz
457180 Fun Generation LED Puck ONE Set of 1
457181 Fun Generation LED Puck ONE Set of 2
457182 Fun Generation LED Puck ONE Set of 4
457183 Fun Generation LED Puck ONE Single Unit
460372 Fun Generation LED Puck ONE USB Cable 2.0
Features
LED Puck ONE
11

3 Installation and starting up
3.1 Connecting the device
You can mount the device in three dierent ways:
nStanding on a smooth surface
nFixing by magnet
nM6 inner screw thread (thread depth 6 mm)
The device is powered by the USB power adapter or a power bank. Connect a maximum of 2
devices per USB port (max 4 devices per splitter).
You can remotely control one or more LED lights. First assign the device to the remote control
(pairing).
Mounting options
Connecting the LED light
Establishing radio connection
between LED light and remote
control
Installation and starting up
LED eect
12

1. The remote control is in sleep mode by default. Press any button on the remote control
to activate it.
ðThe remote control is activated for 5 minutes. It can now receive and transmit radio
signals.
2. Connect the LED light to a USB power source.
ðThe group set on the remote control ashes.
3. To change the assignment of the group, press [GROUP] on the remote control.
After 5 seconds, the group assignment mode will automatically turn o. The device is
ready for operation in the selected group.
When delivered, the device is already paired with the remote control.
Installation and starting up
LED Puck ONE
13

3.2 Operating the device - remote control
Installation and starting up
LED eect
14

Button Function
1 1, 2, 3, 4 Display for groups 1…4. The button of the selected group
lights up red.
2[GROUP] You can control up to four groups of devices separately. Press
[GROUP] to select the group to control. The button of the
selected group lights up red.
Hold down [GROUP] to control all groups simultaneously.
3Press to enable the sound control.
Press again to disable the sound control.
4Press to select a preprogrammed static colour or eect.
Hold down to access preset 1.
Preset 1…14: static colours
Preset 15…20: preprogrammed colour changes or sequences
Installation and starting up
LED Puck ONE
15

Button Function
5Press to select a preprogrammed static colour or eect.
Hold down to access preset 20.
Preset 1…14: static colours
Preset 15…20: preprogrammed colour changes or sequences
6[SLOW] Press [SLOW] to decrease the ash frequency of the respective
static colour (preset 1…14) or the speed of the respective pro‐
gramme (Preset 15…20).
Hold down [SLOW] to pause the ash eect of a static colour or
of a programme sequence.
7[FAST] Press [FAST] to increase the ash frequency of the respective
static colour (preset 1…14) or the speed of the respective pro‐
gramme (Preset 15…20).
Hold down [FAST] to trigger the maximum ash eect fre‐
quency of a static colour or programme sequence.
8Press to decrease the brightness in increments of 20 %.
Installation and starting up
LED eect
16

Button Function
9Press to increase the brightness in increments of 20 %.
10 [BLACKOUT] Press [BLACKOUT] to blackout the light. The lights are still in ON
state during the blackout.
3.3 Changing the lens
The device is delivered with two optical lenses (Eect Lens, 50° beam angle, and Frost Filter,
160° beam angle). You can change the lens of the device for a dierent eect. This is how to
change the lens:
Installation and starting up
LED Puck ONE
17

1. Turn the aluminium ring on the top of the device counterclockwise.
2. Remove the existing lens and insert another lens.
When using the Eect Lens, make sure that the smooth side of the lens faces the
device and that the rippled side is on the outside.
3. Turn the aluminium ring on the top of the device clockwise to close the device again.
3.4 Colours and programmes
Number Programme Number Programme
1 White 11 Magenta
2 Red 12 Pastel red
3 Orange 13 Pastel green
Installation and starting up
LED eect
18

Number Programme Number Programme
4 Yellow 14 Pastel blue
5 Light green 15 Blue, red
6 Cyan 16 Magenta, white
7 Cyan blue 17 White, blue
8 Blue 18 Pastel red, pastel green, pastel blue
9 Blue-magenta 19 Yellow, magenta, blue
10 Magenta 20 Rainbow colours
Installation and starting up
LED Puck ONE
19

4 Technical specications
Light source 1 × RGBW LED, 12 W
Light source properties Colour temperature White: 8000 K
Optical properties Beam angle Eect Lens: 50°
Frost Filter: 160°
Control Remote control
Input connections Voltage supply USB port for connecting a mains adapter or power bank
Voltage supply Plug-in power supply (5 V / 400 mA , centre positive)
Protection class IP60
Mounting options Upright
Magnet
M6 inner screw thread (thread depth 6 mm)
Dimensions (W × H × D) 55 mm × 26 mm × 55 mm
Technical specications
LED eect
20