Tiger TIGERFLEX APEX BIKE SHED User manual

TIGERFLEX APEX BIKE SHED -
ASSEMBLY GUIDE
BEFORE YOU START :
MAKE SURE ALL PARTS ARE SUPPLIED.
CHECK BASE YOU ARE BUILDING ON IS FLAT & LEVEL.
WEATHER CONDITIONS ARE FAVOURABLE FOR ASSEMBLING A SHED.
WE WOULD RECOMMEND ASSEMBLY AS A 2 PERSON JOB.

4ft HEAVY DUTY TIMBER
FLOOR
PANEL
2ft HEAVY DUTY TIMBER
4ft HEAVY DUTY TIMBER
2ft HEAVY DUTY TIMBER
DD
AG
AG
AF
BLANK SIDE
BLANK SIDE
DETAIL A
BLANK SIDE
BLANK SIDE SCREW THROUGH
14
AH
DETAIL B
NAIL THROUGH
TIGERFLEX APEX BIKE SHED -
ASSEMBLY GUIDE
1
FLOOR INSTALLATION & SIDE PANEL ASSEMBLY.
INSTALL HEAVY DUTY TIMBER AS SHOWN. •
SECURE TO BASE USING 90mm SCREWS PROVIDED. •
NOTE - MAKE SURE FIXINGS GO THROUGH FLOOR JOISTS. •
2 SCREWS PER HEAVY DUTY TIMBER. •
SECURE BLANK SIDES TO EACH OTHER IN CORNERS USING 2X 50mm •
SCREWS PER JOIN. SEE DETAIL A.
SECURE PANELS TO FLOOR USING 65mm NAILS •
NOTE - MAKE SURE FIXINGS GO THROUGH FLOOR JOISTS OR INTO •
HEAVY DUTY TIMBER - SEE DETAIL B.

BLANK SIDE
BLANK SIDE
AIAI
AK
AK
AJ
DETAIL A
SCREW THROUGH
14
AL
DETAIL B
NAIL THROUGH
TIGERFLEX APEX BIKE SHED -
ASSEMBLY GUIDE
2
SIDE PANEL ASSEMBLY.
SECURE BLANK SIDES TO EACH OTHER IN CORNERS USING 2X 50mm •
SCREWS PER JOIN. SEE DETAIL A.
SECURE PANELS TO FLOOR USING 65mm NAILS •
NOTE - MAKE SURE FIXINGS GO THROUGH FLOOR JOISTS OR INTO •
HEAVY DUTY TIMBER - SEE DETAIL B.

DOOR SIDE LH
DOOR HEADER
DOOR SIDE RH
DOOR BASE
C
D
DETAIL C
SHOWING RH SIDE
SCREW THROUGH
SCREW THROUGH
SCREW THROUGH
SCREW THROUGH
DETAIL D
SHOWING LH SIDE
TIGERFLEX APEX BIKE SHED -
ASSEMBLY GUIDE
3
DOOR PANEL ASSEMBLY.
SCREW HEADERS TO THE SIDES AS SHOWN (LH & RH) 50mm SCREWS - •
SEE DETAIL C.
NOTE - CUSTOMER TO PRE-DRILL HOLES TO REDUCE CHANCES OF •
WOOD SPLITTING.
SCREW BASE TO THE SIDES AS SHOWN (LH & RH) - SEE DETAIL D. •
CHECK FRAME IS SQUARE BY MEASURING ACROSS CORNERS. •

E
4
DETAIL E
3 SCREWS PER HINGE
6 HINGES TOTAL
E
BB
BB
BC
BD
SECTION
BB-BB
SCALE
1 : 15
6
DOOR TOP DETAIL
MARK POSITION OF DROP BOLT ON
DOOR HEADER AND DRILL HOLE
DOOR HEADER
DOOR RAIN
COVER
DROP BOLT
DOOR BASE DETAIL
MARK POSITION OF DROP BOLT ON
DOOR BASE AND DRILL HOLE
DROP BOLT
DOOR BASE
TIGERFLEX APEX BIKE SHED -
ASSEMBLY GUIDE
4
DOOR INSTALLATION.
LAY ASSEMBLED DOOR SIDE PANEL ON A FLAT SURFACE •
PLACE DOORS INTO OPENING. •
LEAVE APPROX 4mm GAP AT SIDE BETWEEN DOOR AND SIDE PANEL. •
LEAVE APPROX 6mm GAP AT TOP BETWEEN DOOR AND SIDE PANEL. •
SECURE IN PLACE USING 3X 25mm BLACK SCREWS PER HINGE - 6 HINGES TOTAL. •

DOOR SIDE ASSEMBLY
SEE SHEET 3
ASAS
AU
AU
AT
SECTION
AS-AS
SCALE
1 : 25
DD
G
DETAIL A
SCREW THROUGH
14
AV
SECTION
AU-AU
SCALE
1 : 25
DETAIL B
NAIL THROUGH
TIGERFLEX APEX BIKE SHED -
ASSEMBLY GUIDE
FINIAL
x2 PER SHED
PLAYHOUSE LADDER
x1 PER SHED
VERANDA RAIL 1
x1 PER SHED
INTERNAL FLOOR PANEL
x1 PER SHED
BARGE BOARDS
x4 PER SHED
WINDOW GABLE
x1 PER SHED
SUPPLIED WITH x3 PERSPEX WINDOWS
FLOOR PANEL
x1 PER SHED
ROOF PANEL
x2 PER SHED
BLANK SIDE
x1 PER SHED
DOOR SIDE
x1 PER SHED
SUPPLIED WITH x2 PERSPEX WINDOWS
BLANK GABLE
x1 PER SHED
CORNER STRIP
x4 PER SHED
5
DOOR ASSEMBLY INSTALL.
SECURE BLANK SIDES TO EACH OTHER IN CORNERS USING 2X 50mm •
SCREWS PER JOIN. SEE DETAIL A.
SECURE PANELS TO FLOOR USING 65mm NAILS •
NOTE - MAKE SURE FIXINGS GO THROUGH FLOOR JOISTS OR INTO •
HEAVY DUTY TIMBER - SEE DETAIL B.

6FT APEX GABLE TOP
6FT APEX GABLE TOP
117
300.00
F
ROOF INSTALL DETAIL
STAGE 1
ROOF PANEL
ROOF PANEL
GABLE TOP
117
300.00
BJ
ROOF INSTALL DETAIL
STAGE 2
TIGERFLEX APEX BIKE SHED -
ASSEMBLY GUIDE
6
FIX GABLE TOPS TO THE EXISTING BUILT STRUCTURE
SECURE THROUGH SIDE PANELS USING 2X 50mm SCREWS •
PER GABLE TOP
ATTACH ROOF PANELS AS SHOW
SECURE TOGETHER USING 3x 50mm SCREWS. •
SECURE TO GABLE TOPS USING 4x 50mm SCREWS PER •
ROOF PANEL.

BARGE BOARD
BARGE BOARD
BARGE BOARD
BARGE BOARD
FINIAL
FINIAL
117
300.00
BL
TIGERFLEX APEX BIKE SHED -
ASSEMBLY GUIDE
7
BARGE BOARDS & FINIAL ASSEMBLY
FIT BARGE BOARDS TO THE ROOF, TRAPPING OVERHANGING END OF •
THE FELT IN BETWEEN TO PROVIDE A WEATHERPROOF SEAL.
USE 2X 40mm NAILS PER BARGE BOARD. •
FIT FINIAL USING 2X 40mm NAILS •
FELT THE ROOF
ROLL OUT FELT ALONG LOWER PART OF ROOF, LEAVING SUFFICIENT •
OVERHANG TO FOLD DOWN ONTO ROOF PURLIN, APPROX. 75mm (3
INCHES).
NOT ENOUGH TO FOLD UNDERSIDE OF ROOF. •
USE CLOUT NAILS TO TACK TOP OF FELT INTO THE ROOF PANEL. REPEAT •
FOR OTHER SIDE.
FOLD THE OVERHANGING FELT AT GABLE ENDS UNDER ROOF PANEL •
AND TACK IN PLACE.
RIDGE PIECE SHOULD OVERLAP THE LOWER STRIPS AND TACK INTO •
PLACE.

COVER LAT
COVER LAT
COVER LAT
COVER LAT
COVER LAT
117
300.00
BL
TIGERFLEX APEX BIKE SHED -
ASSEMBLY GUIDE
8
COVER LATS & CORNER STRIPS
USE 3X 40mm NAILS TO SECURE IN PLACE - MAKE SURE JOIN IS COVERED •
COVER LATS & CORNER STRIPS WILL NEED TRIMMING TO SUIT. •