thomann Millenium SR-2012 Quick start guide

SR-2012, SR-2018, SR-2024
studio rack
assembly instructions

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
16.12.2020, ID: 129416, 129418, 129419

Table of contents
1 Safety instructions.......................................................................................................................................................................................................... 4
2 Scope of delivery.............................................................................................................................................................................................................. 5
3 Installation.......................................................................................................................................................................................................................... 7
4 Technical specications............................................................................................................................................................................................. 11
5 Protecting the environment.................................................................................................................................................................................... 13
Table of contents
SR-2012, SR-2018, SR-2024
3

1 Safety instructions
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children.
Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces
and choke!
Never let children play unattended with the product.
CAUTION!
Risk of injury to the hands
When assembling and screwing the individual parts, pay attention to sharp edges on tools, screws and components. Use only
suitable tools.
CAUTION!
Risk of injury due to heavy weight
Due to the heavy weight of the product, at least two persons are required for transport and assembly.
Safety instructions
studio rack
4

2 Scope of delivery
Before you assemble your rack, make sure the contents of package is complete according to the following list.
19-inch studio sack Millenium SR-2012
n1 × baseplate, steel sheet
n1 × cover plate, steel sheet
n2 × side panel, sheet steel with rack rails, guide rail for heavy load brackets and fan grid
n2 × furniture wheel
n2 × furniture wheel with locking mechanism
n4 × height-adjustable stand feet
n8 × Allen screw M6 × 16
n4 × plastic cap
n12 × heavy load bracket
n12 × Allen screw M6 × 15
n12 × nut for heavy load bracket
n24 × cage nut M6
n24 × Phillips screw M6 × 20
n24 × plastic washer
n1 × Allen wrench
n1 × assembly instruction
19-inch studio rack Millenium SR-2018
n1 × baseplate, steel sheet
n1 × cover plate, steel sheet
n2 × side panel, sheet steel with rack rails, guide rail for heavy load brackets and fan grid
n2 × furniture wheel
n2 × furniture wheel with locking mechanism
n4 × height-adjustable stand feet
n8 × Allen screw M6 × 16
n4 × plastic cap
n18 × heavy load bracket
n18 × Allen screw M6 × 15
n18 × nut for heavy load bracket
n36 × cage nut M6
n36 × Phillips screw M6 × 20
n36 × plastic washer
n1 × Allen wrench
n1 × assembly instruction
Scope of delivery
SR-2012, SR-2018, SR-2024
5

19-inch studio rack Millenium SR-2024
n1 × baseplate, steel sheet
n1 × cover plate, steel sheet
n2 × side panel, sheet steel with rack rails, guide rail for heavy load brackets and fan grid
n2 × furniture wheel
n2 × furniture wheel with locking mechanism
n4 × height-adjustable stand feet
n8 × Allen screw M6 × 16
n4 × plastic cap
n24 × heavy load bracket
n24 × Allen screw M6 × 15
n24 × nut for heavy load bracket
n48 × cage nut M6
n48 × Phillips screw M6 × 20
n48 × plastic washer
n1 × Allen wrench
n1 × assembly instruction
Scope of delivery
studio rack
6

3 Installation
Overview
The following gure provides an overview of the positioning of the individual components. In addition to the Allen key supplied,
you will need a suitable Phillips screwdriver and a soft pad for the assembly.
Installation
SR-2012, SR-2018, SR-2024
7

Assembly steps
1. Turn the baseplate (1) so that you can screw the two side panels (2) in the baseplate (1) with each two Allen screws
M6 × 16 (3) using the Allen key supplied.
Use a soft padding to prevent damage to the mounting or housing surface.
2. Place the assembled unit with the baseplate facing down on a suitable mounting surface. Use a soft padding to prevent
damage to the mounting or housing surface.
Screw the heavy load brackets (4), the M6 × 15 Allen screws (5) and the heavy load bracket nuts (6) in the guide rails of the
side panels using the Allen wrench as shown. Make sure that the heavy load bracket nut (6) is inside the guide rail.
Installation
studio rack
8

3. Place the cover plate (7) of the housing on the mounted unit and screw the cover plate in place with four Allen screws
M6 × 16 (3) in the two side panels using the provided Allen wrench.
4. Insert the four plastic caps (8) into the recesses on the cover plate.
Installation
SR-2012, SR-2018, SR-2024
9

5. Place the assembled unit with the cover plate facing down on a suitable mounting surface. Use a soft padding to prevent
damage to the mounting or housing surface.
Mount the two wheels (10) and the two locking wheels (9) or alternatively the four height-adjustable stand feet (11) to the
base plate.
6. To install the equipment into the studio rack, screw it in the rack rails with a Phillips screwdriver using the Phillips screws
M6 × 20 (12), M6 cage nuts (13), and plastic washers (14) as illustrated.
Installation
studio rack
10

4 Technical specications
19-inch studio rack SR-2012
Construction type Solid sheet steel construction with rack rails, guide rail for heavy load
brackets and fan grid
Item no. 129416
Installation width 19 inch
Rack units (RU) 12
Installation depth max. 400 mm
Power handling max. 50 kg
Dimensions (W × H × D) 560 mm × 640 mm × 460 mm
Weight 16.8 kg
19-inch studio rack SR-2018
Construction type Solid sheet steel construction with rack rails, guide rail for heavy load
brackets and fan grid
Item no. 129418
Installation width 19 inch
Rack units (RU) 18
Installation depth max. 400 mm
Power handling max. 60 kg
Dimensions (W × H × D) 560 mm × 910 mm × 460 mm
Weight 20.5 kg
Technical specications
SR-2012, SR-2018, SR-2024
11

19-inch studio rack SR-2024
Construction type Solid sheet steel construction with rack rails, guide rail for heavy load
brackets and fan grid
Item no. 129419
Installation width 19 inch
Rack units (RU) 24
Installation depth max. 400 mm
Power handling max. 80 kg
Dimensions (W × H × D) 560 mm × 1200 mm × 460 mm
Weight 31 kg
Technical specications
studio rack
12

5 Protecting the environment
Disposal of the packaging material
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal
recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
Protecting the environment
SR-2012, SR-2018, SR-2024
13

Notes
studio rack
14

Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de