TiiTENT Hill200 User manual

1
If you want to have a beautiful pyramid tent, please adjust the pegging
points and the webbing straps of the four corners in accordance with the
terrain. Using brutal force will not help the tent stand tall and may
damage the tent. Be sure to zip up before setting up the tent.
Note
Outertent
Innertent
Buckle
rope
All contents contained in a large carrying bag.
After opening, there will be a bundle of cloth rolls fixed with a buckle rope.
PoleBag
Long pole U-shaped pole
PegSet
Peg
Top pole Vestibule pole guy rope
for top pole
1. Content

2
128128
210210
120120
140140
232232
230230
Outer tent size
Inner tent size
2. Dimension

3
3. Set up the tent
1. Spread out the inner tent and identify the
sleeves on the top of the tent. The front
door sleeve is shorter and the rear door
sleeve is longer.
Inner tent
Long pole
U-shaped pole
2. Insert the U-shaped pole into the short
front door sleeve and straight pole into
the long sleeve.
3. Erect the two poles with the poles crossing each other. Insert the pins of the ring
& pin connectors at the bottom corners of the tent into the ends of the poles.
Secure the crossing points of the two poles using olive buckles.
the pins of
the pin & ring
The buckle must be on
the top of the strap.

4
4. You need to stake the inner tent first before
setting up the outer tent. Therefore, please
decide the camping base before pegging.
pegging place
guy rope
for top pole
top pole
5. Hook the guy rope for top pole to the
exposed part of the poles inserted in
the front and rear sleeves.
6. Insert the top pole
into the sleeves on
both sides of the guy
rope for top pole.
7. Spread out the outer tent and put it over the
inner tent. Flatten out the outer tent and fasten
the four male buckles at the bottom of the fly to
the female buckles on the inner tent.
8. Pull the rope on the pointed end of the
front door to tighten it properly and stake
it down to the ground. Now you can enjoy
your time with Hill200.
female buckle

140
210
120
170
5
The space of the inner tent is 210x140cm
Can easily accommodate 2 adults
4. Space
Hill200 internal accommodation
Height scale

5. Pack away the tent
6
Pack away the inner tent: Pack away the outer tent:
1. Divide it into three equal parts and
fold the sides towards the center.
2. Fold it in half (short end to short end)
3. Put it over the outer tent
Opening of the tent
1. Pull up the four top
corners of the outer
tent with the front
door facing down.
2. Fold it in half (short end to short end)
3. Fold the edge
inward
4. Fold it in half
(short end to short end)
5. Place it under the
inner tent
Put the bag of poles and the bag of
pegs over the tent and roll up towards
the opening of the tent while squeezing
the air out slowly.
Buckle up and tighten
the rope before putting
it into the tent bag.

7
6. Notes
1. The MuchaTent is made of TC materials. During the initial uses,
the tent must absorb moisture to help the internal fiber expand
to bring out the best out of the fabric. If the fiber is not fully
expanded initially, it may not provide expected waterproof
performance and water may seep through the tent when raining,
which is normal and will disappear after a few uses.
2. When using the product, make sure all pegs and wind-resistant
guy lines are fastened so the tent can provide the best
performance.
3. This product is not flame resistant. Do not light a fire inside the
tent in case any irreversible or irreparable damage is caused. Be
careful of fire, lack of oxygen, and carbon monoxide poisoning
when using heaters in the tent. Please set up the tent in a
location with good ventilation and drainage and without natural
and manned disasters.
4. Be aware of the weather. Please leave the campsite for a safe
location in accordance to your evacuation plan if the weather
gets bad. In the case of inclement weather or strong winds,
please check your tent thoroughly to make sure all pegs and guy
lines are fastened.
5. Before using the tent for the first time, please try to set up the
tent and confirm the accessories and the steps for setting up the
tent. To ensure the tent is used appropriately, please learn and
understand how to use it. Please contact the vendor for any
malfunctions.

8
6. Despite the good ventilation of the tent, it is not fully
condensation-proof. Depending on the location of the site,
condensation may occur inside the tent. Make sure the tent is
properly ventilated.
7. Due to the color, thickness, and surface treatment of the fabric,
wrinkles, uneven colors, knots caused by threads wound
unevenly, white lines on the surface of the tape, or lines and
indentation caused by folding may occur during manufacturing,
which are normal and will not affect its functionality.
8. Due to the weaving methods of the fabric, there may be slight
differences in colors between vertical and horizontal stripes in
the sunlight which is normal and will not affect its functionality.
9. The TC fabric does not guarantee 100% water tightness because
there is no water-proof tape on the seams.
10. If water seeps through the stitches or seams, you can enhance
the tent using tent seam sealers sold on market.

9
Emergency Responses
With proper use and maintenance, the TiiTENT product can stay in
good quality. Please be aware of the following important
information to prevent damage to the product:
1. Accidents may damage the poles and fabric. Please bring repair kits
(duct tape, guy lines, and tubes for reinforcements) with you at all
times for immediate use.
2. If damage to the product is not fixed immediately, it may result in
serious and even irreparable harm. If the fabric is torn or broken,
please place duct tape over both sides of the fabric to prevent the
damage from spreading or remove the damaged fabric.
3. Prolonged exposure to sunlight can cause colors to fade, weakening
the strength of the fabric. Please bear in mind that the tent is not
intended for use in prolonged settings in which they remain
exposed to the sun. When the degradation caused by sunlight
exceeds the endurance limit of the fabric, the damage will become
permanent.
4. If the product is constantly damp, mold, stinky smells, color bleed,
or fabric degradation may occur. Therefore, please make sure the
product is fully dry before attempting to store it.
5. If the fabric becomes moldy due to humidity, the mildew might not
be removed. However, please remove the mold on the surface and
disinfect the fabric with alcohol. If the fabric is damaged by mold,
leakage will occur.