TiCad STAR User manual

READ ME FIRST
TiCad® STAR
Read me first 1-1

2
READ ME FIRST
TiCad®STAR
YOUR TICAD® STAR IN DETAIL
1 Drawbar handle
2 Umbrella adapter
3 Drawbar
4 Drawbar adjuster
5 Fastening straps
6 Centre bar
7 Shaft
8 Locking pin
9 Sliding sleeve
10 Titanium wheel
11 Bottom bar
Congratulations!
You have chosen an excellent product manufactured by TiCad®!
All of our high-quality products are carefully handmade at our
production facility in Altenstadt (Hessen, Germany).
To ensure that you will be able to enjoy your trolley for a very
long time, please take some time to carefully read through these
operating instructions, which contain important information that
will make using your trolley a lot easier.
If you have any further questions regarding the use or care of your
trolley, please contact your TiCad®dealer.
We would like to wish you many an enjoyable game
of golf and a lot of success! Your TiCad®team
1
2
3
45
5
6
7
9
9
10
11
10
8
SETTING UP YOUR TROLLEY
Fitting the shaft:
Before fitting the shaft, pull back the locking pin (black round
handle) and turn it slightly to the right (about 45°). You can now
insert the shaft halfway into the frame and release the locking pin
by turning the black handle back again and allowing the locking
pin to engage. You can now insert the shaft fully into the frame
until it engages. Shaft with locking pin groove Locking pin
Setting up your trolley:
The frame of your TiCad®trolley is easy to set up and fold together.
To unfold your trolley, push the lower bar right down until it
reaches the bottom limit stop and the centre bar right up until it
reaches the top limit stop.
Unfolding your TiCad®Star
Removing and attaching the wheels

3
Adjusting the drawbar
Adjusting the drawbar:
As soon as the golf bag has been attached to the TiCad®trol-
ley, you can adjust the drawbar to a comfortable height for you.
You can loosen the drawbar by turning the black handle coun-
ter-clockwise 3 to 4 times. Only start moving the drawbar into
the right position once it has been completely freed and moves
without resistance. To fasten the drawbar, turn the black handle in
the opposite direction. When doing so, move the drawbar slight-
ly up and down to allow the fastening mechanism‘s teeth to fully
engage with one another and to prevent them from becoming
damaged.
Adjust the drawbar in such a way that the trolley is well-
balanced when pulled with the golf bag fitted in place.
Attaching the golf bag
Attaching the golf bag:
Put your golf bag onto the trolley before fitting the drawbar, i.e.
while it is hanging loose. To fasten the golf bag, insert one of the
round fasteners into the strap of the opposite fastening strap.
When doing so, make sure not to flick the fasteners, as this may
cause injury. To undo the fastening straps, hold on to the bottom
strap and then pull out the top fastening strap with your other
hand.
We recommend adjusting the drawbar only once the golf
bag has been attached to prevent the trolley from tipping
over.
USING YOUR TROLLEY
Always move your TiCad®trolley slowly and carefully when
moving over rough ground that contains stones or pot-
holes. Avoid kerb edges.
Allen key in the umbrella adapter Umbrella adapter with umbrella
Umbrella adapter:
The umbrella adapter is supplied ready-fitted at the end of the
drawbar‘s handle. To adjust the adapter to the drawbar‘s posi-
tion and to your body height, loosen the screw in the centre of the
adapter with the supplied Allen key and turn it into the required
position.
When doing so, the larger hole on the adapter always has to
point towards the top and the middle hole with the thread
to the bottom. Once you have adjusted the adapter, tighten
the screw again.

4
WARRANTY
Your TiCad®trolley has been designed and built with great care.
Please get in touch with your TiCad®dealer if you notice anything
unusual. The provision of spare parts or repairs performed under
warranty do not extend the warranty period. The warranty does
not apply to damage caused by carelessness or rough handling,
overloading the trolley, inappropriate operation, external force,
submersion in water and unauthorised persons‘ actions. The
warranty only applies if the enclosed operating instructions have
been observed and the trolley is being appropriately used and
cared for. Technical changes and new developments do not enti-
tle warranty holders to upgrades.
The warranty period for the titanium frame and the wheels is 5
years from the date of purchase. The warranty does not apply to
wear parts such as e.g. tyres, leather handle.
SERVICE
If you experience any problems with your TiCad®trolley, please
first contact your TiCad®dealer, one of our service centres or get
in touch with us at our office in Altenstadt, Germany.
We will then arrange for your TiCad®trolley to be collected and
returned to us and help you with the packaging material. If you
want us to perform an inspection or repair, there is no need to
contact your TiCad®dealer.
For trolleys located outside Germany, please always first contact
your local service staff.
Postal address: TiCad®GmbH & Co. KG
Heegwaldstr. 5
D-63674 Altenstadt -Waldsiedlung
Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]
PUBLISHER
TiCad®GmbH & Co. KG, Heegwaldstr. 5, D-63674 Altenstadt
www.ticad.de
The above information, wording and images have been largely
standardised and are primarily intended to describe the trolley‘s
basic functions. For this reason, the product supplied to you may
slightly differ from the above descriptions, in particular if your
trolley is a new version. This „Read Me First“ manual must not be
copied or used otherwise in whole or part without TiCad®GmbH
& Co. KG‘s consent.
Please carefully retain your Read Me First manual and the origi-
nal packaging.
Please read our General Terms and Conditions of Business www.
ticad.de.
Graphic design and layout: www.bild-satz-und-sieg.de
Care:
The frame of your TiCad®trolley is made of a high-quality,
rust-proof material and has been sealed to keep out rain. The
frame can be cleaned with a conventional household cleaning
product – but not with abrasive cleaners. The titanium‘s shine
can be restored with a special cleaning oil available from TiCad®.
The hubs of the wheels and the couplings must not be oiled or
greased.
Technical data and dimensions
Model TiCad® Star
Weight of frame + wheels 3.6 kg
Dimensions when folded cm 66x35x10
READ ME FIRST
TiCad® STAR
©2014 TiCad®GmbH & Co. KG - All rights reserved.
YOUR NOTES