thomann Achat 110 MA User manual

Achat 110 MA
active full-range
speaker
user manual

Musikhaus Thomann e.K.
Treppendorf 30
96138 Burgebrach
Germany
Telephone: [phone]
email: [email protected]
Internet: www.thomann.de
14.02.2012

Table of contents
1 General notes............................................................................................................................................... 4
2 Safety instructions..................................................................................................................................... 7
3 Features....................................................................................................................................................... 11
4 Installation.................................................................................................................................................. 12
4.1 Pin assignment.................................................................................................................................. 14
4.2 Tips on handling speakers............................................................................................................ 17
5 Connections and operating elements .......................................................................................... 18
6 Technical specifications....................................................................................................................... 20
7 Protecting the environment.............................................................................................................. 22
Table of contents
Achat 110 MA
3

1 General notes
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products are subject to a process of continuous development. We therefore reserve the
right to make changes without notice.
This section gives an overview of the symbols and signal words used in this user manual.Symbols and signal words
General notes
active full-range speaker
4

Signal word Meaning
DANGER! This combination of symbol and signal word
indicates an immediate dangerous situation
that will result in death or serious injury if it is
not avoided.
WARNING! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in death or serious injury if it is not
avoided.
CAUTION! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in minor injury if it is not avoided.
NOTICE! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in material and environmental
damage if it is not avoided.
General notes
Achat 110 MA
5

Warning signs Type of danger
Warning – high-voltage.
Warning – suspended load.
Warning – danger zone.
General notes
active full-range speaker
6

2 Safety instructions
This device is intended to be used in a sound reinforcement system. Use the device only as
described in this user manual. Any other use or use under other operating conditions is consid‐
ered to be improper and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety instructions
Achat 110 MA
7

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
active full-range speaker
8

CAUTION!
Possible hearing damage
The device can produce volume levels that may cause temporary or permanent
hearing impairment. Over an extended period of time, even levels that seem to
be uncritical can cause hearing damage.
Decrease the volume level immediately if you experience ringing in your ears or
hearing impairment. If this is not possible, keep a greater distance or use suffi‐
cient ear protectors.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.
Safety instructions
Achat 110 MA
9

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
active full-range speaker
10

3 Features
Special features of the device:
nConnections: XLR/1/4" combo socket for signal input, XLR mounting plug for signal output
nVolume control
nSwitchable low-cut filter to eliminate low frequencies
nSelectable operating voltage
nPole mount flange, 36 mm, on bottom side
nRigging points M10
nBlack textured coating
Features
Achat 110 MA
11

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the device against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation
active full-range speaker
12

NOTICE!
Possible property damage by magnetic fields
Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate
distance to devices that can be adversely affected or damaged by an external
magnetic field.
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Installation
Achat 110 MA
13

4.1 Pin assignment
You can use XLR and 1/4" plugs with balanced or unbalanced wiring. In the following we will
give you an overview of the various possibilities.
XLR mounting sockets are used for signal inputs. XLR mounting plugs provide the output sig‐
nals. Drawing and table indicate the XLR pin assignment.
Balanced wiring:
1 Ground, shielding
2 Positive signal (+)
3 Negative signal (–)
XLR connections for signal
inputs and outputs
Installation
active full-range speaker
14

Unbalanced wiring:
1 Ground, shielding
2 Signal
3 Bridged to pin 1
Drawing and table indicate the pin assignment for a 1/4" TS phone jack to be used.
Unbalanced wiring (1/4" TS plug):
1 Signal
2 Ground, shielding
1/4" socket for signal inputs and
outputs
Installation
Achat 110 MA
15

Unbalanced wiring (1/4" TRS plug):
1 Signal
2, 3 Ground, shielding
Balanced wiring (1/4" TRS plug):
1 (Tip) Positive signal (+)
2 (Ring) Negative signal (–)
3 (Sleeve) Ground, shielding
Installation
active full-range speaker
16

4.2 Tips on handling speakers
We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐
ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound
will be evenly spread with maximum range throughout the audience area.
Always use high grade cable to connect your equipment. Otherwise you won't reach max‐
imum sound quality.
If you notice distortion during operation, the active speaker is overloaded. This may perma‐
nently damage the device. Always reduce the volume as soon as you hear distortion.
Installation
Achat 110 MA
17

5 Connections and operating elements
1115V / 60Hz ~ 230V / 50Hz
Mains voltage selector. Make sure this selector is set correctly for the actual supply
voltage at the operating location. Use this switch only when the device is switched
off! Use a suitable screwdriver.
2OUTPUT
XLR mounting plug for line signal output.
3INPUT
XLR/1/4" combo socket for line signal input.
4CLIP
Indicates overloading (Clipping). In this case the level of the input signal is too high.
5120Hz LOW CUT
Use this switch to attenuate the low frequencies below 120 Hz.
Connections and operating elements
active full-range speaker
18

6VOLUME
Volume control.
7Connection for mains supply voltage
IEC chassis connector with fuse holder for operating voltage supply.
If this fuse blows, you have to replace it by a new one with same specifications.
Before you must disconnect the unit from the mains power.
8I / O (ON/OFF)
Use the mains switch to power the unit on or off.
Connections and operating elements
Achat 110 MA
19

6 Technical specifications
Input XLR/1/4" combo socket
Input impedance 20 kΩ (balanced), 10 kΩ (unbalanced)
Input sensitivity Line: 775 mV
Mic: 20 mV
Output XLR mounting plug
Frequency response 70 Hz…20 kHz
System 2-way full-range active speaker box with built-in crossover
Speakers 1 × 10" woofer, 1 × 1" mid-high driver with 3" voice coil
Dispersion (H × V) 90° × 60°
THD Line: < 3%
Output power 140 W (RMS)
Maximum SPL 119 dB
Technical specifications
active full-range speaker
20