thomann the box PA202A User manual

PA202A
full-range speaker
user manual

Musikhaus Thomann e.K.
Treppendorf 30
96138 Burgebrach
Germany
Telephone: [phone]
email: [email protected]
Internet: www.thomann.de
30.11.2011

Table of contents
1 General notes............................................................................................................................................... 4
2 Safety instructions..................................................................................................................................... 7
3 Operating elements............................................................................................................................... 12
4 Installation.................................................................................................................................................. 16
4.1 Pin assignment.................................................................................................................................. 18
4.2 Tips on speaker positioning......................................................................................................... 19
5 Technical specifications....................................................................................................................... 20
6 Cleaning and care.................................................................................................................................... 22
7 Protecting the environment.............................................................................................................. 23
Table of contents
PA202A
3

1 General notes
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products are subject to a process of continuous development. We therefore reserve the
right to make changes without notice.
This section gives an overview of the symbols and signal words used in this user manual.Symbols and signal words
General notes
full-range speaker
4

Signal word Meaning
DANGER! This combination of symbol and signal word
indicates an immediate dangerous situation
that will result in death or serious injury if it is
not avoided.
WARNING! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in death or serious injury if it is not
avoided.
CAUTION! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in minor injury if it is not avoided.
NOTICE! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in material and environmental
damage if it is not avoided.
General notes
PA202A
5

Warning signs Type of danger
Warning – high-voltage.
Warning – suspended load.
Warning – danger zone.
General notes
full-range speaker
6

2 Safety instructions
This device is intended to be used in a sound reinforcement system. Use the device only as
described in this user manual. Any other use or use under other operating conditions is consid‐
ered to be improper and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety instructions
PA202A
7

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
full-range speaker
8

CAUTION!
Possible hearing damage
The device can produce volume levels that may cause temporary or permanent
hearing impairment. Over an extended period of time, even levels that seem to
be uncritical can cause hearing damage.
Decrease the volume level immediately if you experience ringing in your ears or
hearing impairment. If this is not possible, keep a greater distance or use suffi‐
cient ear protectors.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.
Safety instructions
PA202A
9

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
full-range speaker
10

NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Safety instructions
PA202A
11

3 Operating elements
1CLIP
This LED lights up if distortion occurs due to excessive input level.
2LOW CUT @ 120 Hz
Press this button to attenuate the frequencies below 120 Hz. This will reduce the
transmission of impact noise and increase the lifetime of the woofer.
3MIC
Indicator for an incoming microphone signal.
4LINE
Indicator for an incoming line signal.
Operating elements
full-range speaker
12

5LINE/MIC
This switch lets you toggle the input sensitivity for microphone or line level signals.
For safety reasons this switch needs to be pressed deeply with a pen-like object,
until it clicks into position. Press this switch down when connecting audio signals
with microphone level to the INPUT socket. Release the switch when connecting
line level signals.
6115 V / 230 V
Mains voltage selector. Make sure this selector is set correctly for the actual supply
voltage at the operating location. Use this switch only when the device is switched
off!
7BASS control
Bass tone control. Increase the low frequencies by rotating this knob clockwise and
decrease them by rotating counter-clockwise.
8TREBLE control
Treble tone control. Increase the high frequencies by rotating this knob clockwise
and decrease them by rotating counter-clockwise.
Operating elements
PA202A
13

9VOLUME control
Increase the volume by rotating this knob clockwise and decrease the volume by
rotating it counter-clockwise. Attention: first please adjust the volume to minimum
before switching the unit on or making connections. Then adjust the appropriate
volume.
10 OUTPUT socket
If required, you can connect the line input of further active monitors to this line
output.
11 INPUT socket
Connect the input signal here.
12 Mains fuse
If this fuse blows, you first have to disconnect the device from the mains. Then
replace the broken fuse by a new one with same specifications.
Operating elements
full-range speaker
14

13 Mains power supply connector
Make sure that the voltage selector (6) is in the position that matches with the
actual supply voltage available for operation, BEFORE you connect the mains
power here.
14 ON/OFF
Power ON/OFF switch.
Operating elements
PA202A
15

4 Installation
Unpack and check carefully there is no transportation damage before using the unit.
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation
full-range speaker
16

CAUTION!
Risk of injury due to heavy weight
Due to the heavy weight of the device, at least two persons are required for trans‐
port and installation.
NOTICE!
Possible property damage by magnetic fields
Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate
distance to devices that can be adversely affected or damaged by an external
magnetic field.
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Installation
PA202A
17

4.1 Pin assignment
You can use XLR connectors with either balanced or unbalanced wiring.
XLR mounting sockets are provided for signal inputs. XLR mounting plugs are provided for
signal outputs. Drawings and descriptions explain the pin assignment.
Balanced wiring:
1 Ground, shielding
2 Positive signal (+)
3 Negative signal (–)
XLR connection for signal in and
outputs
Installation
full-range speaker
18

Unbalanced wiring:
1 Ground, shielding
2 Signal
3 Bridged with Pin 1
4.2 Tips on speaker positioning
We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐
ence unobstructedly. Often tripod mounting is a good way to maximise dispersion and range.
Always use high grade cable to connect your equipment. Otherwise you won't reach max‐
imum sound quality.
For optimum results both impedance and power handling of the speakers must match the
requirements of the amplifier. Always follow the technical specifications of the speakers! The
overall impedance of the connected loudspeakers must not deceed the minimum output
impedance of the amp. The power handling of the speakers should be above the amp's output
power.
Installation
PA202A
19

5 Technical specifications
Mains voltage AC 115 V~, 50/60 Hz, AC 230 V~ 50/60 Hz
System 2-way full range active speaker with built-in crossover
Cabinet material Polypropylene, trapezoid
Cabinet colour Black
Driver quantity 1 × 12" (woofer), 1 × 1,4" tweeter
Tweeter dispersion (H x V) 55° × 55°
Frequency response 50 Hz - 18 kHz (-3 dB)
Max SPL (1 m)) 120 dB (free field)
Level adjustment ±12 dB (10 kHz) - treble
±12 dB (100 Hz) - bass
Output power 200 W (woofer) + 50 W (tweeter)
Distortion Line - 0.02 %, mic - 0.04 %
Technical specifications
full-range speaker
20