fantastic furniture Seaforth Bookcase Lowline User manual

Version 2.0
www.fantasticfurniture.com.au
Bookcase lowline
Seaforth

www.fantasticfurniture.com.au PAGE 2www.fantasticfurniture.com.au PAGE 2
Enjoy
Your purchase from
Australia’s Best Value Furniture Store
RECOMMENDED WEIGHT CAPACITY 15 KG PER SHELF
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been fitted with a wall
strap to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are
not included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to
use.

www.fantasticfurniture.com.au PAGE 3
Assembly checklist
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
Useful Information
! Never use power tools unless specically instructed. They can damage your components or
hardware if used incorrectly
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not t through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! If you are having any di󰀩culties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.

www.fantasticfurniture.com.au PAGE 4
What you need
to assemble the product
Left side frame
(P1)
Square
frame
(P9)
Threaded
rod
2 × (H1)
Shelf
screw
32 × (H2)
Frame
screw
26 × (H3)
Allen
key
1 × (H4)
Wall
strap
2 × (H5)
Right side
frame (P2)
Vertical
frame bar
(P10)
Top
frame bar
(P3)
Bottom
frame bar
(P4)
Horizontal
Frame bar
(P12)
Parts list
Box 1: Left Side Frame (P1) and Right Side Frame (P2); Top Frame Bars (P3 x 2); Bottom Frame Bars (P4 x 2);
Bottom Middle Front & Back Bars (P5 & P6); Top Middle Front and Back Bars (P7 and P8); Square Frame (P9);
Vertical Frame Bars (P10 x 4); Legs (P11 x 2); Horizontal Frame Bars (P12 x 2); Top and Bottom Shelves (P13 x 2);
Large shelves (P14 x 2); Short shelf (P15).
Top/bottom shelf
(P13)
Top/bottom shelf
(P13)
Large shelf
(P14)
Large shelf
(P14)
Short shelf
(P15)
Bottom middle
front bar
(P5)
Bottom middle
back bar
(P6)
Top middle
front bar
(P7)
Top middle
back bar
(P8)
Legs
(P11)
Vertical
frame bar
(P10)
Nut
2 × (H6)
Washer
4 × (H7)
Wall strap
screw
2 × (H8)
Other tools you need
Phillips head screwdriver
Spanner
1 × (H9)
Allen
key
1 × (H10)

www.fantasticfurniture.com.au PAGE 5
.
Step 1
Attach Top Frame Bars (P3 x 2) to the Left Side Frame (P1) using Frame Screws (H3) by
tightening with the Allen key (H4). Attach Bottom Frame Bars (P4 x 2) to the Left Side
Frame (P1) using Screws (H3) by tightening with the Allen Key (H4).
Repeat above steps to attach the Right Side Frame (P2).
You will need
Frame screw
8 × (H3)
Allen key
1 × (H4)
(P1)
(H3)
(H3)
(H3)
(H3)
(H3)
(P3)
(H3)
(H3)
(H3)
(P2)
(P4)
Note: Please only tighten the Frame
Screws (H3) 80%, when shelves
have been added, the frame screws
(H3) can be tightened 100%
NOTE: Before securing, ensure that the protruding
metal screw tabs on the Top and bottom frame bars
(P3 & P4) are rotated so the tabs are facing the
inside of the bookcase. These will be used to secure
and support the Top and bottom shelves (P13).
80%
NOTE: During transit the metal
screw tabs may become slightly
bent. Ensure screw tabs on all frame
bars are straight before securing
screws.

www.fantasticfurniture.com.au PAGE 6
.
Step 2
Attach Legs (P11 x 2) and Vertical Frame Bars (P10 x 2) to Bottom Frame Bars (P4) using
the Threaded Rods (H1).
You will need
Threaded rod
2 × (H1)
(H1)
(P11)
(P10)
(P11)
(P4)
(P4)

www.fantasticfurniture.com.au PAGE 7
Step 3
You will need
Frame screw
4 × (H3)
Allen key
1 × (H4)
Attach Bottom Middle Front and Back Bars (P5 and P6) to Left Side Frame (P1)using
Frame Screws (H3) by tightening with the Allen Key (H4). Ensure the screw holes on the
Frame Bars (P5 and P6) are facing upwards on all bars before securing.
Attach Bottom Middle Front and Back Bars (P5 and P6) to the Vertical Frame Bars (P10)
using Frame Screws (H3) by tightening with the Allen Key (H4).
(P5)
(P6)
(H3)
(H3)
(H3)
(H3)
Note: Please only tighten the frame
screws (H3) 80%, when shelves have
been added, the frame screws (H3)
can be tightened 100 %
(P1)
(P10)
NOTE: Before securing, ensure that the protruding
metal screw tabs on the Bottom middle front and
back frame bars (P5 & P6) are rotated so the tabs
are facing the inside of the bookcase. These will be
used to secure and support the Large shelf (P13).
80%
(P10)
80%

www.fantasticfurniture.com.au PAGE 8
Step 4
(P8)
You will need
Frame screw
2 × (H3)
Allen key
1 × (H4)
(P7)
(H3)
(H3)
Note: Please only tighten the frame
screws (H3) 80%, when shelves has
been added, the frame screws (H3)
must be tightened 100 %
NOTE: Before securing ensure that the protruding
metal screw tabs on the Top middle front and back
frame bars (P7 & P8) are rotated so the tabs are
facing the inside of the bookcase. These will be
used to secure and support the Large shelf (P13).
(P1)
Attach Top Middle Front and Back Bars (P7 and P8) to Left Side Frame (P1) using
Frame Screw (H3) by tightening with the Allen Key (H4). Ensure the screw holes on the
Frame Bars (P7 and P8) are facing upwards on all bars before securing.
80%

www.fantasticfurniture.com.au PAGE 9
Step 5
You will need
Frame screw
4 × (H3)
Allen key
1 × (H4)
Attach Square Frame (P9) to the end of the Frame Bars (P5, P6, P7 and P8)
using Frame Screws (H3) by tightening with the Allen Key (H4).
Note: Please only tighten the frame
screws (H3) 80%, when shelves have
been added, the frame screws (H3)
can be tightened 100 %
(P9)
(H3)
(H3)
(H3)
(H3)
(P8)
(P7)
(P5)
(P6)
80%
NOTE: Before securing ensure that the protruding
metal screw tabs on the Square Frame (P9) are
rotated so the tabs are facing the inside of the book-
case. These will be used to secure and support the
Large shelf (P13).

www.fantasticfurniture.com.au PAGE 10
Step 6
Attach Vertical Frame Bars (P10 x 2) to Top Frame Bars (P3) and Top Middle
Back and Front Frames (P7 and P8) using Frame Screw (H3) by tightening with
the Allen Key (H4).
Note: Please only tighten the frame
screws (H3) 80%, when shelves have
been added, the frame screws (H3)
can be tightened 100 %
(H3)
(H3)
(H3)
(H3)
(P10)
You will need
Frame screw
4 × (H3)
Allen key
1 × (H4)
(P3)
(P8)
(P7)
80%
(P3)

www.fantasticfurniture.com.au PAGE 11
Step 7
Attach Horizontal Frame Bars (P12 x 2) to the Square Frame (P9) and Right Side Frame
(P2) using Frame Screws (H3) by tightening with the Allen key (H4).
(P12)
(H3)
(H3)
(H3)
(H3)
Note: Please only tighten the frame
screws (H3) 80%, when shelves have
been added, the frame screws (H3)
can be tightened 100 %
You will need
Frame screw
4 × (H3)
Allen key
1 × (H4)
(P9)
(P2)
80%
(P12)

www.fantasticfurniture.com.au PAGE 12
Step 8
You will need
Allen key
1 × (H4)
Place Top and Bottom shelves (P13 x 2) into the assembled top and bottom shelving frame.
Place Short and Large Shelves (P14 x 2) and (P15) into the remaining shelving frames.
When shelves (P13 x 2, P14 x 2 and P15) have been placed, tighten all Screws (H3) 100%
by using the Allen Key (H4).
(P13)
(P14)
(P14)
(P13)
(P15)
100%
100%

www.fantasticfurniture.com.au PAGE 13
Step 9
You will need
Shelf screw
32 × (H2)
Phillips Head
Screwdriver
Secure all Shelves (P13 x 2, P14 x 2 and P15) to the assembled bookcase frame
using Shelf Screws (H2) using Phillips Head Screwdriver.
(H2)
(P2)
(P1)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2) (H2)
(H2)
(H2)
(H2)
(H2)
(P14)
(P14)
(P15)

www.fantasticfurniture.com.au PAGE 14
Step 10
(H5)
(H5)
(H6)
(H6)
(H7)
(H7)
(H8)
(H8) (P1) (P2)
(H5)
(H6)
(H7) (H8)
Use the Wall Strap Screw (H8), Washer (H7) and Nut (H6) to connect the Wall Strap (H5) to
the Right and Left Frames (P1 & P2) using the Allen Key (H10) and Spanner (H9).
You will need
Wall Strap
2 x (H5)
Nut
2 x (H6)
Washer
2 x (H7)
Wall Strap
Screw 2 x (H8)
Allen Key
1 x (H10)
Spanner
1 x (H9)
We strongly advise that you use the
wall straps provided to prevent the unit
from toppling

www.fantasticfurniture.com.au PAGE 15
Step 11
Step 12
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
Move furniture to its nal position then
connect the Wall Strap (H5) to the wall.
make sure it is rmly attached and a snug t.
Screws and wall plugs are not
provided, please use appropriate
xtures for your wall.
Seek advice from a qualied trades
person on how to attach this to your
specic wall.
You will need
Washer
2 × (H7)
(H7)