thomann ROADWORX BS-2400 User manual

BS-2400
Stand
User Manual

Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
Internet: www.thomann.de
15.09.2023, ID: 568328 (V4)

Table of contents
1 General information................................................................................................................................. 5
1.1 Symbols and signal words............................................................................................................... 5
2 Safety instructions..................................................................................................................................... 7
3 Features.......................................................................................................................................................... 9
4 Operating.................................................................................................................................................... 10
5 Technical specications....................................................................................................................... 14
6 EU Declaration of Conformity........................................................................................................... 16
7 Protecting the environment.............................................................................................................. 18
Table of contents
BS-2400 3
Stand

4BS-2400
Stand

1 General information
This document contains important instructions for the safe operation of the product. Read and
follow the safety instructions and all other instructions. Keep the document for future refer‐
ence. Make sure that it is available to all those using the product. If you sell the product to
another user, be sure that they also receive this document.
Our products and documentation are subject to a process of continuous development. They
are therefore subject to change. Please refer to the latest version of the documentation, which
is ready for download under www.thomann.de.
1.1 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this document.
General information
BS-2400 5
Stand

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
6BS-2400
Stand

2 Safety instructions
This speaker stand is used for stable xing and height-adjustable installation of loudspeaker
cabinets. Use the product only as described in this user manual. Any other use or use under
other operating conditions is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from improper use.
This product may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
product only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
BS-2400 7
Stand

Safety
DANGER!
Risk of injury and choking hazard for children!
Children can suocate on packaging material and small parts. Children can injure themselves when handling the product. Never
allow children to play with the packaging material and the product. Always store packaging material out of the reach of babies and
small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the product without
supervision. Keep small parts away from children and make sure that the product does not shed any small parts that children could
play with.
CAUTION!
Risk of injury due to tipping of the stand during loaded transport!
If the stand is moved without having removed the installed devices, the stand may tip over and cause injuries and property damage.
Remove the installed devices before transporting the stand.
CAUTION!
Risk of injury due to tipping of stand on an unsuitable ground!
When the stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the
stand only on even and solid ground.
CAUTION!
Risk of injury due to tipping of the stand from excessive loading!
In case of excessive loading, the stand might tip over, causing injury and property damage. Never exceed the specied maximum
load for the stand.
Safety instructions
8BS-2400
Stand

3 Features
Special features of the speaker stand:
nExtendible up to a height of 2.15 m
nCentric load capacity up to 50 kg
nExtension tube made of hardened steel
nLegs and cross braces made of aluminium
nM10 female thread at the 35 mm ange
nTransport length when folded: 1.18 m
Features
BS-2400 9
Stand

4 Operating
Unpack and check carefully there is no transportation damage before using the product. Keep
the equipment packaging. To fully protect the product against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
CAUTION!
Risk of injury due to tipping of the stand during loaded transport!
If the stand is moved without having removed the installed devices, the stand
may tip over and cause injuries and property damage.
Remove the installed devices before transporting the stand.
CAUTION!
Risk of injury due to tipping of stand on an unsuitable ground!
When the stand is installed on soft or uneven ground, the stand may tip over and
cause injuries and property damage.
Install the stand only on even and solid ground.
Operating
10 BS-2400
Stand

CAUTION!
Risk of injury due to tipping of the stand from excessive loading!
In case of excessive loading, the stand might tip over, causing injury and property
damage.
Never exceed the specied maximum load for the stand.
NOTICE!
Possible staining due to plasticiser in rubber feet!
The plasticiser contained in the rubber feet of this product may react with the
coating of the oor and cause permanent dark stains after some time.
If necessary, use a suitable mat or felt slide to prevent direct contact between the
device’s rubber feet and the oor.
Comply with regulations
When installing and operating, make sure to follow the standards and regulations
that apply in your country.
Operating
BS-2400 11
Stand

1. Unfold the feet of the stand until the cross-braces are in a horizontal position.
2. Fix this position with the safety screw on the slider to which the three feet are attached.
3. Lift the speaker box onto the extension tube. The weight of the speaker box to be
installed must not exceed the maximum centric load of 50 kg.
4. Fold out the hand crank.
5. To adjust the height, untighten the locking screw at the crank case.
6. Press and hold the yellow security button at the crank case while adjusting the desired
height with the hand crank.
7. Release the yellow security button at the crank case, x the position of the extension
tube with the locking screw at the crank case and fold the hand crank back in.
Setting up
Operating
12 BS-2400
Stand

1. Fold out the hand crank.
2. Untighten the locking screw at the crank case.
3. Press and hold the yellow security button at the crank case while fully lowering the
extension tube.
4. Release the yellow security button at the crank case, x the position of the extension
tube with the locking screw at the crank case and fold the hand crank back in.
5. Lift o the speaker box from the extension tube.
6. Loosen the safety screw on the slider to which the three feet are attached.
7. Fold up the feet of the stand.
Dismounting
Operating
BS-2400 13
Stand

5 Technical specications
Height, max. 2.15 m
Total width 1.10 m
Adjustable stand height 1.44 m … 2.15 m
Stand footprint 0.62 m2
Length cross-braces 370 mm
Tube diameter Main tube Æ41 mm
Extension tube Æ35 mm
Feet Æ35 mm
Holder type M10 female thread at the ange / 35 mm ange
Load capacity, max. (not extended, with centric load) 50 kg
Transport dimensions (W × H × D) 170 mm × 1180 mm × 130 mm
Weight 7.5 kg
Colour Black
Technical specications
14 BS-2400
Stand

Speaker ange 35 mm / M10 female thread
Set of 2 stands no
Material steel
Crank stand yes
Ringlock no
Pneumatics no
Foot type tripod
Further information
Technical specications
BS-2400 15
Stand

6 EU Declaration of Conformity
Name and address of
manufacturer / EU-AR
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
THIS DECLARATION OF CONFORMITY IS ISSUED UNDER THE SOLE RESPONSIBILITY OF:
Name and address of
manufacturer
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Product identication 568328 Roadworx BS-2400 Speaker Stand
THE PRODUCTS MENTIONED IN THIS DECLARATION ARE IN CONFORMITY WITH:
EU Community Legislation Machinery Directive 2006/42/EC
Harmonised standards Safety of machinery
ANNEX I OF 2006/42/EC
EU Declaration of Conformity
16 BS-2400
Stand

SIGNED FOR AND ON BEHALF OF:
Place and date of issue Burgebrach, 26 May 2023
EU Declaration of Conformity
BS-2400 17
Stand

7 Protecting the environment
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that
they are collected for recycling. Please follow the notes and markings on the packaging.
Disposal of the packaging mate‐
rial
Protecting the environment
18 BS-2400
Stand

Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de