tilebar Alma User manual

p. 1
INSTALLATION GUIDE Alma Collection
STEP 2STEP 1
2
1Drill holes in the wall to install the Decox System in the next step.
2 Screw the Decox System to the wall.
3Adjust the position screwing the screws.
O 6
2
1Drill holes in the wall to install the Decox System in the next step.
2 Screw the Decox System to the wall.
3Adjust the position screwing the screws.
O 6
• Screw the Decox System to the wall.• Drill holes in the wall to install the Decox System in the next step.
2
1Drill holes in the wall to install the Decox System in the next step.
2 Screw the Decox System to the wall.
3Adjust the position screwing the screws.
O 6
2
1Drill holes in the wall to install the Decox System in the next step.
2 Screw the Decox System to the wall.
3Adjust the position screwing the screws.
O 6

p. 2
INSTALLATION GUIDE Alma Collection
STEP 3
2
1Drill holes in the wall to install the Decox System in the next step.
2 Screw the Decox System to the wall.
3Adjust the position screwing the screws.
O 6
2
1Drill holes in the wall to install the Decox System in the next step.
2 Screw the Decox System to the wall.
3Adjust the position screwing the screws.
O 6
• Adjust the position screwing the screws.

p. 3
INSTALLATION GUIDE Alma Collection
STEP 5STEP 4
3
5 Screw the main body to the wall in order to bring more security to the installation.
4 Drill an extra hole using the decox system as a guide to bring a major strength to the union
3
5 Screw the main body to the wall in order to bring more security to the installation.
4 Drill an extra hole using the decox system as a guide to bring a major strength to the union
• Drill an extra hole using the Decox System as a guide to bring major
strength to the union.
• Screw the main body to the wall in order to bring more security to the
installation.

p. 4
INSTALLATION GUIDE Alma Collection
ADJUSTING (IF NEEDED)
4
+
2
1
+1.5
2
3
3
1
2
3
ADJUSTING If needed

p. 5
INSTALLATION GUIDE Alma Collection
ADJUSTING (IF NEEDED) MAINTENANCE, CARE & EXTRAS
5
Gloss lack:
To keep clean the lack surface it is recomended to use a soft cotton cloth moisted with water. For a thorough
cleaning, use solvent free glass cleaners and then dry it with a soft cloth.
Metallic parts:
It is strongly recomended to begin using a damp cloth and then dry it carefully with a soft cloth.
Marble:
To clean marble parts it is only needed to use neutral pH detergent. Avoid using glass cleaners, generic
detergents or any other product not specically labeled to be used on marble surfaces.
N
H
O
ã áå =OKR
HO
JN
4
+ 2
- 1
min 2 mm
MAINTENANCE, CARE AND EXTRAS
Gloss:
For regular cleanings, use a soft cotton
cloth dampened with water. For a thorough
clean, use solvent-free glass cleaners and
dry with a soft cloth.
Metallic parts:
It is strongly recommended to clean with
a damp cloth and dry carefully with a soft
cloth.
Marble:
To clean marble, use a PH-neutral clean-
ing formula. Avoid using glass cleaners,
generic cleaners, or any othe rproduct not
specically labeled to be used on marble
surfaces.

p. 6
INSTALLATION GUIDE Alma Collection
Screws
T-Nut Lucite Topper
Metal Leg
Threaded Rod
LEG INSTALLATION (OPTIONAL)
STEP 1
STEP 2
• Remove T-nut from assembled leg in box.
• Attach T-nut to the base of the vanity as shown.
• Attach the assembled leg to the t-nut.
• To tighten, hold the lucite topper in place & rotate the leg.
• Installation complete.
* Legs are decorative only and do not offer any free standing support. Vanity must be properly mounted to the wall as shown in this guide.